Age Message
2 years 7 months atusb/atrf.sch: move invisible footprint test, to avoid confusing eeshow
2 years 7 months atusb/: use page layout similar to eeschema's traditional default
2 years 7 months atusb/: use ""VDD" symbol from kicad-libs
2 years 7 months atusb/: use VR, POWERED, and LED from kicad-libs
2 years 7 months atusb/atusb.pro: we don't use power.lib anymore
3 years 14 hours atusb/Makefile: add missing atusb back layer to upload target
3 years 2 months atusb/Makefile (upload): include atusb-Cmts.User.gbr; change upload dir
3 years 2 months atusb/atusb.kicad_pcb: bring back component references

The original had them printed in the silk screen. Do so too, but first
move them to suitable places (they all got relocated by the migration
to the new format).
3 years 2 months atusb/Makefile (f, b): swap mask and copper layers for better visualization
3 years 2 months atusb/Makefile (f, b, upload): convenience targets

Alas, the old "pretty" doesn't work anymore, due to some
incompatibility in coordinate systems. gerbv can handle the
"raw" output, though.
3 years 2 months atusb/atusb.kicad_pcb (C15): resolve silk screen on pad; add via
3 years 2 months atusb/atusb.kicad_pcb: grow RF feed trace to 1.9 mm, for 1.0 mm PCB

According to https://www.eeweb.com/toolbox/microstrip-impedance
it should be 2.0 mm to be perfect, but that would make it awfully
big. Also, we've erred a bit on the thin side in the original.
3 years 2 months atusb/atusb.kicad_pcb: bump date to 20160901
3 years 2 months atusb/atusb.kicad_pcb: add "sysmocom"
3 years 2 months atusb/atusb.cmp: remove (obsolete)
3 years 2 months atusb/atusb.kicad_pcb: reconnect ground; assign all zones to GND (from AGND)

Seems that the GND = AGND equivalence is not considered when checking
zones.
3 years 2 months atusb/atusb.kicad_pcb: update footprints and reconnect antenna
3 years 2 months makefiles/Makefile.kicad (BRD): board file type is now .kicad_pcb
3 years 2 months atusb/: convert to atusb.kicad_pcb; set solder mask clearance to 0 mm

Would be nice to have the two changes in separate commits, but
pcbnew doesn't like saving if there are no changes.
3 years 2 months atusb/: bring back AGND and DGND
3 years 2 months atusb/: new-style footprint table; use MEANDER-2450MHz-right-1.0mm-RELAXED
3 years 3 months web: update status and links on the webpage

Linux-wpan is way further now and the driver is already in
mainline. Make sure our page is a bit more accurate.
3 years 3 months atusb/usb.sch, atusb.pro: replace CONN_1 with TESTPOINT
3 years 3 months atusb/: use "r" and "c" from kicad-libs, instead of KiCad "device"

The latter even has incompatible changes. We really don't want that.
3 years 3 months atusb/: ATmega32U2 symbol was "lost"; update


interactive