Root/atben/README-PCB

Source at commit eac6e3c70ba7b87fe07e3d7c88459d610bc7c76d created 8 years 8 months ago.
By Werner Almesberger, atben/README-PCB, atusb/README-PCB: various minor clarifications
1Board characteristics:
2
3- stacking: 2 layers, solder mask on front and back, silk screen on front
4- board material: FR4, thickness 0.8 mm (1/32"), 1 oz copper
5- surface finish: ENIG recommended
6- via holes: diameter is nominally 10 mil, but any size <= 15 mil can be used
7- mechanical tolerances: <= +/- 0.1 mm on all sides
8
9Layer stacking, from top to bottom:
10
11atben-SilkS_Front.gto Front silk screen
12atben-Mask_Front.gts Front solder mask
13atben-Front.gtl Front copper
14atben-Back.gbl Back copper
15atben-Mask_Back.gbs Back solder mask (empty)
16
17Other design files:
18
19atben-PCB_Edges.gbr Board edges, for routing (Gerber)
20atben.dxf idem (AutoCAD DXF)
21atben.drl Excellon drill file
22
23Interpretation of files:
24
25- for all coordinates, the origin is the lower left corner of the board
26- the center (!) of the board edge line marks the true board edge, e.g.,
27
28                             Edge line (5 mil)
29                        =======
30         ------- - - - - - ----------
31               | |
32   PCB outside | | PCB inside
33               | |
34         ------- - - - - - ----------
35                     |
36               Volume removed when cutting
37               (width depends on tool used)
38

Archive Download this file



interactive