Root/atusb/fw/usb/usb.h

Source at commit ea23c905d32bfd2478915021476f9ede2ee014b8 created 6 years 3 months ago.
By Josef Filzmaier, atusb/fw: Introduction of a new board named HULUSB
1/*
2 * fw/usb//usb.h - USB hardware setup and standard device requests
3 *
4 * Written 2008, 2009, 2011, 2013, 2015 by Werner Almesberger
5 * Copyright 2008, 2009, 2011, 2013, 2015 Werner Almesberger
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 */
12
13
14#ifndef USB_H
15#define USB_H
16
17
18#include <stdbool.h>
19#include <stdint.h>
20
21
22/*
23 * Packet identifier types
24 */
25
26#define PID_OUT 0x1
27#define PID_IN 0x9
28#define PID_SOF 0x5
29#define PID_SETUP 0xd
30#define PID_DATA0 0x3
31#define PID_DATA1 0xb
32#define PID_ACK 0x2
33#define PID_NAK 0xa
34#define PID_STALL 0xe
35
36/*
37 * Descriptor types
38 *
39 * Reuse libusb naming scheme (/usr/include/usb.h)
40 */
41
42#define USB_DT_DEVICE 1
43#define USB_DT_CONFIG 2
44#define USB_DT_STRING 3
45#define USB_DT_INTERFACE 4
46#define USB_DT_ENDPOINT 5
47
48/*
49 * Device classes
50 *
51 * Reuse libusb naming scheme (/usr/include/usb.h)
52 */
53
54#define USB_CLASS_PER_INTERFACE 0
55#define USB_CLASS_COMM 2
56#define USB_CLASS_HID 3
57#define USB_CLASS_MASS_STORAGE 8
58#define USB_CLASS_HUB 9
59#define USB_CLASS_DATA 10
60#define USB_CLASS_APP_SPEC 0xfe
61#define USB_CLASS_VENDOR_SPEC 0xff
62
63/*
64 * Configuration attributes
65 */
66
67#define USB_ATTR_BUS_POWERED 0x80
68#define USB_ATTR_SELF_POWERED 0x40
69#define USB_ATTR_REMOTE_WAKEUP 0x20
70
71/*
72 * Endpoint type
73 */
74
75#define USB_ENDPOINT_TYPE_CONTROL 0
76#define USB_ENDPOINT_TYPE_ISOCHRONOUS 1
77#define USB_ENDPOINT_TYPE_BULK 2
78#define USB_ENDPOINT_TYPE_INTERRUPT 3
79
80/*
81 * Setup request types
82 */
83
84#define TO_DEVICE(req) (0x00 | (req) << 8)
85#define FROM_DEVICE(req) (0x80 | (req) << 8)
86#define TO_INTERFACE(req) (0x01 | (req) << 8)
87#define FROM_INTERFACE(req) (0x81 | (req) << 8)
88#define TO_ENDPOINT(req) (0x02 | (req) << 8)
89#define FROM_ENDPOINT(req) (0x82 | (req) << 8)
90
91/*
92 * Setup requests
93 */
94
95#define GET_STATUS 0x00
96#define CLEAR_FEATURE 0x01
97#define SET_FEATURE 0x03
98#define SET_ADDRESS 0x05
99#define GET_DESCRIPTOR 0x06
100#define SET_DESCRIPTOR 0x07
101#define GET_CONFIGURATION 0x08
102#define SET_CONFIGURATION 0x09
103#define GET_INTERFACE 0x0a
104#define SET_INTERFACE 0x0b
105#define SYNCH_FRAME 0x0c
106
107/*
108 * USB Language ID codes
109 *
110 * http://www.usb.org/developers/docs/USB_LANGIDs.pdf
111 */
112
113#define USB_LANGID_ENGLISH_US 0x409
114
115
116/*
117 * Odd. sdcc seems to think "x" assumes the size of the destination, i.e.,
118 * uint8_t. Hence the cast.
119 */
120
121#define LE(x) ((uint16_t) (x) & 0xff), ((uint16_t) (x) >> 8)
122
123#define LO(x) (((uint8_t *) &(x))[0])
124#define HI(x) (((uint8_t *) &(x))[1])
125
126
127#ifdef LOW_SPEED
128#define EP0_SIZE 8
129#else
130#define EP0_SIZE 64
131#endif
132
133#define EP1_SIZE 64 /* simplify */
134
135
136enum ep_state {
137    EP_IDLE,
138    EP_RX,
139    EP_TX,
140    EP_STALL,
141};
142
143struct ep_descr {
144    enum ep_state state;
145    uint8_t *buf;
146    uint8_t *end;
147    uint8_t size;
148    void (*callback)(void *user);
149    void *user;
150};
151
152struct setup_request {
153    uint8_t bmRequestType;
154    uint8_t bRequest;
155    uint16_t wValue;
156    uint16_t wIndex;
157    uint16_t wLength;
158};
159
160
161extern const uint8_t device_descriptor[];
162extern const uint8_t config_descriptor[];
163extern struct ep_descr eps[];
164
165extern bool (*user_setup)(const struct setup_request *setup);
166extern void (*user_set_interface)(int nth);
167extern bool (*user_get_descriptor)(uint8_t type, uint8_t index,
168    const uint8_t **reply, uint8_t *size);
169extern void (*user_reset)(void);
170
171
172#define usb_left(ep) ((ep)->end-(ep)->buf)
173#define usb_send(ep, buf, size, callback, user) \
174    usb_io(ep, EP_TX, (void *) buf, size, callback, user)
175#define usb_recv(ep, buf, size, callback, user) \
176    usb_io(ep, EP_RX, buf, size, callback, user)
177
178void usb_io(struct ep_descr *ep, enum ep_state state, uint8_t *buf,
179    uint8_t size, void (*callback)(void *user), void *user);
180
181bool handle_setup(const struct setup_request *setup);
182void set_addr(uint8_t addr);
183void usb_ep_change(struct ep_descr *ep);
184void usb_reset(void);
185void usb_init(void);
186
187void ep_init(void);
188
189#endif /* !USB_H */
190

Archive Download this file

Branches:
buffer-frames
master
stefan/rzusb
sysmocom

Tags:
2016-atusb-production-boot.hex
v0.2-atusb-fw
v0.3-atusb-fw



interactive