| 1 | /* |
| 2 | * D-Link DIR-825 rev. B1 board support |
| 3 | * |
| 4 | * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o. |
| 5 | * |
| 6 | * based on mach-wndr3700.c |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify it |
| 9 | * under the terms of the GNU General Public License version 2 as published |
| 10 | * by the Free Software Foundation. |
| 11 | */ |
| 12 | |
| 13 | #include <linux/platform_device.h> |
| 14 | #include <linux/delay.h> |
| 15 | #include <linux/rtl8366.h> |
| 16 | |
| 17 | #include <asm/mach-ath79/ath79.h> |
| 18 | |
| 19 | #include "dev-eth.h" |
| 20 | #include "dev-ap9x-pci.h" |
| 21 | #include "dev-gpio-buttons.h" |
| 22 | #include "dev-leds-gpio.h" |
| 23 | #include "dev-m25p80.h" |
| 24 | #include "dev-usb.h" |
| 25 | #include "machtypes.h" |
| 26 | |
| 27 | #define DIR825B1_GPIO_LED_BLUE_USB 0 |
| 28 | #define DIR825B1_GPIO_LED_ORANGE_POWER 1 |
| 29 | #define DIR825B1_GPIO_LED_BLUE_POWER 2 |
| 30 | #define DIR825B1_GPIO_LED_BLUE_WPS 4 |
| 31 | #define DIR825B1_GPIO_LED_ORANGE_PLANET 6 |
| 32 | #define DIR825B1_GPIO_LED_BLUE_PLANET 11 |
| 33 | |
| 34 | #define DIR825B1_GPIO_BTN_RESET 3 |
| 35 | #define DIR825B1_GPIO_BTN_WPS 8 |
| 36 | |
| 37 | #define DIR825B1_GPIO_RTL8366_SDA 5 |
| 38 | #define DIR825B1_GPIO_RTL8366_SCK 7 |
| 39 | |
| 40 | #define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */ |
| 41 | #define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL) |
| 42 | |
| 43 | #define DIR825B1_CAL0_OFFSET 0x1000 |
| 44 | #define DIR825B1_CAL1_OFFSET 0x5000 |
| 45 | #define DIR825B1_MAC0_OFFSET 0xffa0 |
| 46 | #define DIR825B1_MAC1_OFFSET 0xffb4 |
| 47 | |
| 48 | #define DIR825B1_CAL_LOCATION_0 0x1f660000 |
| 49 | #define DIR825B1_CAL_LOCATION_1 0x1f7f0000 |
| 50 | |
| 51 | static struct gpio_led dir825b1_leds_gpio[] __initdata = { |
| 52 | { |
| 53 | .name = "d-link:blue:usb", |
| 54 | .gpio = DIR825B1_GPIO_LED_BLUE_USB, |
| 55 | .active_low = 1, |
| 56 | }, { |
| 57 | .name = "d-link:orange:power", |
| 58 | .gpio = DIR825B1_GPIO_LED_ORANGE_POWER, |
| 59 | .active_low = 1, |
| 60 | }, { |
| 61 | .name = "d-link:blue:power", |
| 62 | .gpio = DIR825B1_GPIO_LED_BLUE_POWER, |
| 63 | .active_low = 1, |
| 64 | }, { |
| 65 | .name = "d-link:blue:wps", |
| 66 | .gpio = DIR825B1_GPIO_LED_BLUE_WPS, |
| 67 | .active_low = 1, |
| 68 | }, { |
| 69 | .name = "d-link:orange:planet", |
| 70 | .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET, |
| 71 | .active_low = 1, |
| 72 | }, { |
| 73 | .name = "d-link:blue:planet", |
| 74 | .gpio = DIR825B1_GPIO_LED_BLUE_PLANET, |
| 75 | .active_low = 1, |
| 76 | } |
| 77 | }; |
| 78 | |
| 79 | static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = { |
| 80 | { |
| 81 | .desc = "reset", |
| 82 | .type = EV_KEY, |
| 83 | .code = KEY_RESTART, |
| 84 | .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, |
| 85 | .gpio = DIR825B1_GPIO_BTN_RESET, |
| 86 | .active_low = 1, |
| 87 | }, { |
| 88 | .desc = "wps", |
| 89 | .type = EV_KEY, |
| 90 | .code = KEY_WPS_BUTTON, |
| 91 | .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, |
| 92 | .gpio = DIR825B1_GPIO_BTN_WPS, |
| 93 | .active_low = 1, |
| 94 | } |
| 95 | }; |
| 96 | |
| 97 | static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = { |
| 98 | { .reg = 0x06, .val = 0x0108 }, |
| 99 | }; |
| 100 | |
| 101 | static struct rtl8366_platform_data dir825b1_rtl8366s_data = { |
| 102 | .gpio_sda = DIR825B1_GPIO_RTL8366_SDA, |
| 103 | .gpio_sck = DIR825B1_GPIO_RTL8366_SCK, |
| 104 | .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals), |
| 105 | .initvals = dir825b1_rtl8366s_initvals, |
| 106 | }; |
| 107 | |
| 108 | static struct platform_device dir825b1_rtl8366s_device = { |
| 109 | .name = RTL8366S_DRIVER_NAME, |
| 110 | .id = -1, |
| 111 | .dev = { |
| 112 | .platform_data = &dir825b1_rtl8366s_data, |
| 113 | } |
| 114 | }; |
| 115 | |
| 116 | static void dir825b1_read_ascii_mac(u8 *dest, u8 *src) |
| 117 | { |
| 118 | int ret; |
| 119 | |
| 120 | ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", |
| 121 | &dest[0], &dest[1], &dest[2], |
| 122 | &dest[3], &dest[4], &dest[5]); |
| 123 | |
| 124 | if (ret != ETH_ALEN) |
| 125 | memset(dest, 0, ETH_ALEN); |
| 126 | } |
| 127 | |
| 128 | static bool __init dir825b1_is_caldata_valid(u8 *p) |
| 129 | { |
| 130 | u16 *magic0, *magic1; |
| 131 | |
| 132 | magic0 = (u16 *)(p + DIR825B1_CAL0_OFFSET); |
| 133 | magic1 = (u16 *)(p + DIR825B1_CAL1_OFFSET); |
| 134 | |
| 135 | return (*magic0 == 0xa55a && *magic1 == 0xa55a); |
| 136 | } |
| 137 | |
| 138 | static void __init dir825b1_wlan_init(void) |
| 139 | { |
| 140 | u8 *caldata; |
| 141 | u8 mac1[ETH_ALEN], mac2[ETH_ALEN]; |
| 142 | |
| 143 | caldata = (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0); |
| 144 | if (!dir825b1_is_caldata_valid(caldata)) { |
| 145 | caldata = (u8 *)KSEG1ADDR(DIR825B1_CAL_LOCATION_1); |
| 146 | if (!dir825b1_is_caldata_valid(caldata)) { |
| 147 | pr_err("no calibration data found\n"); |
| 148 | return; |
| 149 | } |
| 150 | } |
| 151 | |
| 152 | dir825b1_read_ascii_mac(mac1, caldata + DIR825B1_MAC0_OFFSET); |
| 153 | dir825b1_read_ascii_mac(mac2, caldata + DIR825B1_MAC1_OFFSET); |
| 154 | |
| 155 | ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2); |
| 156 | ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3); |
| 157 | |
| 158 | ap9x_pci_setup_wmac_led_pin(0, 5); |
| 159 | ap9x_pci_setup_wmac_led_pin(1, 5); |
| 160 | |
| 161 | ap94_pci_init(caldata + DIR825B1_CAL0_OFFSET, mac1, |
| 162 | caldata + DIR825B1_CAL1_OFFSET, mac2); |
| 163 | } |
| 164 | |
| 165 | static void __init dir825b1_setup(void) |
| 166 | { |
| 167 | dir825b1_wlan_init(); |
| 168 | |
| 169 | ath79_register_mdio(0, 0x0); |
| 170 | |
| 171 | ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; |
| 172 | ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; |
| 173 | ath79_eth0_data.speed = SPEED_1000; |
| 174 | ath79_eth0_data.duplex = DUPLEX_FULL; |
| 175 | ath79_eth0_pll_data.pll_1000 = 0x11110000; |
| 176 | |
| 177 | ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; |
| 178 | ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; |
| 179 | ath79_eth1_data.phy_mask = 0x10; |
| 180 | ath79_eth1_pll_data.pll_1000 = 0x11110000; |
| 181 | |
| 182 | ath79_register_eth(0); |
| 183 | ath79_register_eth(1); |
| 184 | |
| 185 | ath79_register_m25p80(NULL); |
| 186 | |
| 187 | ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio), |
| 188 | dir825b1_leds_gpio); |
| 189 | |
| 190 | ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL, |
| 191 | ARRAY_SIZE(dir825b1_gpio_keys), |
| 192 | dir825b1_gpio_keys); |
| 193 | |
| 194 | ath79_register_usb(); |
| 195 | |
| 196 | platform_device_register(&dir825b1_rtl8366s_device); |
| 197 | } |
| 198 | |
| 199 | MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1", |
| 200 | dir825b1_setup); |
| 201 | |
