Root/
| 1 | Universal Breakout Board (8:10 card) |
| 2 | ==================================== |
| 3 | |
| 4 | The Universal Breakout Board (UBB) is designed for soldering to a |
| 5 | 50 mil (1.27 mm) ribbon cable. A 5 mm landing zone is provided next |
| 6 | to the solder pads for gluing the cable to the PCB. |
| 7 | |
| 8 | Furthermore, an 1.5 mm wide overshoot space for coating is left |
| 9 | between the solder pads and the temporarily inserted zone. |
| 10 | |
| 11 | The board thickness should be 1/32" (0.8 mm). The board can be |
| 12 | single-sided or double-sided. In the latter case, a via connects |
| 13 | the back side to ground. |
| 14 |
Branches:
master
