Root/
| Source at commit 121acf6ffad8f1bcd4b08e50e293e597880b68eb created 10 years 11 months ago. By Werner Almesberger, tornado/cpu/cpu.brd: make connection to the MCU's GND pad straighter | |
|---|---|
| 1 | MKMK=../../../../cae-tools/cameo/templates/mkmk-simple |
| 2 | |
| 3 | NAME=cpu |
| 4 | |
| 5 | # 11.5, 0 |
| 6 | |
| 7 | BOARD = X0=70.0mm Y0=3.0mm BOARD_Z=1.6mm CLEARANCE=3mm |
| 8 | |
| 9 | # drill: 12.5-13.5 mil |
| 10 | # mill: 35 mil (889 um) endmill, 3 mil (76 um) deflection |
| 11 | # |
| 12 | TOOLS = DRILL=7mil,15mil MILL_IN=32mil MILL_OUT=32mil ANY=any |
| 13 | |
| 14 | #FAB = ROT=90 X=0 Y=1 XN=1 YN=2 |
| 15 | FAB = ROT=90 X=0 Y=0 XN=1 YN=2 |
| 16 | |
| 17 | .PHONY: all clean |
| 18 | |
| 19 | all: Makefile.mkmk |
| 20 | |
| 21 | Makefile.mkmk: $(MKMK) ../$(NAME).drl ../$(NAME)-PCB_Edges.gbr Makefile |
| 22 | $(MKMK) NAME=$(NAME) $(BOARD) $(TOOLS) $(FAB) |
| 23 | |
| 24 | ../$(NAME).drl: ../$(NAME).brd |
| 25 | pcbnew --drill `pwd`/../$(NAME).brd |
| 26 | touch $@ |
| 27 | |
| 28 | ../$(NAME)-PCB_Edges.gbr: ../$(NAME).brd |
| 29 | pcbnew --plot=gerber --layers=PCB_Edges `pwd`/../$(NAME).brd |
| 30 | |
| 31 | -include Makefile.mkmk |
| 32 | |
| 33 | clean:: |
| 34 | rm -f Makefile.mkmk |
| 35 | |
Branches:
master
tornado-v1
