IEEE 802.15.4 subsystem

Sign in or create your account | Project List | Help

IEEE 802.15.4 subsystem Updates

AgeSort asc/descChange
Prev 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 Next
Aug 23, 2010
8 years 11 months New circuit: an arbitrary-precision counter.
Aug 22, 2010
8 years 11 months Moved hardware design files from top-level directory to atrf/
8 years 11 months Additions to bookshelf: AT86RF230 programmer's guide and 2.4 GHz regulations.
8 years 11 months Added Makefile to build/install/etc. all the ATSPI utilities.
8 years 11 months atspi-reset: utility to reset transceiver or entire board.
8 years 11 months tools/atspi-rssi/: spectrum scan utility
Aug 21, 2010
8 years 11 months Enter TRX_OFF to enable DVDD regulator. Plus minor cleanup.
8 years 11 months fw/atspi/atspi.c (reset_rf): added reset timing measurement
8 years 11 months Added register definitons and simplified register naming.
8 years 11 months We can now read the transceiver's registers.
Aug 20, 2010
8 years 11 months xxx_MODE were used as if they were port bits, not registers.
8 years 11 months Active-high IRQ_RF was routed to active-low interrupt input
8 years 11 months Introduce library with ATSPI access functions (largely untested)
8 years 11 months Fix typo and make "make dfu" work again.
8 years 11 months Simplified the presentation of build date information and added a
8 years 11 months More config rearranging: USB IDs are now in include/atspi/usb-ids.h, which
8 years 11 months - fw/atspi/Makefile (USB_ID): corrected and updated USB ID extraction
8 years 11 months Implemented AT86RF230 reset and access modes. (Completely untested.)
8 years 11 months Turn the LED on while in the boot loader.
8 years 11 months Generate port, bit, and output mode definitions from io.h


interactive