| 1 | #!/bin/sh /etc/rc.common |
| 2 | # (C) 2008 openwrt.org |
| 3 | |
| 4 | START=96 |
| 5 | |
| 6 | load_led() { |
| 7 | local name |
| 8 | local sysfs |
| 9 | local trigger |
| 10 | local dev |
| 11 | local mode |
| 12 | local default |
| 13 | local delayon |
| 14 | local delayoff |
| 15 | local interval |
| 16 | |
| 17 | config_get sysfs $1 sysfs |
| 18 | config_get name $1 name "$sysfs" |
| 19 | config_get trigger $1 trigger "none" |
| 20 | config_get dev $1 dev |
| 21 | config_get mode $1 mode "link" |
| 22 | config_get_bool default $1 default "nil" |
| 23 | config_get delayon $1 delayon |
| 24 | config_get delayoff $1 delayoff |
| 25 | config_get interval $1 interval "50" |
| 26 | config_get port_state $1 port_state |
| 27 | config_get delay $1 delay "150" |
| 28 | config_get message $1 message "" |
| 29 | |
| 30 | if [ "$trigger" = "rssi" ]; then |
| 31 | # handled by rssileds userspace process |
| 32 | return |
| 33 | fi |
| 34 | |
| 35 | [ -e /sys/class/leds/${sysfs}/brightness ] && { |
| 36 | echo "setting up led ${name}" |
| 37 | [ "$default" != nil ] && { |
| 38 | [ $default -eq 1 ] && |
| 39 | echo 1 >/sys/class/leds/${sysfs}/brightness |
| 40 | [ $default -eq 1 ] || |
| 41 | echo 0 >/sys/class/leds/${sysfs}/brightness |
| 42 | } |
| 43 | echo $trigger > /sys/class/leds/${sysfs}/trigger |
| 44 | case "$trigger" in |
| 45 | "netdev") |
| 46 | [ -n "$dev" ] && { |
| 47 | echo $dev > /sys/class/leds/${sysfs}/device_name |
| 48 | echo $mode > /sys/class/leds/${sysfs}/mode |
| 49 | } |
| 50 | ;; |
| 51 | |
| 52 | "timer") |
| 53 | [ -n "$delayon" ] && \ |
| 54 | echo $delayon > /sys/class/leds/${sysfs}/delay_on |
| 55 | [ -n "$delayoff" ] && \ |
| 56 | echo $delayoff > /sys/class/leds/${sysfs}/delay_off |
| 57 | ;; |
| 58 | |
| 59 | "usbdev") |
| 60 | [ -n "$dev" ] && { |
| 61 | echo $dev > /sys/class/leds/${sysfs}/device_name |
| 62 | echo $interval > /sys/class/leds/${sysfs}/activity_interval |
| 63 | } |
| 64 | ;; |
| 65 | |
| 66 | "port_state") |
| 67 | [ -n "$port_state" ] && \ |
| 68 | echo $port_state > /sys/class/leds/${sysfs}/port_state |
| 69 | ;; |
| 70 | |
| 71 | "morse") |
| 72 | echo $message > /sys/class/leds/${sysfs}/message |
| 73 | echo $delay > /sys/class/leds/${sysfs}/delay |
| 74 | ;; |
| 75 | |
| 76 | switch[0-9]*) |
| 77 | local port_mask |
| 78 | |
| 79 | config_get port_mask $1 port_mask |
| 80 | [ -n "$port_mask" ] && \ |
| 81 | echo $port_mask > /sys/class/leds/${sysfs}/port_mask |
| 82 | ;; |
| 83 | esac |
| 84 | } |
| 85 | } |
| 86 | |
| 87 | start() { |
| 88 | [ -e /sys/class/leds/ ] && { |
| 89 | config_load system |
| 90 | config_foreach load_led led |
| 91 | } |
| 92 | } |
| 93 | |
