Root/target/linux/ifxmips/files-2.6.33/arch/mips/pci/pci-ifxmips.c

1#include <linux/types.h>
2#include <linux/pci.h>
3#include <linux/kernel.h>
4#include <linux/init.h>
5#include <linux/delay.h>
6#include <linux/mm.h>
7#include <asm/addrspace.h>
8#include <linux/vmalloc.h>
9#include <ifxmips.h>
10#include <ifxmips_irq.h>
11#include <ifxmips_cgu.h>
12
13#define IFXMIPS_PCI_MEM_BASE 0x18000000
14#define IFXMIPS_PCI_MEM_SIZE 0x02000000
15#define IFXMIPS_PCI_IO_BASE 0x1AE00000
16#define IFXMIPS_PCI_IO_SIZE 0x00200000
17
18extern int ifxmips_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
19extern int ifxmips_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
20
21struct pci_ops ifxmips_pci_ops =
22{
23    .read = ifxmips_pci_read_config_dword,
24    .write = ifxmips_pci_write_config_dword
25};
26
27static struct resource pci_io_resource =
28{
29    .name = "io pci IO space",
30    .start = IFXMIPS_PCI_IO_BASE,
31    .end = IFXMIPS_PCI_IO_BASE + IFXMIPS_PCI_IO_SIZE - 1,
32    .flags = IORESOURCE_IO
33};
34
35static struct resource pci_mem_resource =
36{
37    .name = "ext pci memory space",
38    .start = IFXMIPS_PCI_MEM_BASE,
39    .end = IFXMIPS_PCI_MEM_BASE + IFXMIPS_PCI_MEM_SIZE - 1,
40    .flags = IORESOURCE_MEM
41};
42
43static struct pci_controller ifxmips_pci_controller =
44{
45    .pci_ops = &ifxmips_pci_ops,
46    .mem_resource = &pci_mem_resource,
47    .mem_offset = 0x00000000UL,
48    .io_resource = &pci_io_resource,
49    .io_offset = 0x00000000UL,
50};
51
52/* the cpu can can generate the 33Mhz or rely on an external clock the cgu needs the
53   proper setting, otherwise the cpu hangs. we have no way of runtime detecting this */
54u32 ifxmips_pci_mapped_cfg;
55int ifxmips_pci_external_clock = 0;
56
57/* Since the PCI REQ pins can be reused for other functionality, make it possible
58   to exclude those from interpretation by the PCI controller */
59int ifxmips_pci_req_mask = 0xf;
60
61static int __init
62ifxmips_pci_set_external_clk(char *str)
63{
64    printk("cgu: setting up external pci clock\n");
65    ifxmips_pci_external_clock = 1;
66    return 1;
67}
68__setup("pci_external_clk", ifxmips_pci_set_external_clk);
69
70int
71pcibios_plat_dev_init(struct pci_dev *dev)
72{
73    u8 pin;
74
75    pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
76    switch(pin)
77    {
78        case 0:
79            break;
80        case 1:
81            //falling edge level triggered:0x4, low level:0xc, rising edge:0x2
82            ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_CON) | 0xc, IFXMIPS_EBU_PCC_CON);
83            ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_IEN) | 0x10, IFXMIPS_EBU_PCC_IEN);
84            break;
85        case 2:
86        case 3:
87        case 4:
88            printk ("WARNING: interrupt pin %d not supported yet!\n", pin);
89        default:
90            printk ("WARNING: invalid interrupt pin %d\n", pin);
91            return 1;
92    }
93    return 0;
94}
95
96static u32 calc_bar11mask(void)
97{
98    u32 mem, bar11mask;
99
100    /* BAR11MASK value depends on available memory on system. */
101    mem = num_physpages * PAGE_SIZE;
102    bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) -1)) -1)) | 8;
103
104    return bar11mask;
105}
106
107static void __init
108ifxmips_pci_startup(void)
109{
110    u32 temp_buffer;
111
112    cgu_setup_pci_clk(ifxmips_pci_external_clock);
113
114    ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT);
115    ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OD) | (1 << 5), IFXMIPS_GPIO_P1_OD);
116    ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | (1 << 5), IFXMIPS_GPIO_P1_DIR);
117    ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL1);
118    ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL0);
119    ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) & ~0x2000, IFXMIPS_GPIO_P1_DIR);
120    ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | 0x4000, IFXMIPS_GPIO_P1_DIR);
121    ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~0x6000, IFXMIPS_GPIO_P1_ALTSEL1);
122    ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) | 0x6000, IFXMIPS_GPIO_P1_ALTSEL0);
123    /* enable auto-switching between PCI and EBU */
124    ifxmips_w32(0xa, PCI_CR_CLK_CTRL);
125    /* busy, i.e. configuration is not done, PCI access has to be retried */
126    ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
127    wmb ();
128    /* BUS Master/IO/MEM access */
129    ifxmips_w32(ifxmips_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
130
131    /* enable external 2 PCI masters */
132    temp_buffer = ifxmips_r32(PCI_CR_PC_ARB);
133    temp_buffer &= (~(ifxmips_pci_req_mask << 16));
134    /* enable internal arbiter */
135    temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
136    /* enable internal PCI master reqest */
137    temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
138
139    /* enable EBU reqest */
140    temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
141
142    /* enable all external masters request */
143    temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
144    ifxmips_w32(temp_buffer, PCI_CR_PC_ARB);
145    wmb ();
146
147    ifxmips_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
148    ifxmips_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
149    ifxmips_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
150    ifxmips_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
151    ifxmips_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
152    ifxmips_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
153    ifxmips_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
154    ifxmips_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
155    ifxmips_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
156    ifxmips_w32(calc_bar11mask(), PCI_CR_BAR11MASK);
157    ifxmips_w32(0, PCI_CR_PCI_ADDR_MAP11);
158    ifxmips_w32(0, PCI_CS_BASE_ADDR1);
159#ifdef CONFIG_SWAP_IO_SPACE
160    /* both TX and RX endian swap are enabled */
161    ifxmips_w32(ifxmips_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
162    wmb ();
163#endif
164    /*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
165    ifxmips_w32(ifxmips_r32(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK);
166    ifxmips_w32(ifxmips_r32(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK);
167    /*use 8 dw burst length */
168    ifxmips_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
169    ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
170    wmb();
171    ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) & ~(1 << 5), IFXMIPS_GPIO_P1_OUT);
172    wmb();
173    mdelay(1);
174    ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT);
175}
176
177int __init
178pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){
179    switch(slot)
180    {
181        case 13:
182            /* IDSEL = AD29 --> USB Host Controller */
183            return (INT_NUM_IM1_IRL0 + 17);
184        case 14:
185            /* IDSEL = AD30 --> mini PCI connector */
186            return (INT_NUM_IM0_IRL0 + 22);
187        default:
188            printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
189            return 0;
190    }
191}
192
193int __init
194pcibios_init(void)
195{
196    extern int pci_probe_only;
197
198    pci_probe_only = 0;
199    printk("PCI: Probing PCI hardware on host bus 0.\n");
200    ifxmips_pci_startup ();
201    ifxmips_pci_mapped_cfg = (u32)ioremap_nocache(0x17000000, 0x800 * 16);
202    printk("IFXMips PCI mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_mapped_cfg);
203    ifxmips_pci_controller.io_map_base = (unsigned long)ioremap(IFXMIPS_PCI_IO_BASE, IFXMIPS_PCI_IO_SIZE - 1);
204    printk("IFXMips PCI I/O mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_controller.io_map_base);
205    register_pci_controller(&ifxmips_pci_controller);
206    return 0;
207}
208
209arch_initcall(pcibios_init);
210

Archive Download this file

Branches:
backfire
history
master
release_2010-11-17
release_2010-12-14
release_2011-02-23
release_2011-05-28
release_2011-08-27
release_2011-11-13
release_2012-03-18
release_2012-04-09
release_2012-10-11
uclibc_nptl



interactive