Root/modules/INFO

Source at commit c2feac59f7742473fefcba3349aad7491f4aef54 created 7 years 9 months ago.
By Werner Almesberger, modules/meander-2.4GHz.fpd: 2.4 GHz PCB antenna
1#
2# Tags:
3#
4# F Footprint name (must be first)
5# N Data sheet identifier (N tag of BOOKSHELF; can be omitted if equal to F)
6#
7
8# Printed 8:10 card contacs
9F: 8_10-card
10
11# Open clip for AA batteries, through-hole
12# http://www.memoryprotectiondevices.com/datasheets/BK-92-datasheet.pdf
13# Note: should generalize this for AAA and maybe also larger sizes
14F: bat-clip-aa-th
15
16# BGA
17F: bga
18# - 484-Pin FineLine BGA(FBGA), from Altera
19# http://www.altera.com/devicepackaging/04R00416-02.pdf
20#
21# - FG(G)484 Fine-Pitch BGA, from Xilinx
22# http://www.xilinx.com/support/documentation/user_guides/ug385.pdf
23#
24
25# Chip SMD Aluminum Electrolytic Capacitors
26F: c-smd
27#
28# for example 10TZV220M6.3X8 from RUBYCON
29#
30# - c-smd-5mmx6.1mm, c-smd-6.3mmx8mm, c-smd-8mmx10.5mm, c-smd-10mmx10.5mm
31#
32# package drawing
33# http://www.rubycon.co.jp/en/catalog/e_pdfs/aluminum/e_TZV.pdf
34#
35# land pattern
36# http://www.rubycon.co.jp/en/catalog/e_pdfs/aluminum/Chip_Alumi_Eng.pdf
37#
38
39# Chip SMD Tantalum Capacitors
40F: c-t-smd
41#
42# for example T520B157M006ATE070 from KEMET
43#
44# - TC-$Case-$EIA-$Density
45# the density is based on the conditions outlined in IPC standard 7351 (IPC-7351).
46#
47# package drawing ( page 62 ), land pattern ( page 73 )
48# http://www.kemet.com/kemet/web/homepage/kechome.nsf/vapubfiles/KEM_TC102_LOWESR.pdf/$file/KEM_TC102_LOWESR.pdf
49#
50
51# DO-214
52F: do-214
53#
54# - DO-214AA(SMB), from Fairchild, for example its 2N7002MTF uses it
55# http://www.fairchildsemi.com/dwg/DO/DO214AA.pdf
56#
57# - DO-214AB(SMC), from Fairchild
58# http://www.fairchildsemi.com/dwg/DO/DO214AB.pdf
59#
60# - DO-214AC(SMA), from Fairchild
61# http://www.fairchildsemi.com/dwg/DO/DO214AC.pdf
62#
63
64# EUS (R-PDSS-T6)
65F: eus
66#
67# - for example: the PTH04000WAH data sheet, it's EUS
68# http://www.ti.com/lit/ds/symlink/pth04000w.pdf
69#
70
71# Fiducial (1 mm copper pad, 2 mm solder mask clearance)
72F: fiducial
73
74# Header with outline for shrouded wafer for example, SMD type
75F: he-shrouded
76#
77# - ${n}x2pins-${pitch}: for example Molex: the 87832-1420 data sheet, package drawing
78# http://www.molex.com/pdm_docs/sd/878321420_sd.pdf
79#
80
81# IR Receiver Module
82F: ir
83#
84# From Vishay:
85#
86# - the TSOP322.., TSOP324.., TSOP348.., TSOP344.. data sheet
87# http://www.vishay.com/docs/81732/tsop348.pdf
88
89# LED right angle package
90F: ledsmd
91#
92# - LEDSMD-0603R: for example: the APA1606SURCK data sheet, package drawing
93# http://www.us.kingbright.com/images/catalog/SPEC/APA1606SURCK.pdf
94# added a letter 'R' stands for right angle land pattern
95# could expand it as else land pattern for 0603, 0805, 0805R, etc.
96#
97
98# MDIP
99F: mdip
100#
101# From FAIRCHILD:
102#
103# - the 6N138S data sheet
104# http://www.fairchildsemi.com/ds/6N/6N138.pdf
105#
106# Package Type:
107#
108# - MDIP 8L
109# http://www.fairchildsemi.com/package/packageDetails.html?id=PN_192-B08
110#
111# Package Drawing:
112#
113# http://www.fairchildsemi.com/dwg/N0/N08H.pdf
114
115# Mini-USB B receptable (SMT; almost generic)
116F: mini_usb_b
117
118# Solder pads and test points
119F: pads
120
121# "pads" in typical array formations
122F: pads-array
123
124# "Generic" simple QFN
125F: qfn
126#
127# The information for these packages comes from various sources:
128#
129# - the C8051F326 data sheet, for the QFN28 footprint (N: mcu)
130# - the AT86F326 data sheet, for the QFN32 package dimensions (N: txrx)
131# - Atmel's general recommendations for QFN land patterns (N: atmel-qfn)
132# - NXP's SOT617-1 and SOT617-3, for package and land pattern:
133# http://www.nxp.com/package/SOT617-1.html
134# http://www.nxp.com/package/SOT617-3.html
135#
136# Solder paste:
137#
138# Footprint Center pad Closest NXP (with complete land pattern)
139# QFN28-Atmel 2.4 mm for further study
140# QFN28-SiLabs 3.3 mm use SiLab's specification
141# QFN32-VHHD-2 3.7 mm between SOT818-1 and SOT788-1
142# QFN32-VHHD-6 3.4 mm SOT818-1
143#
144# From NXP:
145#
146# Package Pad Paste zone Islands Isl. size Isl. gap
147# SiLabs 3.25 3.1 3 x 3 0.9
148# SOT818-1 3.4 1.75 2 x 2 0.75 0.25
149# SOT788-1 4.0 2.4 3 x 3 0.6 0.3
150#
151# NXP rules (AN10365):
152# - paste zone = 35% of pad area
153# - paste coverge = 20% of pad area
154#
155# Our parameters:
156#
157# Package Pad Paste zone Islands Isl. size Isl. gap Zone Coverage
158# QFN32-VHHD-2 3.7 2.15 3 x 3 0.55 0.25 34% 20%
159# QFN32-VHHD-6 3.4 1.95 2 x 2 0.75 0.45 33% 19%
160#
161# Known bugs:
162#
163# - really ought to merge all the various QFN definitions (we have more
164# over at gta02-core) into a single QFN file with a big mean table of
165# everything
166#
167N: sot617-3-lp
168
169# "Generic" simple QFP (for now, just for Silabs' C8051F320)
170F: qfp
171#
172# - the C8051F320 data sheet
173# http://www.silabs.com/Support%20Documents/TechnicalDocs/C8051F32x.pdf
174#
175# according to MAXIM web: http://www.maxim-ic.com/design/packaging/
176# the LQPF48/TQFP48 referred to the same package drawing and land pattern
177#
178# - LQFP48, TQFP48: C48 -> package drawing
179# http://pdfserv.maxim-ic.com/package_dwgs/21-0054.PDF
180#
181# - LQFP48, TQFP48: C48 -> package land pattern
182# http://pdfserv.maxim-ic.com/land_patterns/90-0093.PDF
183#
184# - LQFP64, JEDEC MS-026-BCD for example: the ADV7181CBSTZ data sheet, package drawing
185# http://www.analog.com/static/imported-files/data_sheets/ADV7181C.pdf
186#
187# - LQFP64, C64 -> package drawing
188# http://pdfserv.maxim-ic.com/package_dwgs/21-0083.PDF
189#
190# - LQFP64, C64 -> package land pattern
191# http://pdfserv.maxim-ic.com/land_patterns/90-0141.PDF
192#
193
194# 3.5mm audio stereo phone jack
195F: phonejack
196#
197# phonejack-${size}-${N}
198# From SCPRE:
199#
200# - phonejack-3.5-5, the SCJ368R1NUS0B00G data sheet, drawing
201# http://downloads.qi-hardware.com/hardware/milkymist_one/datasheet/Audio/SCJ368R1NUS0B00G.pdf
202#
203
204# RJ45, 8 pins, two leds
205F: rj45
206#
207# - RJ45-8-LED, the 48025-0002 data sheet, drawing, from MOLEX
208# http://www.molex.com/pdm_docs/sd/480250002_sd.pdf
209#
210
211# SOIC
212F: soic
213#
214# From TI:
215#
216# - the SN75HVD12DR data sheet
217# http://www.ti.com/lit/ds/symlink/sn75hvd12.pdf
218#
219# Package Drawing:
220#
221# - D(JEDEC)
222# - R-PDSO-G8
223# http://www-s.ti.com/sc/psheets/msoi002j/msoi002j.pdf
224# - R-PDSO-G14
225# http://www-s.ti.com/sc/psheets/mpds177g/mpds177g.pdf
226# - R-PDSO-G16
227# http://www-s.ti.com/sc/psheets/mpds178g/mpds178g.pdf
228
229# SOT generic package
230F: sot
231# experimental generic SOT footprint; currently only for
232#
233# - SOT-323 aka SC-70
234# http://www.onsemi.com/pub_link/Collateral/BAV99WT1-D.PDF
235# - SOT-363 aka SC-88 aka SC-70-6
236# http://www.onsemi.com/pub_link/Collateral/MBT3946DW1T1-D.PDF
237# - SOT-523
238# http://www.diodes.com/datasheets/ds31784.pdf
239# - SOT-563
240# http://www.onsemi.com/pub_link/Collateral/NTZD3155C-D.PDF
241#
242# some conflicts with the outline exist
243
244# SOT23 generic package with counter-clockweise or clockwise pin assignment
245F: sot23
246#
247# - SOT23: aka JEDEC TO-236 for example, the APX803-40SAG-7 data sheet, package drawing and land pattern
248# http://www.diodes.com/datasheets/APX803.pdf
249#
250# for another example from Fairchildsemi 2N7002MTF, package drawing and land pattern
251# http://www.fairchildsemi.com/dwg/MA/MA03D.pdf
252#
253
254# Standard rectangular passive components
255F: stdpass
256#
257# packages: 0201, 0402, 0603, 0805, 1206, 1210, 1812, 2010, 2512
258# polarized(marked the cathode) packages: starts from 0603P to 2512P
259#
260# be noticed that 1812 land pattern based on a p/n: miniSMDC200F from Tycoelectronics
261# http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Catalog+Section%7FSURFACE-MOUNT%7FA1%7Fpdf%7FEnglish%7FENG_CS_SURFACE-MOUNT_A1.pdf%7FRF1410-000
262#
263
264# SOT-323 package with counter-clockweise or clockwise pin assignment
265F: sot-323
266N: mmst3904
267
268# http://www.nxp.com/#/page/content=[f=/packages/SOT341-1.xml]
269# http://www.nxp.com/packages/SOT341-1.html
270# http://www.nxp.com/documents/reflow_soldering/SSOP-TSSOP-VSO-REFLOW.pdf
271
272# "Generic" simple SSOP
273F: ssop
274#
275# - TSSOP14: for example: the MIC2550AYTS data sheet, package drawing
276# http://www.micrel.com/_PDF/mic2550a.pdf
277#
278# - TSSOP14: from NXP -> package land pattern
279# http://www.nxp.com/packages/SOT402-1.html
280# http://www.nxp.com/documents/reflow_soldering/sot402-1_fr.pdf
281
282# "Generic" simple TO-252, TO-263
283F: to
284#
285# - TO-252 for example: the LP38690DT-3.3 data sheet, it's TO-252
286# http://www.ti.com/lit/ds/symlink/lp38690.pdf
287#
288# - JEDEC Spec: TO-252 AA -> package drawing and land pattern
289# http://www.national.com/packaging/mkt/td03b.pdf
290#
291# - TO-263 for example: the LP38511TJ-ADJ/NOPB data sheet, it's TO-263
292# http://www.ti.com/lit/ds/symlink/lp38511-adj.pdf
293#
294# - JEDEC Spec: TO-263 THIN -> package drawing and land pattern
295# http://www.national.com/packaging/mkt/tj5a.pdf
296#
297
298# "Generic" simple TSOP
299F: tsop
300#
301# - TSOP28: Z28 -> package drawing
302# http://pdfserv.maxim-ic.com/package_dwgs/21-0273.PDF
303#
304# - TSOP28: Z28 -> package land pattern
305# http://pdfserv.maxim-ic.com/land_patterns/90-0319.PDF
306#
307# according to MAXIM web: http://www.maxim-ic.com/design/packaging/
308# the TSOP32 referred to the same package drawing and land pattern
309#
310# - TSOP32: Z32 -> package drawing
311# http://pdfserv.maxim-ic.com/package_dwgs/21-0274.PDF
312#
313# - TSOP32: Z32 -> package land pattern
314# http://pdfserv.maxim-ic.com/land_patterns/90-0320.PDF
315#
316# - TSOP56: the JS28F256J3F105 data sheet, it's TSOP-56
317# http://www.micron.com/parts/nor-flash/parallel-nor-flash/~/media/Documents/Products/Data%20Sheet/NOR%20Flash/6062319942_J3_65_256M_MLC_DS.ashx
318#
319# - TSOP66: for example: the MT46V32M16P-5B:F data sheet, it's 400 mil, package drawing
320# http://download.micron.com/pdf/datasheets/dram/ddr/512MBDDRx4x8x16.pdf
321#
322# - TSOP66: currently referred to M1rc3 design files land pattern:
323# width of pad -> 0.4 mm, it's rectangle not round one
324# length of pad -> 1.25 mm
325# Width of body -> 400 mil
326
327# TSSOP5 for NXP
328F: tssop5
329#
330# - TSSOP5 aka for example package drawing SOT353-1 from NXP 74AUP1G08GW data sheet,
331# http://www.nxp.com/documents/data_sheet/74AUP1G08.pdf
332# http://www.nxp.com/packages/SOT353-1.html
333# but without real land pattern found, still could refer link below for more in details:
334# http://www.nxp.com/documents/application_note/AN10365.pdf
335#
336# also check OnSemi's MC74VHC1G135-D http://www.onsemi.cn/pub_link/Collateral/MC74VHC1G135-D.PDF for SOT-353
337# they both TSSOP5(NXP) and SOT-353(OnSemi) are quite similar. OnSemi has land pattern for it.
338#
339# NXP's Lp is 0.46 mm in max., OnSemi's K is 0.3 mm max. with a land pattern of pad length 0.5 mm.
340# could use a land pattern of pad length to be 0.7 mm.
341#
342
343# USB A plug for SMT
344#
345# Note: the signal pads are enlarged by 0.2 mm and their center is shifted by
346# 0.1 mm with respect to the reference.
347#
348# According to the data sheet, the leads terminate at (2.00+/-0.10 mm)/2+
349# 2.48 mm = 3.48+/-0.10 mm from the center. The reference footprint puts the
350# edge of the pads at (2.00+/-0.10 mm)/2+2.6 mm = 3.6 mm+/-0.10 mm, so the
351# maximum lead end could be at 3.58 mm while the minimum pad edge could be at
352# 3.5 mm.
353#
354# Assuming that the pad is intended to extend a bit beyond the lead, we need
355# to add 0.2 mm to compensate for these tolerances. (The pad tolerance may not
356# be intended to be used this way, however, we still have to consider small
357# errors in registration, which also amount to about 0.1 mm, so the calculation
358# remains valid.)
359#
360F: usb_a_plug_smt
361
362# USB 2.0 from usb_20_040908, page 99
363F: usb-a-pcb
364
365# 2-pins rectangular smd xtal
366F: xtal-2
367#
368# - xtal2-11.5mmx4.83mm package drawing, land pattern
369# for example R49SSA-028636-F20-YYY-YQA
370# http://downloads.qi-hardware.com/hardware/milkymist_one/datasheet/VideoIn/Qi%20R49SSA-028636-F20-YYY-YQA.pdf
371#
372
373# 4-pins rectangular smd xtal
374F: xtal-4
375#
376# - xtal4-3.2mmx2.5mm package drawing, land pattern
377# for example NX3225SA
378# http://www.ndk.com/images/products/catalog/c_NX3225SA-STD-CSQ-1_e.pdf
379#
380# - xtal4-5mmx3.2mm package drawing, land pattern
381# for example SO5032-050000-O3A-BBE-QA
382# http://downloads.qi-hardware.com/hardware/milkymist_one/datasheet/FPGA/Qi%20Hardware%20SO5032-050000-O3A-BBE-QA.pdf
383#
384# - xtal4-6mmx3.6mm package drawing, land pattern
385# for example ABMM2-24.576MHZ-E2-T
386# http://www.abracon.com/Resonators/ABMM2.pdf
387#
388
389# Small Size 2.4 GHz PCB Antenna
390# http://focus.ti.com/lit/an/swra117d/swra117d.pdf
391F: meander-2.4GHz
392

Archive Download this file

Branches:
master



interactive