Root/atben/README-SMT

Source at commit 464ab40e3932a83b30626b99c4b658b4916fc24c created 5 years 6 months ago.
By Stefan Schmidt, Revert "atusb/fw/usb/: enable MCU reset on USB bus reset after config selection"
1Board characteristics:
2
3- two layers, components only on front
4- smallest components are 0402 and 0.5 mm pitch QFN
5- the following component orientation markings are on the silk screen:
6  B1: circle near pin 1
7  U1: triangle at the corner between pins 1 and 32
8  
9
10Design files:
11
12atben-front.png Illustration of the PCB's front side (with silk screen)
13atben-bom.csv Bill of materials
14atben-pos.csv Automatic insertion file (front only)
15atben-footprints.pdf Footprint reference drawings
16
17The PCB design files (Gerbers, etc.) are in a separate archive, atben-pcb-*
18
19
20Interpretation of files:
21
22- for all coordinates, the origin is the lower left corner of the board
23- coordinates in atben-pos.csv are in inches
24- rotation in atben-pos.csv is in degrees, counter-clockwise
25- in the footprint reference drawings, footprints are shown in the 0 degree
26  orientation and with their center at the crosshairs
27

Archive Download this file



interactive