Root/
| 1 | .TH FPED: "1" "March 2016" |
| 2 | .SH NAME |
| 3 | fped \- Footprint editor |
| 4 | .SH SYNOPSIS |
| 5 | .TP |
| 6 | .B fped |
| 7 | [\-1 package] [\-g] [\-k] [\-l] |
| 8 | [\-p|\-P [\-K] [\-m] [\-s scale]] |
| 9 | [\-T [\-T]] [cpp_option ...] [in_file [out_file]] |
| 10 | |
| 11 | .SH DESCRIPTION |
| 12 | .B fped |
| 13 | is an editor that allows the interactive creation of footprints of |
| 14 | electronic components. Footprint definitions are stored in a text format |
| 15 | that resembles a programming language. |
| 16 | The language is constrained such that anything that can be expressed in |
| 17 | the textual definition also has a straightforward equivalent operation |
| 18 | that can be performed through the GUI. |
| 19 | A description of the GUI can be found here: |
| 20 | http://downloads.qi-hardware.com/people/werner/fped/gui.html |
| 21 | .SH OPTIONS |
| 22 | .TP |
| 23 | \fB\-1\fR package |
| 24 | output only the specified package |
| 25 | .TP |
| 26 | \fB\-g\fR |
| 27 | write gnuplot output, then exit |
| 28 | .TP |
| 29 | \fB\-k\fR |
| 30 | write KiCad output, then exit |
| 31 | .TP |
| 32 | \fB\-l\fR |
| 33 | list package names, then exit |
| 34 | .TP |
| 35 | \fB\-K\fR |
| 36 | show the pad type key (for \fB\-P\fR) |
| 37 | .TP |
| 38 | \fB\-m\fR |
| 39 | do not show measurements |
| 40 | .TP |
| 41 | \fB\-p\fR |
| 42 | write Postscript output, then exit |
| 43 | .TP |
| 44 | \fB\-P\fR |
| 45 | write Postscript output (full page), then exit |
| 46 | .TP |
| 47 | \fB\-s\fR scale |
| 48 | scale factor for \fB\-P\fR (default: auto\-scale) |
| 49 | .br |
| 50 | Instead of a scale factor, the maximum width and/or height (in millimeters) |
| 51 | can be specified: [width]\fBx\fR[height] |
| 52 | .TP |
| 53 | \fB\-T\fR |
| 54 | test mode. Load file, then exit |
| 55 | .TP |
| 56 | \fB\-T\fR \fB\-T\fR |
| 57 | test mode. Load file, dump to stdout, then exit |
| 58 | .TP |
| 59 | cpp_option |
| 60 | \fB\-Idir\fR, \fB\-Dname\fR[=\fIvalue\fR], or \fB\-Uname\fR |
| 61 | .PP |
| 62 | Please report any further bugs to |
| 63 | .B werner@almesberger.net |
| 64 | .SH LICENCE |
| 65 | .B fped |
| 66 | is covered by the GNU General Public License (GPL), version 2 or later. |
| 67 | .SH AUTHORS |
| 68 | Werner Almesberger <werner@almesberger.net> |
| 69 | .PP |
| 70 | This manual page was written by Xiangfu Liu <xiangfu.z@gmail.com> |
| 71 | It is licensed under the terms of the GNU GPL (version 2 or later). |
| 72 |
Branches:
master
