Root/target/linux/ixp4xx/patches-2.6.33/190-cambria_support.patch

1--- /dev/null
2+++ b/arch/arm/mach-ixp4xx/cambria-pci.c
3@@ -0,0 +1,74 @@
4+/*
5+ * arch/arch/mach-ixp4xx/cambria-pci.c
6+ *
7+ * PCI setup routines for Gateworks Cambria series
8+ *
9+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
10+ *
11+ * based on coyote-pci.c:
12+ * Copyright (C) 2002 Jungo Software Technologies.
13+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
14+ *
15+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
16+ *
17+ * This program is free software; you can redistribute it and/or modify
18+ * it under the terms of the GNU General Public License version 2 as
19+ * published by the Free Software Foundation.
20+ *
21+ */
22+
23+#include <linux/kernel.h>
24+#include <linux/pci.h>
25+#include <linux/init.h>
26+#include <linux/irq.h>
27+
28+#include <asm/mach-types.h>
29+#include <mach/hardware.h>
30+#include <asm/irq.h>
31+
32+#include <asm/mach/pci.h>
33+
34+extern void ixp4xx_pci_preinit(void);
35+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
36+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
37+
38+void __init cambria_pci_preinit(void)
39+{
40+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
41+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
42+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
43+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
44+
45+ ixp4xx_pci_preinit();
46+}
47+
48+static int __init cambria_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
49+{
50+ if (slot == 1)
51+ return IRQ_IXP4XX_GPIO11;
52+ else if (slot == 2)
53+ return IRQ_IXP4XX_GPIO10;
54+ else if (slot == 3)
55+ return IRQ_IXP4XX_GPIO9;
56+ else if (slot == 4)
57+ return IRQ_IXP4XX_GPIO8;
58+ else return -1;
59+}
60+
61+struct hw_pci cambria_pci __initdata = {
62+ .nr_controllers = 1,
63+ .preinit = cambria_pci_preinit,
64+ .swizzle = pci_std_swizzle,
65+ .setup = ixp4xx_setup,
66+ .scan = ixp4xx_scan_bus,
67+ .map_irq = cambria_map_irq,
68+};
69+
70+int __init cambria_pci_init(void)
71+{
72+ if (machine_is_cambria())
73+ pci_common_init(&cambria_pci);
74+ return 0;
75+}
76+
77+subsys_initcall(cambria_pci_init);
78--- /dev/null
79+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
80@@ -0,0 +1,429 @@
81+/*
82+ * arch/arm/mach-ixp4xx/cambria-setup.c
83+ *
84+ * Board setup for the Gateworks Cambria series
85+ *
86+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
87+ *
88+ * based on coyote-setup.c:
89+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
90+ *
91+ * Author: Imre Kaloz <kaloz@openwrt.org>
92+ */
93+
94+#include <linux/device.h>
95+#include <linux/i2c.h>
96+#include <linux/i2c-gpio.h>
97+#include <linux/i2c/at24.h>
98+#include <linux/if_ether.h>
99+#include <linux/init.h>
100+#include <linux/kernel.h>
101+#include <linux/leds.h>
102+#include <linux/memory.h>
103+#include <linux/netdevice.h>
104+#include <linux/serial.h>
105+#include <linux/serial_8250.h>
106+#include <linux/slab.h>
107+#include <linux/socket.h>
108+#include <linux/types.h>
109+#include <linux/tty.h>
110+
111+#include <mach/hardware.h>
112+#include <asm/irq.h>
113+#include <asm/mach-types.h>
114+#include <asm/mach/arch.h>
115+#include <asm/mach/flash.h>
116+#include <asm/setup.h>
117+
118+struct cambria_board_info {
119+ unsigned char *model;
120+ void (*setup)(void);
121+};
122+
123+static struct cambria_board_info *cambria_info __initdata;
124+
125+static struct flash_platform_data cambria_flash_data = {
126+ .map_name = "cfi_probe",
127+ .width = 2,
128+};
129+
130+static struct resource cambria_flash_resource = {
131+ .flags = IORESOURCE_MEM,
132+};
133+
134+static struct platform_device cambria_flash = {
135+ .name = "IXP4XX-Flash",
136+ .id = 0,
137+ .dev = {
138+ .platform_data = &cambria_flash_data,
139+ },
140+ .num_resources = 1,
141+ .resource = &cambria_flash_resource,
142+};
143+
144+static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
145+ .sda_pin = 7,
146+ .scl_pin = 6,
147+};
148+
149+static struct platform_device cambria_i2c_gpio = {
150+ .name = "i2c-gpio",
151+ .id = 0,
152+ .dev = {
153+ .platform_data = &cambria_i2c_gpio_data,
154+ },
155+};
156+
157+static struct eth_plat_info cambria_npec_data = {
158+ .phy = 1,
159+ .rxq = 4,
160+ .txreadyq = 21,
161+};
162+
163+static struct eth_plat_info cambria_npea_data = {
164+ .phy = 2,
165+ .rxq = 2,
166+ .txreadyq = 19,
167+};
168+
169+static struct platform_device cambria_npec_device = {
170+ .name = "ixp4xx_eth",
171+ .id = IXP4XX_ETH_NPEC,
172+ .dev.platform_data = &cambria_npec_data,
173+};
174+
175+static struct platform_device cambria_npea_device = {
176+ .name = "ixp4xx_eth",
177+ .id = IXP4XX_ETH_NPEA,
178+ .dev.platform_data = &cambria_npea_data,
179+};
180+
181+static struct resource cambria_uart_resource = {
182+ .start = IXP4XX_UART1_BASE_PHYS,
183+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
184+ .flags = IORESOURCE_MEM,
185+};
186+
187+static struct plat_serial8250_port cambria_uart_data[] = {
188+ {
189+ .mapbase = IXP4XX_UART1_BASE_PHYS,
190+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
191+ .irq = IRQ_IXP4XX_UART1,
192+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
193+ .iotype = UPIO_MEM,
194+ .regshift = 2,
195+ .uartclk = IXP4XX_UART_XTAL,
196+ },
197+ { },
198+};
199+
200+static struct platform_device cambria_uart = {
201+ .name = "serial8250",
202+ .id = PLAT8250_DEV_PLATFORM,
203+ .dev = {
204+ .platform_data = cambria_uart_data,
205+ },
206+ .num_resources = 1,
207+ .resource = &cambria_uart_resource,
208+};
209+
210+static struct resource cambria_pata_resources[] = {
211+ {
212+ .flags = IORESOURCE_MEM
213+ },
214+ {
215+ .flags = IORESOURCE_MEM,
216+ },
217+ {
218+ .name = "intrq",
219+ .start = IRQ_IXP4XX_GPIO12,
220+ .end = IRQ_IXP4XX_GPIO12,
221+ .flags = IORESOURCE_IRQ,
222+ },
223+};
224+
225+static struct ixp4xx_pata_data cambria_pata_data = {
226+ .cs0_bits = 0xbfff3c03,
227+ .cs1_bits = 0xbfff3c03,
228+};
229+
230+static struct platform_device cambria_pata = {
231+ .name = "pata_ixp4xx_cf",
232+ .id = 0,
233+ .dev.platform_data = &cambria_pata_data,
234+ .num_resources = ARRAY_SIZE(cambria_pata_resources),
235+ .resource = cambria_pata_resources,
236+};
237+
238+static struct gpio_led cambria_gpio_leds[] = {
239+ {
240+ .name = "user", /* green led */
241+ .gpio = 5,
242+ .active_low = 1,
243+ }
244+};
245+
246+static struct gpio_led_platform_data cambria_gpio_leds_data = {
247+ .num_leds = 1,
248+ .leds = cambria_gpio_leds,
249+};
250+
251+static struct platform_device cambria_gpio_leds_device = {
252+ .name = "leds-gpio",
253+ .id = -1,
254+ .dev.platform_data = &cambria_gpio_leds_data,
255+};
256+
257+static struct latch_led cambria_latch_leds[] = {
258+ {
259+ .name = "ledA", /* green led */
260+ .bit = 0,
261+ },
262+ {
263+ .name = "ledB", /* green led */
264+ .bit = 1,
265+ },
266+ {
267+ .name = "ledC", /* green led */
268+ .bit = 2,
269+ },
270+ {
271+ .name = "ledD", /* green led */
272+ .bit = 3,
273+ },
274+ {
275+ .name = "ledE", /* green led */
276+ .bit = 4,
277+ },
278+ {
279+ .name = "ledF", /* green led */
280+ .bit = 5,
281+ },
282+ {
283+ .name = "ledG", /* green led */
284+ .bit = 6,
285+ },
286+ {
287+ .name = "ledH", /* green led */
288+ .bit = 7,
289+ }
290+};
291+
292+static struct latch_led_platform_data cambria_latch_leds_data = {
293+ .num_leds = 8,
294+ .leds = cambria_latch_leds,
295+ .mem = 0x53F40000,
296+};
297+
298+static struct platform_device cambria_latch_leds_device = {
299+ .name = "leds-latch",
300+ .id = -1,
301+ .dev.platform_data = &cambria_latch_leds_data,
302+};
303+
304+static struct resource cambria_usb0_resources[] = {
305+ {
306+ .start = 0xCD000000,
307+ .end = 0xCD000300,
308+ .flags = IORESOURCE_MEM,
309+ },
310+ {
311+ .start = 32,
312+ .flags = IORESOURCE_IRQ,
313+ },
314+};
315+
316+static struct resource cambria_usb1_resources[] = {
317+ {
318+ .start = 0xCE000000,
319+ .end = 0xCE000300,
320+ .flags = IORESOURCE_MEM,
321+ },
322+ {
323+ .start = 33,
324+ .flags = IORESOURCE_IRQ,
325+ },
326+};
327+
328+static u64 ehci_dma_mask = ~(u32)0;
329+
330+static struct platform_device cambria_usb0_device = {
331+ .name = "ixp4xx-ehci",
332+ .id = 0,
333+ .resource = cambria_usb0_resources,
334+ .num_resources = ARRAY_SIZE(cambria_usb0_resources),
335+ .dev = {
336+ .dma_mask = &ehci_dma_mask,
337+ .coherent_dma_mask = 0xffffffff,
338+ },
339+};
340+
341+static struct platform_device cambria_usb1_device = {
342+ .name = "ixp4xx-ehci",
343+ .id = 1,
344+ .resource = cambria_usb1_resources,
345+ .num_resources = ARRAY_SIZE(cambria_usb1_resources),
346+ .dev = {
347+ .dma_mask = &ehci_dma_mask,
348+ .coherent_dma_mask = 0xffffffff,
349+ },
350+};
351+
352+static struct platform_device *cambria_devices[] __initdata = {
353+ &cambria_i2c_gpio,
354+ &cambria_flash,
355+ &cambria_uart,
356+};
357+
358+static void __init cambria_gw23xx_setup(void)
359+{
360+ platform_device_register(&cambria_npec_device);
361+ platform_device_register(&cambria_npea_device);
362+}
363+
364+static void __init cambria_gw2350_setup(void)
365+{
366+ platform_device_register(&cambria_npec_device);
367+ platform_device_register(&cambria_npea_device);
368+
369+ platform_device_register(&cambria_usb0_device);
370+ platform_device_register(&cambria_usb1_device);
371+
372+ platform_device_register(&cambria_gpio_leds_device);
373+}
374+
375+static void __init cambria_gw2358_setup(void)
376+{
377+ platform_device_register(&cambria_npec_device);
378+ platform_device_register(&cambria_npea_device);
379+
380+ platform_device_register(&cambria_usb0_device);
381+ platform_device_register(&cambria_usb1_device);
382+
383+ platform_device_register(&cambria_pata);
384+
385+ platform_device_register(&cambria_latch_leds_device);
386+}
387+
388+static struct cambria_board_info cambria_boards[] __initdata = {
389+ {
390+ .model = "GW2350",
391+ .setup = cambria_gw2350_setup,
392+ }, {
393+ .model = "GW2358",
394+ .setup = cambria_gw2358_setup,
395+ }
396+};
397+
398+static struct cambria_board_info * __init cambria_find_board_info(char *model)
399+{
400+ int i;
401+ model[6] = '\0';
402+
403+ for (i = 0; i < ARRAY_SIZE(cambria_boards); i++) {
404+ struct cambria_board_info *info = &cambria_boards[i];
405+ if (strcmp(info->model, model) == 0)
406+ return info;
407+ }
408+
409+ return NULL;
410+}
411+
412+static struct memory_accessor *at24_mem_acc;
413+
414+static void at24_setup(struct memory_accessor *mem_acc, void *context)
415+{
416+ char mac_addr[ETH_ALEN];
417+ char model[7];
418+
419+ at24_mem_acc = mem_acc;
420+
421+ /* Read MAC addresses */
422+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
423+ memcpy(&cambria_npec_data.hwaddr, mac_addr, ETH_ALEN);
424+ }
425+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
426+ memcpy(&cambria_npea_data.hwaddr, mac_addr, ETH_ALEN);
427+ }
428+
429+ /* Read the first 6 bytes of the model number */
430+ if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
431+ cambria_info = cambria_find_board_info(model);
432+ }
433+
434+}
435+
436+static struct at24_platform_data cambria_eeprom_info = {
437+ .byte_len = 1024,
438+ .page_size = 16,
439+ .flags = AT24_FLAG_READONLY,
440+ .setup = at24_setup,
441+};
442+
443+static struct i2c_board_info __initdata cambria_i2c_board_info[] = {
444+ {
445+ I2C_BOARD_INFO("ds1672", 0x68),
446+ },
447+ {
448+ I2C_BOARD_INFO("ad7418", 0x28),
449+ },
450+ {
451+ I2C_BOARD_INFO("24c08", 0x51),
452+ .platform_data = &cambria_eeprom_info
453+ },
454+};
455+
456+static void __init cambria_init(void)
457+{
458+ ixp4xx_sys_init();
459+
460+ cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
461+ cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
462+
463+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
464+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
465+
466+ platform_add_devices(cambria_devices, ARRAY_SIZE(cambria_devices));
467+
468+ cambria_pata_resources[0].start = 0x53e00000;
469+ cambria_pata_resources[0].end = 0x53e3ffff;
470+
471+ cambria_pata_resources[1].start = 0x53e40000;
472+ cambria_pata_resources[1].end = 0x53e7ffff;
473+
474+ cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
475+ cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
476+
477+ i2c_register_board_info(0, cambria_i2c_board_info,
478+ ARRAY_SIZE(cambria_i2c_board_info));
479+}
480+
481+static int __init cambria_model_setup(void)
482+{
483+ if (!machine_is_cambria())
484+ return 0;
485+
486+ if (cambria_info) {
487+ printk(KERN_DEBUG "Running on Gateworks Cambria %s\n",
488+ cambria_info->model);
489+ cambria_info->setup();
490+ } else {
491+ printk(KERN_INFO "Unknown/missing Cambria model number"
492+ " -- defaults will be used\n");
493+ cambria_gw23xx_setup();
494+ }
495+
496+ return 0;
497+}
498+late_initcall(cambria_model_setup);
499+
500+MACHINE_START(CAMBRIA, "Gateworks Cambria series")
501+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
502+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
503+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
504+ .map_io = ixp4xx_map_io,
505+ .init_irq = ixp4xx_init_irq,
506+ .timer = &ixp4xx_timer,
507+ .boot_params = 0x0100,
508+ .init_machine = cambria_init,
509+MACHINE_END
510--- a/arch/arm/mach-ixp4xx/Kconfig
511+++ b/arch/arm/mach-ixp4xx/Kconfig
512@@ -25,6 +25,14 @@ config MACH_AVILA
513       Avila Network Platform. For more information on this platform,
514       see <file:Documentation/arm/IXP4xx>.
515 
516+config MACH_CAMBRIA
517+ bool "Cambria"
518+ select PCI
519+ help
520+ Say 'Y' here if you want your kernel to support the Gateworks
521+ Cambria series. For more information on this platform,
522+ see <file:Documentation/arm/IXP4xx>.
523+
524 config MACH_LOFT
525     bool "Loft"
526     depends on MACH_AVILA
527@@ -214,7 +222,7 @@ config CPU_IXP46X
528 
529 config CPU_IXP43X
530     bool
531- depends on MACH_KIXRP435
532+ depends on MACH_KIXRP435 || MACH_CAMBRIA
533     default y
534 
535 config MACH_GTWX5715
536--- a/arch/arm/mach-ixp4xx/Makefile
537+++ b/arch/arm/mach-ixp4xx/Makefile
538@@ -7,6 +7,7 @@ obj-pci-n :=
539 
540 obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
541 obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
542+obj-pci-$(CONFIG_MACH_CAMBRIA) += cambria-pci.o
543 obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
544 obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
545 obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
546@@ -29,6 +30,7 @@ obj-y += common.o
547 
548 obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
549 obj-$(CONFIG_MACH_AVILA) += avila-setup.o
550+obj-$(CONFIG_MACH_CAMBRIA) += cambria-setup.o
551 obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
552 obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
553 obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
554

Archive Download this file

Branches:
backfire
history
master
release_2010-11-17
release_2010-12-14
release_2011-02-23
release_2011-05-28
release_2011-08-27
release_2011-11-13
release_2012-03-18
release_2012-04-09
release_2012-10-11
uclibc_nptl



interactive