Root/package/kernel/modules/other.mk

1#
2# Copyright (C) 2006-2012 OpenWrt.org
3#
4# This is free software, licensed under the GNU General Public License v2.
5# See /LICENSE for more information.
6#
7
8OTHER_MENU:=Other modules
9
10WATCHDOG_DIR:=watchdog
11
12
13define KernelPackage/bluetooth
14  SUBMENU:=$(OTHER_MENU)
15  TITLE:=Bluetooth support
16  DEPENDS:=@USB_SUPPORT +kmod-usb-core
17  KCONFIG:= \
18    CONFIG_BLUEZ \
19    CONFIG_BLUEZ_L2CAP \
20    CONFIG_BLUEZ_SCO \
21    CONFIG_BLUEZ_RFCOMM \
22    CONFIG_BLUEZ_BNEP \
23    CONFIG_BLUEZ_HCIUART \
24    CONFIG_BLUEZ_HCIUSB \
25    CONFIG_BLUEZ_HIDP \
26    CONFIG_BT \
27    CONFIG_BT_L2CAP=y \
28    CONFIG_BT_SCO=y \
29    CONFIG_BT_RFCOMM \
30    CONFIG_BT_BNEP \
31    CONFIG_BT_HCIBTUSB \
32    CONFIG_BT_HCIUSB \
33    CONFIG_BT_HCIUART \
34    CONFIG_BT_HCIUART_H4 \
35    CONFIG_BT_HIDP \
36    CONFIG_HID_SUPPORT=y
37  $(call AddDepends/crc16)
38  $(call AddDepends/hid)
39  $(call AddDepends/rfkill)
40  FILES:= \
41    $(LINUX_DIR)/net/bluetooth/bluetooth.ko \
42    $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.ko \
43    $(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
44    $(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
45    $(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
46    $(LINUX_DIR)/drivers/bluetooth/btusb.ko
47  AUTOLOAD:=$(call AutoLoad,90,bluetooth rfcomm bnep hidp hci_uart btusb)
48endef
49
50define KernelPackage/bluetooth/description
51 Kernel support for Bluetooth devices
52endef
53
54$(eval $(call KernelPackage,bluetooth))
55
56
57define KernelPackage/bluetooth-hci-h4p
58  SUBMENU:=$(OTHER_MENU)
59  TITLE:=HCI driver with H4 Nokia extensions
60  DEPENDS:=@TARGET_omap24xx +kmod-bluetooth
61  KCONFIG:=CONFIG_BT_HCIH4P
62  FILES:=$(LINUX_DIR)/drivers/bluetooth/hci_h4p/hci_h4p.ko
63  AUTOLOAD:=$(call AutoLoad,91,hci_h4p)
64endef
65
66define KernelPackage/bluetooth-hci-h4p/description
67  HCI driver with H4 Nokia extensions
68endef
69
70$(eval $(call KernelPackage,bluetooth-hci-h4p))
71
72
73define KernelPackage/eeprom-93cx6
74  SUBMENU:=$(OTHER_MENU)
75  TITLE:=EEPROM 93CX6 support
76  KCONFIG:=CONFIG_EEPROM_93CX6
77  FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.ko
78  AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
79endef
80
81define KernelPackage/eeprom-93cx6/description
82 Kernel module for EEPROM 93CX6 support
83endef
84
85$(eval $(call KernelPackage,eeprom-93cx6))
86
87
88define KernelPackage/eeprom-at24
89  SUBMENU:=$(OTHER_MENU)
90  TITLE:=EEPROM AT24 support
91  KCONFIG:=CONFIG_EEPROM_AT24
92  DEPENDS:=+kmod-i2c-core
93  FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
94  AUTOLOAD:=$(call AutoLoad,60,at24)
95endef
96
97define KernelPackage/eeprom-at24/description
98 Kernel module for most I2C EEPROMs
99endef
100
101$(eval $(call KernelPackage,eeprom-at24))
102
103
104define KernelPackage/eeprom-at25
105  SUBMENU:=$(OTHER_MENU)
106  TITLE:=EEPROM AT25 support
107  KCONFIG:=CONFIG_EEPROM_AT25
108  FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
109  AUTOLOAD:=$(call AutoLoad,61,at25)
110endef
111
112define KernelPackage/eeprom-at25/description
113 Kernel module for most SPI EEPROMs
114endef
115
116$(eval $(call KernelPackage,eeprom-at25))
117
118
119define KernelPackage/gpio-dev
120  SUBMENU:=$(OTHER_MENU)
121  TITLE:=Generic GPIO char device support
122  DEPENDS:=@GPIO_SUPPORT
123  KCONFIG:=CONFIG_GPIO_DEVICE
124  FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.ko
125  AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
126endef
127
128define KernelPackage/gpio-dev/description
129  Kernel module to allows control of GPIO pins using a character device.
130endef
131
132$(eval $(call KernelPackage,gpio-dev))
133
134
135define KernelPackage/gpio-nxp-74hc164
136  SUBMENU:=$(OTHER_MENU)
137  TITLE:=NXP 74HC164 GPIO expander support
138  KCONFIG:=CONFIG_GPIO_NXP_74HC164
139  FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
140  AUTOLOAD:=$(call AutoLoad,99,nxp_74hc164)
141endef
142
143define KernelPackage/gpio-nxp-74hc164/description
144  Kernel module for NXP 74HC164 GPIO expander
145endef
146
147$(eval $(call KernelPackage,gpio-nxp-74hc164))
148
149define KernelPackage/hid
150  SUBMENU:=$(OTHER_MENU)
151  TITLE:=HID Devices
152  KCONFIG:=CONFIG_HID
153  FILES:=$(LINUX_DIR)/drivers/hid/hid.ko
154  AUTOLOAD:=$(call AutoLoad,61,hid)
155  $(call AddDepends/input,+kmod-input-evdev)
156endef
157
158define KernelPackage/hid/description
159 Kernel modules for HID devices
160endef
161
162$(eval $(call KernelPackage,hid))
163
164
165define KernelPackage/input-core
166  SUBMENU:=$(OTHER_MENU)
167  TITLE:=Input device core
168  KCONFIG:=CONFIG_INPUT
169  FILES:=$(LINUX_DIR)/drivers/input/input-core.ko
170  AUTOLOAD:=$(call AutoLoad,19,input-core)
171endef
172
173define KernelPackage/input-core/description
174 Kernel modules for support of input device
175endef
176
177$(eval $(call KernelPackage,input-core))
178
179
180define KernelPackage/input-evdev
181  SUBMENU:=$(OTHER_MENU)
182  TITLE:=Input event device
183  KCONFIG:=CONFIG_INPUT_EVDEV
184  FILES:=$(LINUX_DIR)/drivers/input/evdev.ko
185  AUTOLOAD:=$(call AutoLoad,60,evdev)
186  $(call AddDepends/input)
187endef
188
189define KernelPackage/input-evdev/description
190 Kernel modules for support of input device events
191endef
192
193$(eval $(call KernelPackage,input-evdev))
194
195
196define KernelPackage/input-gpio-buttons
197  SUBMENU:=$(OTHER_MENU)
198  TITLE:=Polled GPIO buttons input device
199  DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
200  KCONFIG:= \
201    CONFIG_INPUT_GPIO_BUTTONS \
202    CONFIG_INPUT_MISC=y
203  FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.ko
204  AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
205endef
206
207define KernelPackage/input-gpio-buttons/description
208 Kernel module for support polled GPIO buttons input device
209endef
210
211$(eval $(call KernelPackage,input-gpio-buttons))
212
213
214define KernelPackage/input-gpio-keys
215  SUBMENU:=$(OTHER_MENU)
216  TITLE:=GPIO key support
217  DEPENDS:= @GPIO_SUPPORT
218  KCONFIG:= \
219    CONFIG_KEYBOARD_GPIO \
220    CONFIG_INPUT_KEYBOARD=y
221  FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.ko
222  AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
223  $(call AddDepends/input)
224endef
225
226define KernelPackage/input-gpio-keys/description
227 This driver implements support for buttons connected
228 to GPIO pins of various CPUs (and some other chips).
229endef
230
231$(eval $(call KernelPackage,input-gpio-keys))
232
233
234define KernelPackage/input-gpio-keys-polled
235  SUBMENU:=$(OTHER_MENU)
236  TITLE:=Polled GPIO key support
237  DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
238  KCONFIG:= \
239    CONFIG_KEYBOARD_GPIO_POLLED \
240    CONFIG_INPUT_KEYBOARD=y
241  FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys_polled.ko
242  AUTOLOAD:=$(call AutoLoad,62,gpio_keys_polled)
243  $(call AddDepends/input)
244endef
245
246define KernelPackage/input-gpio-keys-polled/description
247 Kernel module for support polled GPIO keys input device
248endef
249
250$(eval $(call KernelPackage,input-gpio-keys-polled))
251
252
253define KernelPackage/input-gpio-encoder
254  SUBMENU:=$(OTHER_MENU)
255  TITLE:=GPIO rotay encoder
256  KCONFIG:=CONFIG_INPUT_GPIO_ROTARY_ENCODER
257  FILES:=$(LINUX_DIR)/drivers/input/misc/rotary_encoder.ko
258  AUTOLOAD:=$(call AutoLoad,62,rotary_encoder)
259  $(call AddDepends/input,@GPIO_SUPPORT)
260endef
261
262define KernelPackage/gpio-encoder/description
263 Kernel module to use rotary encoders connected to GPIO pins
264endef
265
266$(eval $(call KernelPackage,input-gpio-encoder))
267
268
269define KernelPackage/input-joydev
270  SUBMENU:=$(OTHER_MENU)
271  TITLE:=Joystick device support
272  KCONFIG:=CONFIG_INPUT_JOYDEV
273  FILES:=$(LINUX_DIR)/drivers/input/joydev.ko
274  AUTOLOAD:=$(call AutoLoad,62,joydev)
275  $(call AddDepends/input)
276endef
277
278define KernelPackage/input-joydev/description
279  Kernel module for joystick support
280endef
281
282$(eval $(call KernelPackage,input-joydev))
283
284
285define KernelPackage/input-polldev
286  SUBMENU:=$(OTHER_MENU)
287  TITLE:=Polled Input device support
288  KCONFIG:=CONFIG_INPUT_POLLDEV
289  FILES:=$(LINUX_DIR)/drivers/input/input-polldev.ko
290  AUTOLOAD:=$(call AutoLoad,20,input-polldev)
291  $(call AddDepends/input)
292endef
293
294define KernelPackage/input-polldev/description
295 Kernel module for support of polled input devices
296endef
297
298$(eval $(call KernelPackage,input-polldev))
299
300define KernelPackage/input-matrixkmap
301   SUBMENU:=$(OTHER_MENU)
302   TITLE:=Input matrix devices support
303   KCONFIG:=CONFIG_INPUT_MATRIXKMAP
304   DEPENDS:=@LINUX_3_6||@LINUX_3_7
305   FILES:=$(LINUX_DIR)/drivers/input/matrix-keymap.ko
306   AUTOLOAD:=$(call AutoLoad,20,matrix-keymap)
307   $(call AddDepends/input)
308endef
309
310define KernelPackage/input-matrix/description
311  Kernel module support for input matrix devices
312endef
313
314$(eval $(call KernelPackage,input-matrixkmap))
315
316define KernelPackage/lp
317  SUBMENU:=$(OTHER_MENU)
318  TITLE:=Parallel port and line printer support
319  DEPENDS:=@BROKEN
320  KCONFIG:= \
321    CONFIG_PARPORT \
322    CONFIG_PRINTER \
323    CONFIG_PPDEV
324  FILES:= \
325    $(LINUX_DIR)/drivers/parport/parport.ko \
326    $(LINUX_DIR)/drivers/char/lp.ko \
327    $(LINUX_DIR)/drivers/char/ppdev.ko
328  AUTOLOAD:=$(call AutoLoad,50,parport lp)
329endef
330
331$(eval $(call KernelPackage,lp))
332
333
334define KernelPackage/mmc
335  SUBMENU:=$(OTHER_MENU)
336  TITLE:=MMC/SD Card Support
337  KCONFIG:= \
338    CONFIG_MMC \
339    CONFIG_MMC_BLOCK \
340    CONFIG_MMC_DEBUG=n \
341    CONFIG_MMC_UNSAFE_RESUME=n \
342    CONFIG_MMC_BLOCK_BOUNCE=y \
343    CONFIG_MMC_SDHCI=n \
344    CONFIG_MMC_TIFM_SD=n \
345    CONFIG_MMC_WBSD=n \
346    CONFIG_SDIO_UART=n
347  FILES:= \
348    $(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
349    $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
350  AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block,1)
351endef
352
353define KernelPackage/mmc/description
354 Kernel support for MMC/SD cards
355endef
356
357$(eval $(call KernelPackage,mmc))
358
359
360define KernelPackage/oprofile
361  SUBMENU:=$(OTHER_MENU)
362  TITLE:=OProfile profiling support
363  KCONFIG:=CONFIG_OPROFILE
364  FILES:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/oprofile/oprofile.ko
365  DEPENDS:=@KERNEL_PROFILING
366endef
367
368define KernelPackage/oprofile/description
369  Kernel module for support for oprofile system profiling.
370endef
371
372$(eval $(call KernelPackage,oprofile))
373
374
375define KernelPackage/rfkill
376  SUBMENU:=$(OTHER_MENU)
377  TITLE:=RF switch subsystem support
378  KCONFIG:= \
379    CONFIG_RFKILL \
380    CONFIG_RFKILL_INPUT=y \
381    CONFIG_RFKILL_LEDS=y \
382    CONFIG_RFKILL_GPIO=y
383  FILES:= \
384    $(LINUX_DIR)/net/rfkill/rfkill.ko
385  AUTOLOAD:=$(call AutoLoad,20,rfkill)
386  $(call SetDepends/rfkill)
387endef
388
389define KernelPackage/rfkill/description
390  Say Y here if you want to have control over RF switches
391  found on many WiFi and Bluetooth cards.
392endef
393
394$(eval $(call KernelPackage,rfkill))
395
396
397define KernelPackage/softdog
398  SUBMENU:=$(OTHER_MENU)
399  TITLE:=Software watchdog driver
400  KCONFIG:=CONFIG_SOFT_WATCHDOG
401  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
402  AUTOLOAD:=$(call AutoLoad,50,softdog)
403endef
404
405define KernelPackage/softdog/description
406 Software watchdog driver
407endef
408
409$(eval $(call KernelPackage,softdog))
410
411
412define KernelPackage/ssb
413  SUBMENU:=$(OTHER_MENU)
414  TITLE:=Silicon Sonics Backplane glue code
415  DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
416  KCONFIG:=\
417    CONFIG_SSB \
418    CONFIG_SSB_B43_PCI_BRIDGE=y \
419    CONFIG_SSB_DRIVER_MIPS=n \
420    CONFIG_SSB_DRIVER_PCICORE=y \
421    CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
422    CONFIG_SSB_PCIHOST=y \
423    CONFIG_SSB_PCIHOST_POSSIBLE=y \
424    CONFIG_SSB_POSSIBLE=y \
425    CONFIG_SSB_SPROM=y \
426    CONFIG_SSB_SILENT=y
427  FILES:=$(LINUX_DIR)/drivers/ssb/ssb.ko
428  AUTOLOAD:=$(call AutoLoad,29,ssb)
429endef
430
431define KernelPackage/ssb/description
432  Silicon Sonics Backplane glue code.
433endef
434
435$(eval $(call KernelPackage,ssb))
436
437
438define KernelPackage/bcma
439  SUBMENU:=$(OTHER_MENU)
440  TITLE:=BCMA support
441  DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx
442  KCONFIG:=\
443    CONFIG_BCMA \
444    CONFIG_BCMA_POSSIBLE=y \
445    CONFIG_BCMA_BLOCKIO=y \
446    CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
447    CONFIG_BCMA_HOST_PCI=y \
448    CONFIG_BCMA_DRIVER_MIPS=n \
449    CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
450    CONFIG_BCMA_DRIVER_GMAC_CMN=n \
451    CONFIG_BCMA_DEBUG=n
452  FILES:=$(LINUX_DIR)/drivers/bcma/bcma.ko
453  AUTOLOAD:=$(call AutoLoad,29,bcma)
454endef
455
456define KernelPackage/bcma/description
457   Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture.
458endef
459
460$(eval $(call KernelPackage,bcma))
461
462
463define KernelPackage/wdt-omap
464  SUBMENU:=$(OTHER_MENU)
465  TITLE:=OMAP Watchdog timer
466  DEPENDS:=@(TARGET_omap24xx||TARGET_omap35xx)
467  KCONFIG:=CONFIG_OMAP_WATCHDOG
468  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/omap_wdt.ko
469  AUTOLOAD:=$(call AutoLoad,50,omap_wdt.ko)
470endef
471
472define KernelPackage/wdt-omap/description
473  Kernel module for TI omap watchdog timer.
474endef
475
476$(eval $(call KernelPackage,wdt-omap))
477
478
479define KernelPackage/wdt-orion
480  SUBMENU:=$(OTHER_MENU)
481  TITLE:=Marvell Orion Watchdog timer
482  DEPENDS:=@TARGET_orion||@TARGET_kirkwood
483  KCONFIG:=CONFIG_ORION_WATCHDOG
484  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
485  AUTOLOAD:=$(call AutoLoad,50,orion_wdt)
486endef
487
488define KernelPackage/wdt-orion/description
489  Kernel module for Marvell orion watchdog timer.
490endef
491
492$(eval $(call KernelPackage,wdt-orion))
493
494
495define KernelPackage/booke-wdt
496  SUBMENU:=$(OTHER_MENU)
497  TITLE:=PowerPC Book-E Watchdog Timer
498  DEPENDS:=@(TARGET_mpc85xx||TARGET_ppc40x||TARGET_ppc44x)
499  KCONFIG:=CONFIG_BOOKE_WDT
500  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/booke_wdt.ko
501  AUTOLOAD:=$(call AutoLoad,50,booke_wdt)
502endef
503
504define KernelPackage/booke-wdt/description
505  Kernel module for PowerPC Book-E Watchdog Timer.
506endef
507
508$(eval $(call KernelPackage,booke-wdt))
509
510
511define KernelPackage/pwm
512  SUBMENU:=$(OTHER_MENU)
513  TITLE:=PWM generic API
514  KCONFIG:=CONFIG_GENERIC_PWM
515  FILES:=$(LINUX_DIR)/drivers/pwm/pwm.ko
516  AUTOLOAD:=$(call AutoLoad,50,pwm)
517endef
518
519define KernelPackage/pwm/description
520 Kernel module that implement a generic PWM API
521endef
522
523$(eval $(call KernelPackage,pwm))
524
525
526define KernelPackage/pwm-gpio
527  SUBMENU:=$(OTHER_MENU)
528  TITLE:=PWM over GPIO
529  DEPENDS:=+kmod-pwm
530  KCONFIG:=CONFIG_GPIO_PWM
531  FILES:=$(LINUX_DIR)/drivers/pwm/gpio-pwm.ko
532  AUTOLOAD:=$(call AutoLoad,51,gpio-pwm)
533endef
534
535define KernelPackage/pwm-gpio/description
536 Kernel module to models a single-channel PWM device using a timer and a GPIO pin
537endef
538
539$(eval $(call KernelPackage,pwm-gpio))
540
541
542define KernelPackage/rtc-marvell
543  SUBMENU:=$(OTHER_MENU)
544  TITLE:=Marvell SoC built-in RTC support
545  $(call AddDepends/rtc)
546  DEPENDS+=@TARGET_kirkwood||TARGET_orion
547  KCONFIG:=CONFIG_RTC_DRV_MV
548  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko
549  AUTOLOAD:=$(call AutoLoad,60,rtc-mv)
550endef
551
552define KernelPackage/rtc-marvell/description
553 Kernel module for Marvell SoC built-in RTC.
554endef
555
556$(eval $(call KernelPackage,rtc-marvell))
557
558define KernelPackage/rtc-pcf8563
559  SUBMENU:=$(OTHER_MENU)
560  TITLE:=Philips PCF8563/Epson RTC8564 RTC support
561  $(call AddDepends/rtc)
562  KCONFIG:=CONFIG_RTC_DRV_PCF8563
563  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
564  AUTOLOAD:=$(call AutoLoad,60,rtc-pcf8563)
565endef
566
567define KernelPackage/rtc-pcf8563/description
568 Kernel module for Philips PCF8563 RTC chip.
569 The Epson RTC8564 should work as well.
570endef
571
572$(eval $(call KernelPackage,rtc-pcf8563))
573
574
575define KernelPackage/rtc-pcf2123
576  SUBMENU:=$(OTHER_MENU)
577  TITLE:=Philips PCF2123 RTC support
578  $(call AddDepends/rtc)
579  KCONFIG:=CONFIG_RTC_DRV_PCF2123
580  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
581  AUTOLOAD:=$(call AutoLoad,60,rtc-pcf2123)
582endef
583
584define KernelPackage/rtc-pcf2123/description
585 Kernel module for Philips PCF2123 RTC chip.
586endef
587
588$(eval $(call KernelPackage,rtc-pcf2123))
589
590define KernelPackage/rtc-pt7c4338
591  SUBMENU:=$(OTHER_MENU)
592  TITLE:=Pericom PT7C4338 RTC support
593  $(call AddDepends/rtc,+kmod-i2c-core)
594  KCONFIG:=CONFIG_RTC_DRV_PT7C4338
595  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
596  AUTOLOAD:=$(call AutoLoad,60,rtc-pt7c4338)
597endef
598
599define KernelPackage/rtc-pt7c4338/description
600 Kernel module for Pericom PT7C4338 i2c RTC chip.
601endef
602
603$(eval $(call KernelPackage,rtc-pt7c4338))
604
605
606define KernelPackage/mtdtests
607  SUBMENU:=$(OTHER_MENU)
608  TITLE:=MTD subsystem tests
609  KCONFIG:=CONFIG_MTD_TESTS
610  FILES:=\
611    $(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \
612    $(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \
613    $(LINUX_DIR)/drivers/mtd/tests/mtd_pagetest.ko \
614    $(LINUX_DIR)/drivers/mtd/tests/mtd_readtest.ko \
615    $(LINUX_DIR)/drivers/mtd/tests/mtd_speedtest.ko \
616    $(LINUX_DIR)/drivers/mtd/tests/mtd_stresstest.ko \
617    $(LINUX_DIR)/drivers/mtd/tests/mtd_subpagetest.ko \
618    $(LINUX_DIR)/drivers/mtd/tests/mtd_torturetest.ko
619endef
620
621define KernelPackage/mtdtests/description
622 Kernel modules for MTD subsystem/driver testing.
623endef
624
625$(eval $(call KernelPackage,mtdtests))
626
627
628define KernelPackage/nand
629  SUBMENU:=$(OTHER_MENU)
630  TITLE:=NAND flash support
631  KCONFIG:=CONFIG_MTD_NAND \
632    CONFIG_MTD_NAND_IDS \
633    CONFIG_MTD_NAND_ECC
634  FILES:= \
635    $(LINUX_DIR)/drivers/mtd/nand/nand_ids.ko \
636    $(LINUX_DIR)/drivers/mtd/nand/nand_ecc.ko \
637    $(LINUX_DIR)/drivers/mtd/nand/nand.ko
638  AUTOLOAD:=$(call AutoLoad,20,nand_ids nand_ecc nand)
639endef
640
641define KernelPackage/nand/description
642 Kernel module for NAND support.
643endef
644
645$(eval $(call KernelPackage,nand))
646
647
648define KernelPackage/nandsim
649  SUBMENU:=$(OTHER_MENU)
650  TITLE:=NAND simulator
651  DEPENDS:=+kmod-nand
652  KCONFIG:=CONFIG_MTD_NAND_NANDSIM
653  FILES:=$(LINUX_DIR)/drivers/mtd/nand/nandsim.ko
654endef
655
656define KernelPackage/nandsim/description
657 Kernel module for NAND flash simulation.
658endef
659
660$(eval $(call KernelPackage,nandsim))
661
662define KernelPackage/serial-8250
663  SUBMENU:=$(OTHER_MENU)
664  TITLE:=8250 UARTs
665  KCONFIG:= CONFIG_SERIAL_8250 \
666    CONFIG_SERIAL_8250_NR_UARTS=16 \
667      CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
668      CONFIG_SERIAL_8250_EXTENDED=y \
669      CONFIG_SERIAL_8250_MANY_PORTS=y \
670    CONFIG_SERIAL_8250_SHARE_IRQ=y \
671    CONFIG_SERIAL_8250_DETECT_IRQ=n \
672    CONFIG_SERIAL_8250_RSA=n
673  FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko
674endef
675
676define KernelPackage/serial-8250/description
677 Kernel module for 8250 UART based serial ports.
678endef
679
680$(eval $(call KernelPackage,serial-8250))
681
682
683define KernelPackage/acpi-button
684  SUBMENU:=$(OTHER_MENU)
685  TITLE:=ACPI Button Support
686  DEPENDS:=@(TARGET_x86_generic||TARGET_x86_kvm_guest||TARGET_x86_xen_domu) +kmod-input-evdev
687  KCONFIG:=CONFIG_ACPI_BUTTON
688  FILES:=$(LINUX_DIR)/drivers/acpi/button.ko
689  AUTOLOAD:=$(call AutoLoad,06,button)
690endef
691
692define KernelPackage/acpi-button/description
693 Kernel module for ACPI Button support
694endef
695
696$(eval $(call KernelPackage,acpi-button))
697
698define KernelPackage/regmap
699  SUBMENU:=$(OTHER_MENU)
700  TITLE:=Generic register map support
701  KCONFIG:=CONFIG_REGMAP=y \
702       CONFIG_REGMAP_SPI \
703       CONFIG_REGMAP_I2C
704  FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
705     $(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko
706  AUTOLOAD:=$(call AutoLoad,10,regmap-i2c regmap-spi)
707endef
708
709define KernelPackage/regmap/description
710  Generic register map support
711endef
712
713$(eval $(call KernelPackage,regmap))
714
715define KernelPackage/ikconfig
716  SUBMENU:=$(OTHER_MENU)
717  TITLE:=Kernel configuration via /proc/config.gz
718  KCONFIG:=CONFIG_IKCONFIG \
719       CONFIG_IKCONFIG_PROC=y
720  FILES:=$(LINUX_DIR)/kernel/configs.ko
721  AUTOLOAD:=$(call AutoLoad,70,configs)
722endef
723
724define KernelPackage/ikconfig/description
725    Kernel configuration via /proc/config.gz
726endef
727
728$(eval $(call KernelPackage,ikconfig))
729

Archive Download this file

Branches:
backfire
history
master
release_2010-11-17
release_2010-12-14
release_2011-02-23
release_2011-05-28
release_2011-08-27
release_2011-11-13
release_2012-03-18
release_2012-04-09
release_2012-10-11
uclibc_nptl



interactive