Age Message
10 years 1 month Fixing the mask layer on annular rings
10 years 1 month Increase Zone's clearance to .15mm, reduce Mask clearance to .1mm
10 years 2 months replace the old email address of Adam
10 years 2 months Fix some DRC errors on key pads.
10 years 2 months same as last commited contents
10 years 2 months 1, renamed power-tree J1 to J2.

2, changed C26 from Copper layer to Component layer.
3, changed text of "http://sharism.cc/" to "http://nanonote.cc/"
4, generated *.lst to list every part as bom for confiming automatic insertion (AI) attibute.
5, edited and checked each part's attibutes as Normal+Insert for AI need.
6, generated *-Component.pos & *-Copper.pos for AI.
7, generated *-drc.rpt, gerber files & drill file again
10 years 2 months Change board and CC_BY_SA logo to silkscreen layer
10 years 2 months Adding CC and COL_LOGO files
10 years 2 months Adding emQbit/UNAL text, Board logo and CC-BY-SA logo
10 years 2 months 1, generated PCBnew DRC file
10 years 2 months 1, Set the coordinates origin for the photo plot and drill file

2, generated gerber files and drill file
3, renamed text 20100107 to 20100111
10 years 2 months 1. renamed U12 to KB3436 in function_block

2. added MT48LC32M16A2P-75:C in sch
3. renamed 32MB to 64MB in function_block
4. added "http://sharism.cc/""RXD/TXD/GND""+""-" in Silks_Cmp layer
10 years 2 months Fix the errors on: http://wiki.qi-hardware.com/wiki/Layout_notes_avt2_RC2_20091230
10 years 3 months Added touch test points (4-pin connector).
10 years 3 months Serial connector: 8P->3P.
10 years 4 months Changes: see the <layout_note_revised2.txt> file.
10 years 4 months Changes: see the <layout_note_revised2.txt> file.
10 years 4 months See the <layout_note_revised2.txt> file.
10 years 4 months Adding SW1 (small).
10 years 4 months Changing Serial Connector.
10 years 5 months kb3436 for usb host.
10 years 5 months Changin: EMI filter, KEYIN8 and RXD Pull-up.
10 years 5 months Updating Inner_L1 gerber. Complete conecctions board pcb.
10 years 5 months Updating Inner_L1 gerber. Complete conecctions board pcb.
10 years 5 months Added: Fill zones (copper pour), USB-DF IC.

Branches:
master



interactive