IEEE 802.15.4 subsystem

Sign in or create your account | Project List | Help

IEEE 802.15.4 subsystem Updates

AgeSort asc/descChange
Prev 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 Next
Dec 29, 2010
7 years 10 months atusb/cam2/mkmk: double backslash to put into generated makefile
7 years 10 months atusb.brd: added via from nRST/C2CK, to allow for addition of pull-up
7 years 10 months atusb.brd: increased zone clearance from 8 mil to 10 mil, for solderability
Dec 28, 2010
7 years 10 months atusb/Makefile: add --fill-all-zones to PLOT_BRD, to make sure zones are filled
7 years 10 months atusb/Makefile: move common plot command parts to variable $(PLOT_BRD)
7 years 10 months atusb: added "clean" targets to main and CAM makefile
7 years 10 months atusb/cam2/: streamlined CAM data processing, added generation of prerequisites
7 years 10 months atusb/Makefile: targets "front" and "back" to print layers for toner transfer
7 years 10 months atusb.brd: saving with the zones filled, to avoid surprises
Dec 20, 2010
7 years 10 months atusb/fw/common/config.h: corrected BOARD_xxx names in #if defined()
7 years 10 months atusb/cam2/mkmk: compensate deflection when cutting the board outline
7 years 10 months atusb: more small layout improvements
Dec 18, 2010
7 years 10 months atusb.brd: several small solderability improvements
7 years 10 months usb.sch: explain how the the ID pin works
7 years 10 months atusb.brd: avoid track leaving pad 16 of U2 laterally, for better solderability
7 years 10 months atusb: firmware update for the 2010-12-16 board series
Dec 16, 2010
7 years 11 months atusb: updated and improved CAM script
7 years 11 months atusb.brd: removed stray pad
7 years 11 months mkmk: further improvements and updates
7 years 11 months atusb/cam2/mkmk: new-style CAM script


interactive