Root/ecn/ecn0002.txt

Source at commit 850e9fca290d2354e97589ff1d5d684523218085 created 13 years 5 months ago.
By Werner Almesberger, More rm -rf to rm -f changes.
1Add load capacitors to 16 MHz crystal (C14, C15)
2
3
4The crystal has a specified load capacitance of 8 pF. The AT86RF230 has
5an internal capacitor array that can be trimmed in 16 steps from 0 pF to
64.5 pF.
7
8The crystal has a nominal tolerance of 15 ppm at 25 C plus a temperature
9tolerance of 15 ppm. The following deviations from 1 MHz at CLKM were
10measured with the CNTR board, roughly at 20-25 C:
11
12Board Error Meas. accuracy C14/C15 Trim
13        (f, ppm) (ppm, nom.) (pF) (pF)
14--------------- --------------- --------------- ------------ --------
152, "orange" +268 99.6 NC 0
16        +266 99.5 NC 0
17        +266 40.0 NC 0
18        +148 99.8 NC 3.0
19        +147 99.7 NC 3.0
20        +147 40.0 NC 3.0
21        +111 100.0 NC 4.5
22        +110 99.8 NC 4.5
23        - 13 99.9 15 0
24        - 14 100.0 15 0
25        + 11 99.9 12 0
26        + 11 99.6 12 0
27(cleanup) + 14 100.0 12 0
28        + 14 100.0 12 0
29
301, "red" +263 99.7 NC 0
31        +263 100.0 NC 0
32        +107 99.3 NC 4.5
33        +108 100.0 NC 4.5
34        + 24 99.8 10 0
35        + 24 100.0 10 0
36        - 9 99.7 10 4.5
37        - 9 100.0 10 4.5
38(cleanup) + 14 100.0 12 0
39        + 14 100.0 12 0
40
41(Multiple measurements to assess CNTR performance and drift. Note that
42CNTR measurements are repeatable within 1 ppm, so the nominal accuracy
43appears to be far too pessimistic.)
44
45
46Conclusion: these measurements suggest that, combined with parasitic
47capacitance, load capacitors of 12 pF make the crystal roughly half the
48trim range faster than 16 MHz.
49

Archive Download this file



interactive