| 1 | --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c |
| 2 | +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c |
| 3 | @@ -15,6 +15,9 @@ |
| 4 | #include <linux/mtd/physmap.h> |
| 5 | #include <linux/mv643xx_eth.h> |
| 6 | #include <linux/ethtool.h> |
| 7 | +#include <linux/leds.h> |
| 8 | +#include <linux/gpio_keys.h> |
| 9 | +#include <linux/input.h> |
| 10 | #include <net/dsa.h> |
| 11 | #include <asm/mach-types.h> |
| 12 | #include <asm/gpio.h> |
| 13 | @@ -24,6 +27,80 @@ |
| 14 | #include "common.h" |
| 15 | #include "mpp.h" |
| 16 | |
| 17 | +/* |
| 18 | + * LEDs attached to GPIO |
| 19 | + */ |
| 20 | +static struct gpio_led wrt350n_v2_led_pins[] = { |
| 21 | + { |
| 22 | + .name = "wrt350nv2:green:power", |
| 23 | + .gpio = 0, |
| 24 | + .active_low = 1, |
| 25 | + }, { |
| 26 | + .name = "wrt350nv2:green:security", |
| 27 | + .gpio = 1, |
| 28 | + .active_low = 1, |
| 29 | + }, { |
| 30 | + .name = "wrt350nv2:orange:power", |
| 31 | + .gpio = 5, |
| 32 | + .active_low = 1, |
| 33 | + }, { |
| 34 | + .name = "wrt350nv2:green:usb", |
| 35 | + .gpio = 6, |
| 36 | + .active_low = 1, |
| 37 | + }, { |
| 38 | + .name = "wrt350nv2:green:wireless", |
| 39 | + .gpio = 7, |
| 40 | + .active_low = 1, |
| 41 | + }, |
| 42 | +}; |
| 43 | + |
| 44 | +static struct gpio_led_platform_data wrt350n_v2_led_data = { |
| 45 | + .leds = wrt350n_v2_led_pins, |
| 46 | + .num_leds = ARRAY_SIZE(wrt350n_v2_led_pins), |
| 47 | +}; |
| 48 | + |
| 49 | +static struct platform_device wrt350n_v2_leds = { |
| 50 | + .name = "leds-gpio", |
| 51 | + .id = -1, |
| 52 | + .dev = { |
| 53 | + .platform_data = &wrt350n_v2_led_data, |
| 54 | + }, |
| 55 | +}; |
| 56 | + |
| 57 | +/* |
| 58 | + * Buttons attached to GPIO |
| 59 | + */ |
| 60 | +static struct gpio_keys_button wrt350n_v2_buttons[] = { |
| 61 | + { |
| 62 | + .code = KEY_RESTART, |
| 63 | + .gpio = 3, |
| 64 | + .desc = "Reset Button", |
| 65 | + .active_low = 1, |
| 66 | + }, { |
| 67 | + .code = KEY_WLAN, |
| 68 | + .gpio = 2, |
| 69 | + .desc = "WPS Button", |
| 70 | + .active_low = 1, |
| 71 | + }, |
| 72 | +}; |
| 73 | + |
| 74 | +static struct gpio_keys_platform_data wrt350n_v2_button_data = { |
| 75 | + .buttons = wrt350n_v2_buttons, |
| 76 | + .nbuttons = ARRAY_SIZE(wrt350n_v2_buttons), |
| 77 | +}; |
| 78 | + |
| 79 | +static struct platform_device wrt350n_v2_button_device = { |
| 80 | + .name = "gpio-keys", |
| 81 | + .id = -1, |
| 82 | + .num_resources = 0, |
| 83 | + .dev = { |
| 84 | + .platform_data = &wrt350n_v2_button_data, |
| 85 | + }, |
| 86 | +}; |
| 87 | + |
| 88 | +/* |
| 89 | + * General setup |
| 90 | + */ |
| 91 | static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = { |
| 92 | { 0, MPP_GPIO }, /* Power LED green (0=on) */ |
| 93 | { 1, MPP_GPIO }, /* Security LED (0=on) */ |
| 94 | @@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void) |
| 95 | orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE, |
| 96 | WRT350N_V2_NOR_BOOT_SIZE); |
| 97 | platform_device_register(&wrt350n_v2_nor_flash); |
| 98 | + platform_device_register(&wrt350n_v2_button_device); |
| 99 | + platform_device_register(&wrt350n_v2_leds); |
| 100 | } |
| 101 | |
| 102 | static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| 103 | |
