IEEE 802.15.4 subsystem

Sign in or create your account | Project List | Help

IEEE 802.15.4 subsystem Updates

AgeSort asc/descChange
Prev 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 Next
Dec 2, 2010
8 years 10 months atusb.brd: more layout work (on-going)
Dec 3, 2010
8 years 10 months atusb: added bottom ground zones (on-going)
8 years 10 months atusb/atusb.brd: added ground zones on front layer as well
8 years 10 months atusb: move traces to coincide with thermal relief
8 years 10 months atusb: bumped version number to 20101202
8 years 10 months atusb/cam: updated CAM process for new board
8 years 10 months atusb: add automatic board revision detection; clean up feed line
Dec 6, 2010
8 years 10 months ecn/ecn0007.txt: Revised via spacing (for the antenna)
Dec 16, 2010
8 years 10 months atusb/cam2/mkmk: new-style CAM script
8 years 10 months mkmk: further improvements and updates
8 years 10 months atusb.brd: removed stray pad
8 years 10 months atusb: updated and improved CAM script
Dec 18, 2010
8 years 10 months atusb: firmware update for the 2010-12-16 board series
8 years 10 months atusb.brd: avoid track leaving pad 16 of U2 laterally, for better solderability
8 years 10 months usb.sch: explain how the the ID pin works
8 years 10 months atusb.brd: several small solderability improvements
Dec 20, 2010
8 years 10 months atusb: more small layout improvements
8 years 10 months atusb/cam2/mkmk: compensate deflection when cutting the board outline
8 years 10 months atusb/fw/common/config.h: corrected BOARD_xxx names in #if defined()
Dec 28, 2010
8 years 9 months atusb.brd: saving with the zones filled, to avoid surprises


interactive