IEEE 802.15.4 subsystem
Sign in or create your account | Project List | Help
IEEE 802.15.4 subsystem Git Source Tree
Root/
File | Age | Message | Size | |
---|---|---|---|---|
Source at commit 464ab40e3932a83b30626b99c4b658b4916fc24c created 5 years 9 months ago. By Stefan Schmidt, Revert "atusb/fw/usb/: enable MCU reset on USB bus reset after config selection" | ||||
.. | ||||
![]() |
20100925-msgs | |||
![]() |
Makefile | 10 years 1 month | Werner Almesberger: usrp/fft: one more analysis tool for antenna measurements | 133 bytes |
![]() |
README | 10 years 1 month | Werner Almesberger: usrp/README: change threshold to avoid making section reference look like a typo | 7.07 kB |
![]() |
avg.c | 10 years 2 months | Werner Almesberger: usrp/d: cleanup and allow number of samples to be set on command line | 844 bytes |
![]() |
doall | 10 years 1 month | Werner Almesberger: usrp/doall: usage and allow passing of arguments to evscan as well | 373 bytes |
![]() |
evscan | 10 years 1 month | Werner Almesberger: usrp: adjust outlier rejection and signal range for improved antennas | 358 bytes |
![]() |
fft.c | 9 years 10 months | Werner Almesberger: usrp/fft.c (do_fft): don't output the sample number when dumping | 5.43 kB |
![]() |
fscan | 10 years 1 month | Werner Almesberger: usrp/fscan: results are now quite stable, so 20 instead of 100 runs are enough | 609 bytes |
![]() |
peak.c | 10 years 2 months | Werner Almesberger: usrp/p: cleanup and more command-line control | 1.98 kB |
![]() |
plpk | 10 years 2 months | Werner Almesberger: usrp/plot: enable grid and accept center sensitivity from the command line | 333 bytes |
![]() |
plscan | 10 years 11 days | Werner Almesberger: usrp/plscan: comment out yrange (the experiments now cover all sorts of ranges) | 619 bytes |
![]() |
range | 10 years 1 month | Werner Almesberger: usrp/range: more useful diagnostic output and harden against underflows | 762 bytes |
![]() |
sps |
Download this version or git clone git://projects.qi-hardware.com/ben-wpan.git