Ben NanoNote Case Scans

There are the following categories of scans: Scans are stored in the following file formats: PIJ, the binary and proprietary format of Dr.PICZA3 project files, AutoCAD DXF, STL, and the point cloud with comma-separated values.

PIJ is the native format of the software used to make the scans. STL can be read by many programs, including HeeksCAD and MeshLab.

High resolution scans can produce a large amount of data. If a file is 1 MB or bigger, its size is indicated.


Assemblies of multiple parts

Complete device. Bottom up.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1.5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 10 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 53 h
PIJ 4.9 MB DXF 5.9 MB STL 9.1 MB TXT(CSV) 1.5 MB

Battery and cover removed. Bottom up.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 4 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 11.5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 140 h
PIJ 4.9 MB DXF 6.1 MB STL 9.5 MB TXT(CSV) 1.5 MB

Complete device. From the top.

Planned

Planned

Under consideration

X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 2 h
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 10 h
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 53 h

LCD module on PCB. Display side.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 3 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 34 h
PIJ 3.4 MB DXF 3.7 MB STL 5.5 MB TXT(CSV) 1.0 MB


Individual parts

Display, outer shell. Outside.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 44.5 h
PIJ 3.8 MB DXF 4.7 MB STL 7.2 MB TXT(CSV) 1.2 MB

Display, outer shell. Inside.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1.25 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 6 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 86 h
PIJ 3.7 MB DXF 4.8 MB STL 7.3 MB TXT(CSV) 1.2 MB

Display shell, base structure. Back side.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 3.75 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 48 h
PIJ 3.9 MB DXF 5.4 MB STL 8.0 MB TXT(CSV) 1.3 MB

Display shell, base structure. Front side.
Note: the solvent used to remove the adhesive tape attacked the plastic, leaving some small dents and deformations.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 4 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 12 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 58 h
PIJ 4.8 MB DXF 5.5 MB STL 8.3 MB TXT(CSV) 1.4 MB

LCD PCB. Back side.

Planned

Planned

Planned

X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: ?
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: ?
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: ?

LCD PCB. Front side.

Planned

Planned

Planned

X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: ?
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: ?
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: ?

LCD frame. Back side.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 2.25 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 41.75 h
PIJ 3.1 MB DXF 2.6 MB STL 4.6 MB TXT(CSV)

LCD frame. Front side.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1.25 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 3.75 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 37.5 h
PIJ 2.9 MB DXF 2.4 MB STL 4.1 MB TXT(CSV)

Frame on top of the base. Top.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1.5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 3.75 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 37.5 h
PIJ 2.7 MB DXF 2.4 MB STL 4.2 MB TXT(CSV)

Frame on top of the base. Bottom.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1.5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 4 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 41.5 h
PIJ 2.8 MB DXF 2.5 MB STL 4.4 MB TXT(CSV)

Keyboard. From the top. A-to-L scan.
Note: the soft rubber sheet underneath the keyboard was sometimes bent by the scanner's needle, leaving what appears to be a ragged edge.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 34 h
PIJ 3.2 MB DXF 3.8 MB STL 6.2 MB TXT(CSV) 1.0 MB

Keyboard. From the bottom. L-to-A scan.
Note: the scanner gets trapped when trying to scan the rubber surrounding the power button. The higher resolution scans therefore stop before this point.
The scans are also very noisy, probably because the fixture was not rigid enough.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 2.25 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 36 h
PIJ 3.1 MB DXF 4.2 MB STL 7.2 MB TXT(CSV) 1.1 MB

Main PCB. Keyboard side.

In progress

X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1.5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 3.5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: ?

Main PCB. Component side.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 2.5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 8.5 h
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 49 h
PIJ 4.5 MB DXF 4.9 MB STL 8.2 MB TXT(CSV) 1.3 MB

Bottom shell without battery cover. Inside.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 2 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 56 h
PIJ 4.0 MB DXF 4.5 MB STL 7.4 MB TXT(CSV) 1.2 MB

Bottom shell without battery cover. Outside.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1.25 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 4.25 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 48.5 h
PIJ 4.0 MB DXF 4.4 MB STL 7.2 MB TXT(CSV) 1.2 MB

Battery. PCB side.

Planned

Planned

Planned

X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: ?
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: ?
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: ?

Battery. Cover side.

Planned

Planned

Planned

X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: ?
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: ?
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: ?

Battery cover. Inside.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1.5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 33.5 h
PIJ 1.9 MB DXF 1.9 MB STL 2.9 MB TXT(CSV)

Battery cover. Outside.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 1.5 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 3 h
PIJ DXF STL TXT(CSV)
X/Y step size: 100 μm.
Z resolution: 25 μm.
Approximate scan time: 20 h
PIJ 1.9 MB DXF 1.8 MB STL 2.8 MB TXT(CSV)


Detail magnifications

Main PCB. Rear of speaker.
Main PCB. Crystals. Component side.
Main PCB. Buzzer. Component side.
Approximate scan time: 5.5 h
X/Y step size: 100 μm.
Z resolution: 25 μm.
PIJ DXF STL 1.0 MB TXT(CSV)
Approximate scan time: 1.5 h
X/Y step size: 100 μm.
Z resolution: 25 μm.
PIJ DXF STL TXT(CSV)
Approximate scan time: 6.75 h
X/Y step size: 100 μm.
Z resolution: 25 μm.
PIJ DXF STL TXT(CSV)

Bottom shell with PCB. Front of speaker.
Bottom shell with PCB. Central support.
Note: I added a 1 mm wedge between the
speaker and the hinge to hold the PCB down.
Approximate scan time: 11.5 h
X/Y step size: 100 μm.
Z resolution: 25 μm.
PIJ DXF STL 1.2 MB TXT(CSV)
Approximate scan time: 0.25 h
X/Y step size: 100 μm.
Z resolution: 25 μm.
PIJ DXF STL TXT(CSV)


Drafts, for later rescan

Bottom shell without battery cover. Inside.
Note: the arrow in the battery area is from the support structure.
These scans were made with the display shell attached and therefore don't show the hinge correctly.
Please use the ben-bottom-inside2 series instead.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 4 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 14 h
PIJ DXF STL TXT(CSV)

Bottom shell plus PCB. Keyboard side.
These scans were made with the display shell attached and therefore don't show the hinge correctly.
X/Y step size: 1 mm.
Z resolution: DRAFT
Approximate scan time: 4 h
PIJ DXF STL TXT(CSV)
X/Y step size: 500 μm.
Z resolution: 25 μm.
Approximate scan time: 11 h
PIJ DXF STL TXT(CSV)


2010-10-03 06:35:54 UTC