| 1 | This is the buildsystem for the OpenWrt Linux distribution. |
| 2 | |
| 3 | Please use "make menuconfig" to configure your appreciated |
| 4 | configuration for the toolchain and firmware. |
| 5 | |
| 6 | You need to have installed gcc, binutils, patch, bzip2, flex, |
| 7 | make, gettext, pkg-config, unzip, libz-dev and libc headers. |
| 8 | |
| 9 | Run "./scripts/feeds update" to get the latest package definitions |
| 10 | defined in feeds.conf / feeds.conf.default respectively |
| 11 | and "./scripts/feeds install" to install symlinks into "package/feeds/*". |
| 12 | |
| 13 | Use "make menuconfig" to configure your image. |
| 14 | |
| 15 | Simply running "make" will build your firmware. |
| 16 | It will download all sources, build the cross-compile toolchain, |
| 17 | the kernel and all choosen applications. |
| 18 | |
| 19 | You can use "scripts/flashing/flash.sh" for remotely updating your embedded |
| 20 | system via tftp. |
| 21 | |
| 22 | The OpenWrt system is documented in docs/. You will need a LaTeX distribution |
| 23 | and the tex4ht package to build the documentation. Type "make -C docs/" to build it. |
| 24 | |
| 25 | To build your own firmware you need to have access to a Linux, BSD or MacOSX system |
| 26 | (case-sensitive filesystem required). Cygwin will not be supported because of |
| 27 | the lack of case sensitiveness in the file system. |
| 28 | |
| 29 | |
| 30 | Sunshine! |
| 31 | Your OpenWrt Project |
| 32 | http://openwrt.org |
| 33 | |
| 34 | |
| 35 | |
