Root/modules/INFO

Source at commit b51d442c317c76425cac446818ade6ccc43952c4 created 9 years 5 months ago.
By Werner Almesberger, atusb/fw/usb/dfu.c (config_descriptor): correct alt settings off-by-one error
1#
2# Tags:
3#
4# F Footprint name (must be first)
5# N Data sheet identifier (N tag of BOOKSHELF; can be omitted if equal to F)
6#
7
8# TI meandered inverted F antenna
9F: meander
10N: AN043
11
12# Common 4-pin crystal SMT package (pins 1 and 4 are on a short side, pin
13# numbering is counter-clockwise)
14F: xtal-4
15N: nx3225sa
16
17# 0805 package with six pads
18F: 0805-6
19
20#
21# MMCX board-edge (SMT) female jack
22#
23# Design based on Molex 73415-0961, This is also compatible with:
24#
25# Tyco 1408152-1
26# Emerson 135-3711-801
27# Molex 73415-1261
28# Amphenol 262107
29#
30# Note: footprint changes with PCB thickness !
31#
32# Known bugs:
33# - keepout area marker should be on comment layer
34# - pin 2 should be off-center and extend such that proper trace can be
35# connected directly
36#
37F: mmcx-f-edge
38N: 73415-0961
39
40# U.FL/Micro Coax/... receptacle
41F: u-fl-receptacle
42N: u.fl-receptacle
43

Archive Download this file



interactive