| 1 | /****************************************************************************** |
| 2 | ** |
| 3 | ** FILE NAME : ifxmips_atm_fw_regs_vr9.h |
| 4 | ** PROJECT : UEIP |
| 5 | ** MODULES : ATM (ADSL) |
| 6 | ** |
| 7 | ** DATE : 1 AUG 2005 |
| 8 | ** AUTHOR : Xu Liang |
| 9 | ** DESCRIPTION : ATM Driver (Firmware Registers) |
| 10 | ** COPYRIGHT : Copyright (c) 2006 |
| 11 | ** Infineon Technologies AG |
| 12 | ** Am Campeon 1-12, 85579 Neubiberg, Germany |
| 13 | ** |
| 14 | ** This program is free software; you can redistribute it and/or modify |
| 15 | ** it under the terms of the GNU General Public License as published by |
| 16 | ** the Free Software Foundation; either version 2 of the License, or |
| 17 | ** (at your option) any later version. |
| 18 | ** |
| 19 | ** HISTORY |
| 20 | ** $Date $Author $Comment |
| 21 | ** 4 AUG 2005 Xu Liang Initiate Version |
| 22 | ** 23 OCT 2006 Xu Liang Add GPL header. |
| 23 | ** 9 JAN 2007 Xu Liang First version got from Anand (IC designer) |
| 24 | *******************************************************************************/ |
| 25 | |
| 26 | |
| 27 | |
| 28 | #ifndef IFXMIPS_ATM_FW_REGS_VR9_H |
| 29 | #define IFXMIPS_ATM_FW_REGS_VR9_H |
| 30 | |
| 31 | #define FW_VER_ID ((volatile struct fw_ver_id *) SB_BUFFER(0x2001)) |
| 32 | |
| 33 | /* WAN RX HTU Table Size, must be configured before enable PPE firmware. */ |
| 34 | #define CFG_WRX_HTUTS SB_BUFFER(0x2010) |
| 35 | /* WAN RX Queue Number */ |
| 36 | #define CFG_WRX_QNUM SB_BUFFER(0x2011) |
| 37 | /* WAN RX DMA Channel Number, no more than 8, must be configured before enable PPE firmware. */ |
| 38 | #define CFG_WRX_DCHNUM SB_BUFFER(0x2012) |
| 39 | /* WAN TX DMA Channel Number, no more than 16, must be configured before enable PPE firmware. */ |
| 40 | #define CFG_WTX_DCHNUM SB_BUFFER(0x2013) |
| 41 | /* WAN Descriptor Write Delay, must be configured before enable PPE firmware. */ |
| 42 | #define CFG_WRDES_DELAY SB_BUFFER(0x2014) |
| 43 | /* WAN RX DMA Channel Enable, must be configured before enable PPE firmware. */ |
| 44 | #define WRX_DMACH_ON SB_BUFFER(0x2015) |
| 45 | /* WAN TX DMA Channel Enable, must be configured before enable PPE firmware. */ |
| 46 | #define WTX_DMACH_ON SB_BUFFER(0x2016) |
| 47 | /* WAN RX HUNT Threshold, must be between 2 to 8. */ |
| 48 | #define WRX_HUNT_BITTH SB_BUFFER(0x2017) |
| 49 | /* i < 16 */ |
| 50 | #define WRX_QUEUE_CONFIG(i) ((struct wrx_queue_config *) SB_BUFFER(0x4C00 + (i) * 20)) |
| 51 | /* i < 8 */ |
| 52 | #define WRX_DMA_CHANNEL_CONFIG(i) ((struct wrx_dma_channel_config *) SB_BUFFER(0x4F80 + (i) * 7)) |
| 53 | /* i < 2 */ |
| 54 | #define WTX_PORT_CONFIG(i) ((struct wtx_port_config *) SB_BUFFER(0x4FB8 + (i))) |
| 55 | /* i < 16 */ |
| 56 | #define WTX_QUEUE_CONFIG(i) ((struct wtx_queue_config *) SB_BUFFER(0x3A00 + (i) * 27)) |
| 57 | /* i < 16 */ |
| 58 | #define WTX_DMA_CHANNEL_CONFIG(i) ((struct wtx_dma_channel_config *) SB_BUFFER(0x3A01 + (i) * 27)) |
| 59 | |
| 60 | #define WAN_MIB_TABLE ((struct wan_mib_table *) SB_BUFFER(0x4EF0)) |
| 61 | /* i < 32 */ |
| 62 | #define HTU_ENTRY(i) ((struct htu_entry *) SB_BUFFER(0x26A0 + (i))) |
| 63 | /* i < 32 */ |
| 64 | #define HTU_MASK(i) ((struct htu_mask *) SB_BUFFER(0x26C0 + (i))) |
| 65 | /* i < 32 */ |
| 66 | #define HTU_RESULT(i) ((struct htu_result *) SB_BUFFER(0x26E0 + (i))) |
| 67 | /* bit 0~3 - 0x0F: in showtime, 0x00: not in showtime */ |
| 68 | #define UTP_CFG SB_BUFFER(0x2018) |
| 69 | |
| 70 | |
| 71 | |
| 72 | #endif // IFXMIPS_ATM_FW_REGS_VR9_H |
| 73 | |
