| 1 | /****************************************************************************** |
| 2 | ** |
| 3 | ** FILE NAME : ifxmips_atm_fw_regs_danube.h |
| 4 | ** PROJECT : UEIP |
| 5 | ** MODULES : ATM (ADSL) |
| 6 | ** |
| 7 | ** DATE : 1 AUG 2005 |
| 8 | ** AUTHOR : Xu Liang |
| 9 | ** DESCRIPTION : ATM Driver (Firmware Registers) |
| 10 | ** COPYRIGHT : Copyright (c) 2006 |
| 11 | ** Infineon Technologies AG |
| 12 | ** Am Campeon 1-12, 85579 Neubiberg, Germany |
| 13 | ** |
| 14 | ** This program is free software; you can redistribute it and/or modify |
| 15 | ** it under the terms of the GNU General Public License as published by |
| 16 | ** the Free Software Foundation; either version 2 of the License, or |
| 17 | ** (at your option) any later version. |
| 18 | ** |
| 19 | ** HISTORY |
| 20 | ** $Date $Author $Comment |
| 21 | ** 4 AUG 2005 Xu Liang Initiate Version |
| 22 | ** 23 OCT 2006 Xu Liang Add GPL header. |
| 23 | ** 9 JAN 2007 Xu Liang First version got from Anand (IC designer) |
| 24 | *******************************************************************************/ |
| 25 | |
| 26 | |
| 27 | |
| 28 | #ifndef IFXMIPS_ATM_FW_REGS_DANUBE_H |
| 29 | #define IFXMIPS_ATM_FW_REGS_DANUBE_H |
| 30 | |
| 31 | #define FW_VER_ID ((volatile struct fw_ver_id *) SB_BUFFER(0x2001)) |
| 32 | #define CFG_WRX_HTUTS SB_BUFFER(0x2400) /* WAN RX HTU Table Size, must be configured before enable PPE firmware. */ |
| 33 | #define CFG_WRX_QNUM SB_BUFFER(0x2401) /* WAN RX Queue Number */ |
| 34 | #define CFG_WRX_DCHNUM SB_BUFFER(0x2402) /* WAN RX DMA Channel Number, no more than 8, must be configured before enable PPE firmware. */ |
| 35 | #define CFG_WTX_DCHNUM SB_BUFFER(0x2403) /* WAN TX DMA Channel Number, no more than 16, must be configured before enable PPE firmware. */ |
| 36 | #define CFG_WRDES_DELAY SB_BUFFER(0x2404) /* WAN Descriptor Write Delay, must be configured before enable PPE firmware. */ |
| 37 | #define WRX_DMACH_ON SB_BUFFER(0x2405) /* WAN RX DMA Channel Enable, must be configured before enable PPE firmware. */ |
| 38 | #define WTX_DMACH_ON SB_BUFFER(0x2406) /* WAN TX DMA Channel Enable, must be configured before enable PPE firmware. */ |
| 39 | #define WRX_HUNT_BITTH SB_BUFFER(0x2407) /* WAN RX HUNT Threshold, must be between 2 to 8. */ |
| 40 | |
| 41 | #define WRX_QUEUE_CONFIG(i) ((struct wrx_queue_config*) SB_BUFFER(0x2500 + (i) * 20)) |
| 42 | #define WRX_DMA_CHANNEL_CONFIG(i) ((struct wrx_dma_channel_config*) SB_BUFFER(0x2640 + (i) * 7)) |
| 43 | #define WTX_PORT_CONFIG(i) ((struct wtx_port_config*) SB_BUFFER(0x2440 + (i))) |
| 44 | #define WTX_QUEUE_CONFIG(i) ((struct wtx_queue_config*) SB_BUFFER(0x2710 + (i) * 27)) |
| 45 | #define WTX_DMA_CHANNEL_CONFIG(i) ((struct wtx_dma_channel_config*) SB_BUFFER(0x2711 + (i) * 27)) |
| 46 | #define WAN_MIB_TABLE ((struct wan_mib_table*) SB_BUFFER(0x2410)) |
| 47 | #define HTU_ENTRY(i) ((struct htu_entry*) SB_BUFFER(0x2000 + (i))) |
| 48 | #define HTU_MASK(i) ((struct htu_mask*) SB_BUFFER(0x2020 + (i))) |
| 49 | #define HTU_RESULT(i) ((struct htu_result*) SB_BUFFER(0x2040 + (i))) |
| 50 | |
| 51 | #endif |
| 52 | |
