IEEE 802.15.4 subsystem

Sign in or create your account | Project List | Help

IEEE 802.15.4 subsystem Updates

AgeSort asc/descChange
Prev 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 Next
Jun 12, 2011
8 years 2 months prod/atben (gpio_ben): in TRX_OFF, use that MISO is Z if nSS = H
Commit d135eb2c2a8498f8c57fe8ef699cd863f1aab12b, by Werner Almesberger
8 years 2 months prod/atusb: P_ON test turned out to be unreliable - skip it for now
Commit 13f4a35a62b5f0771423a7b179b59f51b6d6d340, by Werner Almesberger
8 years 2 months prod/atusb (TRX_OFF): walk all GPIOs. Also, use that MISO is Z if nSS = H
Commit 5f3cc767f824b85b6aebb54803025a540134c2aa, by Werner Almesberger
8 years 2 months prod/atusb (TRX_OFF): C5 was "x" for no good reason - changed to "H"
Commit fb80f514b8470d704289f9f6852c3047f8edd160, by Werner Almesberger
Jun 11, 2011
8 years 2 months atusb/fw/atusb.c (main): sleep (idle mode) while waiting for interrupts
Commit ce16a16f73a267a5ca6dd0fdd9ccd1d584fff00e, by Werner Almesberger
8 years 2 months atusb/fw/boot.c: adjusted the delay loop and don't race with dfu-util
Commit b42577bb72fb82ac5429034329652189ca94bf4c, by Werner Almesberger
8 years 2 months atusb/fw/usb/: we were busy-looping on TXINI. Mask the interrupt when idle.
Commit 376236949bddfab48aa5a633bf707b7c418ab1e4, by Werner Almesberger
8 years 2 months atusb/fw/: changed USB stack to use interrupts instead of polling
Commit d03beb22577b4b4ee01bcd02a5b3bb2e1b2b888d, by Werner Almesberger
8 years 2 months atusb/fw/usb/atu2.c: use implicit race-free "and" when writing to UDINT/UEINTX
Commit f9681e5b4f52ebdeed94f513c0ad3aa31b6a7f3d, by Werner Almesberger
8 years 2 months atusb/fw/: make timer code use interrupts instead of polling
Commit a69916da52293e0afbd53d413eccade52a315da3, by Werner Almesberger
8 years 2 months atusb/fw/: moved timer initialization to board_app.c as well
Commit 2acdaca218676655cfb182a355e39a133cbdc8e9, by Werner Almesberger
8 years 2 months atusb/fw/: added transition from runtime to DFU mode according to DFU spec
Commit 2d7ee914305cbde76e9fd1cd712476ba36b72f19, by Werner Almesberger
8 years 2 months atusb/fw/usb/: DFU_ITF_DESCR also needs a protocol argument
Commit 5f506117354d8763b7d6356d3c00ecc0b64af198, by Werner Almesberger
8 years 2 months atusb/fw/: moved common elements of DFU processing to dfu_common.c
Commit 2544004a86efc42adebb36931146999a08479ce6, by Werner Almesberger
8 years 2 months atusb/fw: revert most of the user_setups change and use simple callback instead
Commit bbe27fc357941a527a8edd92d56cfab421ea60a1, by Werner Almesberger
8 years 2 months atusb/fw/usb/dfu.h: define DFU interface descriptor, for later sharing
Commit 7a2c785e290e5d16ee4eda07fc409f8ebbfe144c, by Werner Almesberger
Jun 10, 2011
8 years 2 months atusb/fw/: define USB bus current (40 mA) in board.h based on measured value
Commit 3cc92cc4a671547bec6a89a61e2fd6708e6ac530, by Werner Almesberger
8 years 2 months atusb/fw/: SET_INTERFACE can now select among interfaces (changes user_setup)
Commit 89d13ce8f8b1314862bd10fd429ef5453dd9cf6e, by Werner Almesberger
8 years 2 months atrf-xmit: tightened checking of interrupt behaviour
Commit 4d4e132f0a4462edeff644a37a33d946aee1f256, by Werner Almesberger
8 years 2 months atusb/fw/board.c (reset_rf): increased 1 us delays to nominally 2 us
Commit 256ac01ab288da365cec3cd6628e2ffeb7bc7334, by Werner Almesberger


interactive