Date:2011-06-07 01:26:18 (12 years 9 months ago)
Author:Werner Almesberger
Commit:90ee7262853cfdfb12015801c977093645928bf4
Message:prod/doc/: atrf-path now accepts keypresses from all the usual places

- setup.hmac, test.hmac: it's no longer necessary to "type into the
window" (i.e., with the focus there)
Files: prod/doc/setup.hmac (1 diff)
prod/doc/test.hmac (1 diff)

Change Details

prod/doc/setup.hmac
409409<PRE>
410410make spectrum
411411</PRE>
412Then place the devices appropriately and press <B>D</B> in the measurement
413window to use the displayed spectrum as the reference. Multiple spectra
412Then place the devices appropriately and press <B>D</B>
413to use the displayed spectrum as the reference. Multiple spectra
414414can be merged into the reference, e.g., if unavoidable environmental
415415variations cause
416416significant changes. Spectra included in the reference are shown in blue.
prod/doc/test.hmac
210210<A href="atrf-path.png"><IMG src="atrf-path-small.png"</A>
211211<P>
212212To finish the test, the operator must type either <B>P</B>, <B>F</B>,
213or <B>Q</B> in the window shown. <B>P</B> means "pass" and can only be
213or <B>Q</B>. <B>P</B> means "pass" and can only be
214214entered if the measurement is within the limits. <B>F</B> means "fail"
215215and can only be entered if the measurements is outside the limits.
216216<B>Q</B>, quit, can be entered at any time and also fails the test.

Archive Download the corresponding diff file



interactive