C8051F32x firmware infrastructure Updates

AgeSort asc/desc	Change
Prev 1 2 3 4 Next
Oct 22, 2010
12 years 11 months	Include gpio-s3c24xx.h in gpio-s3c24xx.c
Commit df9fb5c33823b945aacd1b2a961d84139a4bd98e, by Werner Almesberger
12 years 11 months	f32x: added support for the c2ben adapter
Commit bb600dada5a12dcc90595167834e4502669dbbdc, by Werner Almesberger
12 years 11 months	Don't call gpio_init in c2_init, so that we can do additional setup work before
Commit 80a015266327b2287f7d417028f24ff36a6114db, by Werner Almesberger
12 years 11 months	Labeled the control signals with the Ben's GPIOs
Commit 4f743578ab542819ab612992b84be445c8ed5d52, by Werner Almesberger
12 years 11 months	Moved C2 bitbang functions from c2-om.c to (#included) c2-bitbang.c
Commit 6a4da0eaefcce12f63a8a7f44fc2d9f546405f26, by Werner Almesberger
Oct 21, 2010
12 years 11 months	Renamed gpio.* to gpio-s3c24xx.*
Commit 3c9abdc65a5b9683c4ec1e1674346bb17ca52d35, by Werner Almesberger
12 years 11 months	Switched from four-spaces to one-tab indentation.
Commit 3bbf31853678e5b9cd9d9496437546c3ea8a06dd, by Werner Almesberger
12 years 11 months	Support different targets. (Openmoko GTA01/02 with Dbgv3, soon c2ben.)
Commit de75051afa1c0c5d1877ceb4a92d4c23b0e868af, by Werner Almesberger
12 years 11 months	Prepare abstraction of C2 communication.
Commit ab35c6b518b0a07aeacda1ca4be91bcdca795089, by Werner Almesberger
12 years 11 months	c2ben/c2ben.brd: changed track width from 8 to 10 mil
Commit 66a929a1f55440b9d076a8f6aa3dffec2b798936, by Werner Almesberger
12 years 11 months	c2ben/: initial commit of passive C2 adapter board for the Ben's uSD slot.
Commit c1935d59d0b89e5c9759e64f1e2ecdfe0935eb81, by Werner Almesberger
Oct 20, 2010
12 years 11 months	Removed local copy of pads.fpd from c2usb
Commit 7829d4d56922aa16a00e90ac8dbb3e89487ba320, by Werner Almesberger
12 years 11 months	c2usb/c2usb.sch: mark design as suspended, due to FT232 being unfit for project
Commit 07e96675f64a822ea5662c79ece2dee205c80325, by Werner Almesberger
12 years 11 months	Renamed hw/ to c2usb/, to make room for other hardware.
Commit 8eaef6b0624a973b28125040a11464a6d70fe098, by Werner Almesberger
Oct 8, 2010
12 years 11 months	fw/c2usb.conf: USB product ID assignment is now official
Commit 77d684804c54d67ea285d97394c184cd0d09435e, by Werner Almesberger
12 years 11 months	Added BOOKSELF and dsv setup procedure.
Commit 3fd1720e8f441c342fb1f87f4cd43b203cd9474b, by Werner Almesberger
12 years 11 months	Customize the FT232 EEPROM with the Qi Hardware ID and other parameters.
Commit 9777d88d5a325c96c566f0ecc471d35752562ab1, by Werner Almesberger
12 years 11 months	hw/cam/: toolpath generation for cutting the PCB.
Commit c9f4c9b3db440199abda635eb3765eaa8cb9320e, by Werner Almesberger
12 years 11 months	R1/R2 were very close to U1 - move them away. Some small cleanup.
Commit 807616f24b27eaca90c1c7d458563169ea43def3, by Werner Almesberger
Oct 4, 2010
12 years 11 months	Make the board a bit bigger for more relaxed spacing of traces and components.
Commit c7a53e87366b13dd81121ee406086541034272bd, by Werner Almesberger

C8051F32x firmware infrastructure

interactive