| 1 | From 7b55ff7b9fd37ac8857746603ec580d277208f01 Mon Sep 17 00:00:00 2001 |
| 2 | From: Lars-Peter Clausen <lars@metafoo.de> |
| 3 | Date: Mon, 11 Jan 2010 04:29:40 +0100 |
| 4 | Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/053-adc.patch |
| 5 | |
| 6 | --- |
| 7 | drivers/misc/Kconfig | 11 +++++++++++ |
| 8 | drivers/misc/Makefile | 1 + |
| 9 | 2 files changed, 12 insertions(+), 0 deletions(-) |
| 10 | |
| 11 | --- a/drivers/misc/Kconfig |
| 12 | +++ b/drivers/misc/Kconfig |
| 13 | @@ -246,6 +246,17 @@ config EP93XX_PWM |
| 14 | To compile this driver as a module, choose M here: the module will |
| 15 | be called ep93xx_pwm. |
| 16 | |
| 17 | +config JZ4740_ADC |
| 18 | + tristate "Ingenic JZ4720/JZ4740 SoC ADC driver" |
| 19 | + depends on SOC_JZ4740 |
| 20 | + help |
| 21 | + If you say yes here you get support for the Ingenic JZ4720/JZ4740 SoC ADC |
| 22 | + core. It is required for the JZ4720/JZ4740 battery and touchscreen driver |
| 23 | + and is used to synchronize access to the adc core between those two. |
| 24 | + |
| 25 | + This driver can also be build as a module. If so, the module will be |
| 26 | + called jz4740-adc. |
| 27 | + |
| 28 | source "drivers/misc/c2port/Kconfig" |
| 29 | source "drivers/misc/eeprom/Kconfig" |
| 30 | source "drivers/misc/cb710/Kconfig" |
| 31 | --- a/drivers/misc/Makefile |
| 32 | +++ b/drivers/misc/Makefile |
| 33 | @@ -21,5 +21,6 @@ obj-$(CONFIG_HP_ILO) += hpilo.o |
| 34 | obj-$(CONFIG_ISL29003) += isl29003.o |
| 35 | obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o |
| 36 | obj-$(CONFIG_C2PORT) += c2port/ |
| 37 | +obj-$(CONFIG_JZ4740_ADC) += jz4740-adc.o |
| 38 | obj-y += eeprom/ |
| 39 | obj-y += cb710/ |
| 40 | |
