IEEE 802.15.4 subsystem

Sign in or create your account | Project List | Help

IEEE 802.15.4 subsystem Updates

AgeSort asc/descChange
Prev 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 Next
Dec 6, 2010
7 years 11 months ecn/ecn0007.txt: Revised via spacing (for the antenna)
Dec 3, 2010
7 years 11 months atusb: add automatic board revision detection; clean up feed line
7 years 11 months atusb/cam: updated CAM process for new board
7 years 11 months atusb: bumped version number to 20101202
7 years 11 months atusb: move traces to coincide with thermal relief
7 years 11 months atusb/atusb.brd: added ground zones on front layer as well
7 years 11 months atusb: added bottom ground zones (on-going)
Dec 2, 2010
7 years 11 months atusb.brd: more layout work (on-going)
7 years 11 months atusb.brd: new layout (in progress)
7 years 11 months atusb: rearrange I/Os for new layout
7 years 11 months usrp: adjust outlier rejection and signal range for improved antennas
7 years 11 months usrp/fscan: results are now quite stable, so 20 instead of 100 runs are enough
Dec 1, 2010
7 years 11 months atusb: remove two unnecessary test points
7 years 11 months atusb/cam: modernize, and change setup for current workpiece
7 years 11 months atusb: updated footprint assignment
7 years 11 months usrp/range: more useful diagnostic output and harden against underflows
7 years 11 months usrp/doall: usage and allow passing of arguments to evscan as well
7 years 11 months usrp: update filtering and display for uncorrupted measurement setup
7 years 11 months ants/cam: update for latest workpiece
7 years 11 months usrp: try to bring back sanity to pre- and post-processing of FFT data


interactive