Root/target/linux/atheros/patches-3.3/100-board.patch

1--- a/arch/mips/Kconfig
2+++ b/arch/mips/Kconfig
3@@ -120,6 +120,19 @@ config BCM63XX
4     help
5      Support for BCM63XX based boards
6 
7+config ATHEROS_AR231X
8+ bool "Atheros 231x/531x SoC support"
9+ select CEVT_R4K
10+ select CSRC_R4K
11+ select DMA_NONCOHERENT
12+ select IRQ_CPU
13+ select SYS_HAS_CPU_MIPS32_R1
14+ select SYS_SUPPORTS_BIG_ENDIAN
15+ select SYS_SUPPORTS_32BIT_KERNEL
16+ select ARCH_REQUIRE_GPIOLIB
17+ help
18+ Support for AR231x and AR531x based boards
19+
20 config MIPS_COBALT
21     bool "Cobalt Server"
22     select CEVT_R4K
23@@ -813,6 +826,7 @@ config NLM_XLP_BOARD
24 
25 endchoice
26 
27+source "arch/mips/ar231x/Kconfig"
28 source "arch/mips/alchemy/Kconfig"
29 source "arch/mips/ath79/Kconfig"
30 source "arch/mips/bcm47xx/Kconfig"
31--- a/arch/mips/Kbuild.platforms
32+++ b/arch/mips/Kbuild.platforms
33@@ -6,6 +6,7 @@ platforms += ath79
34 platforms += bcm47xx
35 platforms += bcm63xx
36 platforms += cavium-octeon
37+platforms += ar231x
38 platforms += cobalt
39 platforms += dec
40 platforms += emma
41--- /dev/null
42+++ b/arch/mips/ar231x/Platform
43@@ -0,0 +1,6 @@
44+#
45+# Atheros AR5312/AR2312 WiSoC
46+#
47+platform-$(CONFIG_ATHEROS_AR231X) += ar231x/
48+cflags-$(CONFIG_ATHEROS_AR231X) += -I$(srctree)/arch/mips/include/asm/mach-ar231x
49+load-$(CONFIG_ATHEROS_AR231X) += 0xffffffff80041000
50--- /dev/null
51+++ b/arch/mips/ar231x/Kconfig
52@@ -0,0 +1,16 @@
53+config ATHEROS_AR5312
54+ bool "Atheros 5312/2312+ support"
55+ depends on ATHEROS_AR231X
56+ default y
57+
58+config ATHEROS_AR2315
59+ bool "Atheros 2315+ support"
60+ depends on ATHEROS_AR231X
61+ select DMA_NONCOHERENT
62+ select CEVT_R4K
63+ select CSRC_R4K
64+ select IRQ_CPU
65+ select SYS_HAS_CPU_MIPS32_R1
66+ select SYS_SUPPORTS_32BIT_KERNEL
67+ select SYS_SUPPORTS_BIG_ENDIAN
68+ default y
69--- /dev/null
70+++ b/arch/mips/ar231x/Makefile
71@@ -0,0 +1,13 @@
72+#
73+# This file is subject to the terms and conditions of the GNU General Public
74+# License. See the file "COPYING" in the main directory of this archive
75+# for more details.
76+#
77+# Copyright (C) 2006 FON Technology, SL.
78+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
79+# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
80+#
81+
82+obj-y += board.o prom.o devices.o
83+obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
84+obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
85--- /dev/null
86+++ b/arch/mips/ar231x/board.c
87@@ -0,0 +1,259 @@
88+/*
89+ * This file is subject to the terms and conditions of the GNU General Public
90+ * License. See the file "COPYING" in the main directory of this archive
91+ * for more details.
92+ *
93+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
94+ * Copyright (C) 2006 FON Technology, SL.
95+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
96+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
97+ */
98+
99+#include <generated/autoconf.h>
100+#include <linux/init.h>
101+#include <linux/module.h>
102+#include <linux/types.h>
103+#include <linux/string.h>
104+#include <linux/platform_device.h>
105+#include <linux/kernel.h>
106+#include <linux/random.h>
107+#include <linux/etherdevice.h>
108+#include <linux/irq.h>
109+#include <asm/irq_cpu.h>
110+#include <asm/reboot.h>
111+#include <asm/io.h>
112+
113+#include <ar231x_platform.h>
114+#include "devices.h"
115+#include "ar5312.h"
116+#include "ar2315.h"
117+
118+void (*ar231x_irq_dispatch)(void);
119+
120+static inline bool
121+check_radio_magic(u8 *addr)
122+{
123+ addr += 0x7a; /* offset for flash magic */
124+ if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
125+ return 1;
126+ }
127+ return 0;
128+}
129+
130+static inline bool
131+check_board_data(u8 *flash_limit, u8 *addr, bool broken)
132+{
133+ /* config magic found */
134+ if (*((u32 *)addr) == AR531X_BD_MAGIC)
135+ return 1;
136+
137+ if (!broken)
138+ return 0;
139+
140+ if (check_radio_magic(addr + 0xf8))
141+ ar231x_board.radio = addr + 0xf8;
142+ if ((addr < flash_limit + 0x10000) &&
143+ check_radio_magic(addr + 0x10000))
144+ ar231x_board.radio = addr + 0x10000;
145+
146+ if (ar231x_board.radio) {
147+ /* broken board data detected, use radio data to find the offset,
148+ * user will fix this */
149+ return 1;
150+ }
151+ return 0;
152+}
153+
154+static u8 *
155+find_board_config(u8 *flash_limit, bool broken)
156+{
157+ u8 *addr;
158+ int found = 0;
159+
160+ for (addr = flash_limit - 0x1000;
161+ addr >= flash_limit - 0x30000;
162+ addr -= 0x1000) {
163+
164+ if (check_board_data(flash_limit, addr, broken)) {
165+ found = 1;
166+ break;
167+ }
168+ }
169+
170+ if (!found)
171+ addr = NULL;
172+
173+ return addr;
174+}
175+
176+static u8 *
177+find_radio_config(u8 *flash_limit, u8 *board_config)
178+{
179+ int found;
180+ u8 *radio_config;
181+
182+ /*
183+ * Now find the start of Radio Configuration data, using heuristics:
184+ * Search forward from Board Configuration data by 0x1000 bytes
185+ * at a time until we find non-0xffffffff.
186+ */
187+ found = 0;
188+ for (radio_config = board_config + 0x1000;
189+ (radio_config < flash_limit);
190+ radio_config += 0x1000) {
191+ if ((*(u32 *)radio_config != 0xffffffff) &&
192+ check_radio_magic(radio_config)) {
193+ found = 1;
194+ break;
195+ }
196+ }
197+
198+ /* AR2316 relocates radio config to new location */
199+ if (!found) {
200+ for (radio_config = board_config + 0xf8;
201+ (radio_config < flash_limit - 0x1000 + 0xf8);
202+ radio_config += 0x1000) {
203+ if ((*(u32 *)radio_config != 0xffffffff) &&
204+ check_radio_magic(radio_config)) {
205+ found = 1;
206+ break;
207+ }
208+ }
209+ }
210+
211+ if (!found) {
212+ printk("Could not find Radio Configuration data\n");
213+ radio_config = 0;
214+ }
215+
216+ return (u8 *) radio_config;
217+}
218+
219+int __init
220+ar231x_find_config(u8 *flash_limit)
221+{
222+ struct ar231x_boarddata *config;
223+ unsigned int rcfg_size;
224+ int broken_boarddata = 0;
225+ u8 *bcfg, *rcfg;
226+ u8 *board_data;
227+ u8 *radio_data;
228+ u8 *mac_addr;
229+ u32 offset;
230+
231+ ar231x_board.config = NULL;
232+ ar231x_board.radio = NULL;
233+ /* Copy the board and radio data to RAM, because accessing the mapped
234+ * memory of the flash directly after booting is not safe */
235+
236+ /* Try to find valid board and radio data */
237+ bcfg = find_board_config(flash_limit, false);
238+
239+ /* If that fails, try to at least find valid radio data */
240+ if (!bcfg) {
241+ bcfg = find_board_config(flash_limit, true);
242+ broken_boarddata = 1;
243+ }
244+
245+ if (!bcfg) {
246+ printk(KERN_WARNING "WARNING: No board configuration data found!\n");
247+ return -ENODEV;
248+ }
249+
250+ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
251+ ar231x_board.config = (struct ar231x_boarddata *) board_data;
252+ memcpy(board_data, bcfg, 0x100);
253+ if (broken_boarddata) {
254+ printk(KERN_WARNING "WARNING: broken board data detected\n");
255+ config = ar231x_board.config;
256+ if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
257+ printk(KERN_INFO "Fixing up empty mac addresses\n");
258+ config->resetConfigGpio = 0xffff;
259+ config->sysLedGpio = 0xffff;
260+ random_ether_addr(config->wlan0_mac);
261+ config->wlan0_mac[0] &= ~0x06;
262+ random_ether_addr(config->enet0_mac);
263+ random_ether_addr(config->enet1_mac);
264+ }
265+ }
266+
267+
268+ /* Radio config starts 0x100 bytes after board config, regardless
269+ * of what the physical layout on the flash chip looks like */
270+
271+ if (ar231x_board.radio)
272+ rcfg = (u8 *) ar231x_board.radio;
273+ else
274+ rcfg = find_radio_config(flash_limit, bcfg);
275+
276+ if (!rcfg)
277+ return -ENODEV;
278+
279+ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
280+ ar231x_board.radio = radio_data;
281+ offset = radio_data - board_data;
282+ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset);
283+ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
284+ memcpy(radio_data, rcfg, rcfg_size);
285+
286+ mac_addr = &radio_data[0x1d * 2];
287+ if (is_broadcast_ether_addr(mac_addr)) {
288+ printk(KERN_INFO "Radio MAC is blank; using board-data\n");
289+ memcpy(mac_addr, ar231x_board.config->wlan0_mac, ETH_ALEN);
290+ }
291+
292+ return 0;
293+}
294+
295+static void
296+ar231x_halt(void)
297+{
298+ local_irq_disable();
299+ while (1);
300+}
301+
302+void __init
303+plat_mem_setup(void)
304+{
305+ _machine_halt = ar231x_halt;
306+ pm_power_off = ar231x_halt;
307+
308+ ar5312_plat_setup();
309+ ar2315_plat_setup();
310+
311+ /* Disable data watchpoints */
312+ write_c0_watchlo0(0);
313+}
314+
315+
316+asmlinkage void
317+plat_irq_dispatch(void)
318+{
319+ ar231x_irq_dispatch();
320+}
321+
322+void __init
323+plat_time_init(void)
324+{
325+ ar5312_time_init();
326+ ar2315_time_init();
327+}
328+
329+unsigned int __cpuinit
330+get_c0_compare_int(void)
331+{
332+ return CP0_LEGACY_COMPARE_IRQ;
333+}
334+
335+void __init
336+arch_init_irq(void)
337+{
338+ clear_c0_status(ST0_IM);
339+ mips_cpu_irq_init();
340+
341+ /* Initialize interrupt controllers */
342+ ar5312_irq_init();
343+ ar2315_irq_init();
344+}
345+
346+
347--- /dev/null
348+++ b/arch/mips/ar231x/prom.c
349@@ -0,0 +1,37 @@
350+/*
351+ * This file is subject to the terms and conditions of the GNU General Public
352+ * License. See the file "COPYING" in the main directory of this archive
353+ * for more details.
354+ *
355+ * Copyright MontaVista Software Inc
356+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
357+ * Copyright (C) 2006 FON Technology, SL.
358+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
359+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
360+ */
361+
362+/*
363+ * Prom setup file for ar531x
364+ */
365+
366+#include <linux/init.h>
367+#include <generated/autoconf.h>
368+#include <linux/kernel.h>
369+#include <linux/string.h>
370+#include <linux/mm.h>
371+#include <linux/bootmem.h>
372+
373+#include <asm/bootinfo.h>
374+#include <asm/addrspace.h>
375+#include "ar5312.h"
376+#include "ar2315.h"
377+
378+void __init prom_init(void)
379+{
380+ ar5312_prom_init();
381+ ar2315_prom_init();
382+}
383+
384+void __init prom_free_prom_memory(void)
385+{
386+}
387--- /dev/null
388+++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
389@@ -0,0 +1,83 @@
390+#ifndef __AR531X_PLATFORM_H
391+#define __AR531X_PLATFORM_H
392+
393+/*
394+ * This is board-specific data that is stored in a "fixed" location in flash.
395+ * It is shared across operating systems, so it should not be changed lightly.
396+ * The main reason we need it is in order to extract the ethernet MAC
397+ * address(es).
398+ */
399+struct ar231x_boarddata {
400+ u32 magic; /* board data is valid */
401+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
402+ u16 cksum; /* checksum (starting with BD_REV 2) */
403+ u16 rev; /* revision of this struct */
404+#define BD_REV 4
405+ char boardName[64]; /* Name of board */
406+ u16 major; /* Board major number */
407+ u16 minor; /* Board minor number */
408+ u32 flags; /* Board configuration */
409+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
410+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
411+#define BD_UART1 0x00000004 /* UART1 is stuffed */
412+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
413+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
414+#define BD_SYSLED 0x00000020 /* System LED stuffed */
415+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
416+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
417+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
418+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
419+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
420+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
421+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
422+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
423+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
424+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
425+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
426+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
427+ u16 resetConfigGpio; /* Reset factory GPIO pin */
428+ u16 sysLedGpio; /* System LED GPIO pin */
429+
430+ u32 cpuFreq; /* CPU core frequency in Hz */
431+ u32 sysFreq; /* System frequency in Hz */
432+ u32 cntFreq; /* Calculated C0_COUNT frequency */
433+
434+ u8 wlan0_mac[6];
435+ u8 enet0_mac[6];
436+ u8 enet1_mac[6];
437+
438+ u16 pciId; /* Pseudo PCIID for common code */
439+ u16 memCap; /* cap bank1 in MB */
440+
441+ /* version 3 */
442+ u8 wlan1_mac[6]; /* (ar5212) */
443+};
444+
445+#define BOARD_CONFIG_BUFSZ 0x1000
446+
447+/*
448+ * Platform device information for the Wireless MAC
449+ */
450+struct ar231x_board_config {
451+ u16 devid;
452+
453+ /* board config data */
454+ struct ar231x_boarddata *config;
455+
456+ /* radio calibration data */
457+ const char *radio;
458+};
459+
460+/*
461+ * Platform device information for the Ethernet MAC
462+ */
463+struct ar231x_eth {
464+ u32 reset_base;
465+ u32 reset_mac;
466+ u32 reset_phy;
467+ u32 phy_base;
468+ struct ar231x_board_config *config;
469+ char *macaddr;
470+};
471+
472+#endif /* __AR531X_PLATFORM_H */
473--- /dev/null
474+++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
475@@ -0,0 +1,84 @@
476+/*
477+ * Atheros SoC specific CPU feature overrides
478+ *
479+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
480+ *
481+ * This file was derived from: include/asm-mips/cpu-features.h
482+ * Copyright (C) 2003, 2004 Ralf Baechle
483+ * Copyright (C) 2004 Maciej W. Rozycki
484+ *
485+ * This program is free software; you can redistribute it and/or modify it
486+ * under the terms of the GNU General Public License version 2 as published
487+ * by the Free Software Foundation.
488+ *
489+ */
490+#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
491+#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
492+
493+/*
494+ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
495+ */
496+#define cpu_has_tlb 1
497+#define cpu_has_4kex 1
498+#define cpu_has_3k_cache 0
499+#define cpu_has_4k_cache 1
500+#define cpu_has_tx39_cache 0
501+#define cpu_has_sb1_cache 0
502+#define cpu_has_fpu 0
503+#define cpu_has_32fpr 0
504+#define cpu_has_counter 1
505+/* #define cpu_has_watch ? */
506+/* #define cpu_has_divec ? */
507+/* #define cpu_has_vce ? */
508+/* #define cpu_has_cache_cdex_p ? */
509+/* #define cpu_has_cache_cdex_s ? */
510+/* #define cpu_has_prefetch ? */
511+/* #define cpu_has_mcheck ? */
512+#define cpu_has_ejtag 1
513+
514+#if !defined(CONFIG_ATHEROS_AR5312)
515+# define cpu_has_llsc 1
516+#else
517+/*
518+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
519+ * ll/sc instructions.
520+ */
521+# define cpu_has_llsc 0
522+#endif
523+
524+#define cpu_has_mips16 0
525+#define cpu_has_mdmx 0
526+#define cpu_has_mips3d 0
527+#define cpu_has_smartmips 0
528+
529+/* #define cpu_has_vtag_icache ? */
530+/* #define cpu_has_dc_aliases ? */
531+/* #define cpu_has_ic_fills_f_dc ? */
532+/* #define cpu_has_pindexed_dcache ? */
533+
534+/* #define cpu_icache_snoops_remote_store ? */
535+
536+#define cpu_has_mips32r1 1
537+
538+#if !defined(CONFIG_ATHEROS_AR5312)
539+# define cpu_has_mips32r2 1
540+#endif
541+
542+#define cpu_has_mips64r1 0
543+#define cpu_has_mips64r2 0
544+
545+#define cpu_has_dsp 0
546+#define cpu_has_mipsmt 0
547+
548+/* #define cpu_has_nofpuex ? */
549+#define cpu_has_64bits 0
550+#define cpu_has_64bit_zero_reg 0
551+#define cpu_has_64bit_gp_regs 0
552+#define cpu_has_64bit_addresses 0
553+
554+/* #define cpu_has_inclusive_pcaches ? */
555+
556+/* #define cpu_dcache_line_size() ? */
557+/* #define cpu_icache_line_size() ? */
558+
559+#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
560--- /dev/null
561+++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h
562@@ -0,0 +1,76 @@
563+/*
564+ * This file is subject to the terms and conditions of the GNU General Public
565+ * License. See the file "COPYING" in the main directory of this archive
566+ * for more details.
567+ *
568+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
569+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
570+ *
571+ */
572+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
573+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
574+
575+#define PCI_DMA_OFFSET 0x20000000
576+
577+#include <linux/device.h>
578+
579+static inline dma_addr_t ar231x_dev_offset(struct device *dev)
580+{
581+#ifdef CONFIG_PCI
582+ extern struct bus_type pci_bus_type;
583+
584+ if (dev && dev->bus == &pci_bus_type)
585+ return PCI_DMA_OFFSET;
586+ else
587+#endif
588+ return 0;
589+}
590+
591+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
592+{
593+ return virt_to_phys(addr) + ar231x_dev_offset(dev);
594+}
595+
596+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
597+{
598+ return page_to_phys(page) + ar231x_dev_offset(dev);
599+}
600+
601+static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
602+ dma_addr_t dma_addr)
603+{
604+ return dma_addr - ar231x_dev_offset(dev);
605+}
606+
607+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
608+ size_t size, enum dma_data_direction direction)
609+{
610+}
611+
612+static inline int plat_dma_supported(struct device *dev, u64 mask)
613+{
614+ return 1;
615+}
616+
617+static inline void plat_extra_sync_for_device(struct device *dev)
618+{
619+ return;
620+}
621+
622+static inline int plat_dma_mapping_error(struct device *dev,
623+ dma_addr_t dma_addr)
624+{
625+ return 0;
626+}
627+
628+static inline int plat_device_is_coherent(struct device *dev)
629+{
630+#ifdef CONFIG_DMA_COHERENT
631+ return 1;
632+#endif
633+#ifdef CONFIG_DMA_NONCOHERENT
634+ return 0;
635+#endif
636+}
637+
638+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
639--- /dev/null
640+++ b/arch/mips/include/asm/mach-ar231x/gpio.h
641@@ -0,0 +1,28 @@
642+#ifndef _ATHEROS_GPIO_H_
643+#define _ATHEROS_GPIO_H_
644+
645+#include <ar231x.h>
646+
647+#define gpio_get_value __gpio_get_value
648+#define gpio_set_value __gpio_set_value
649+#define gpio_cansleep __gpio_cansleep
650+
651+/*
652+ * Wrappers for the generic GPIO layer
653+ */
654+
655+/* not sure if these are used? */
656+
657+/* Returns IRQ to attach for gpio. Unchecked function */
658+static inline int gpio_to_irq(unsigned gpio) {
659+ return AR531X_GPIO_IRQ(gpio);
660+}
661+
662+/* Returns gpio for IRQ attached. Unchecked function */
663+static inline int irq_to_gpio(unsigned irq) {
664+ return (irq - (AR531X_GPIO_IRQ(0)));
665+}
666+
667+#include <asm-generic/gpio.h> /* cansleep wrappers */
668+
669+#endif
670--- /dev/null
671+++ b/arch/mips/include/asm/mach-ar231x/reset.h
672@@ -0,0 +1,6 @@
673+#ifndef __AR531X_RESET_H
674+#define __AR531X_RESET_H
675+
676+void ar531x_disable_reset_button(void);
677+
678+#endif /* __AR531X_RESET_H */
679--- /dev/null
680+++ b/arch/mips/include/asm/mach-ar231x/war.h
681@@ -0,0 +1,25 @@
682+/*
683+ * This file is subject to the terms and conditions of the GNU General Public
684+ * License. See the file "COPYING" in the main directory of this archive
685+ * for more details.
686+ *
687+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
688+ */
689+#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
690+#define __ASM_MIPS_MACH_ATHEROS_WAR_H
691+
692+#define R4600_V1_INDEX_ICACHEOP_WAR 0
693+#define R4600_V1_HIT_CACHEOP_WAR 0
694+#define R4600_V2_HIT_CACHEOP_WAR 0
695+#define R5432_CP0_INTERRUPT_WAR 0
696+#define BCM1250_M3_WAR 0
697+#define SIBYTE_1956_WAR 0
698+#define MIPS4K_ICACHE_REFILL_WAR 0
699+#define MIPS_CACHE_SYNC_WAR 0
700+#define TX49XX_ICACHE_INDEX_INV_WAR 0
701+#define RM9000_CDEX_SMP_WAR 0
702+#define ICACHE_REFILLS_WORKAROUND_WAR 0
703+#define R10000_LLSC_WAR 0
704+#define MIPS34K_MISSED_ITLB_WAR 0
705+
706+#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
707--- /dev/null
708+++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
709@@ -0,0 +1,580 @@
710+/*
711+ * Register definitions for AR2315+
712+ *
713+ * This file is subject to the terms and conditions of the GNU General Public
714+ * License. See the file "COPYING" in the main directory of this archive
715+ * for more details.
716+ *
717+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
718+ * Copyright (C) 2006 FON Technology, SL.
719+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
720+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
721+ */
722+
723+#ifndef __AR2315_REG_H
724+#define __AR2315_REG_H
725+
726+/*
727+ * IRQs
728+ */
729+#define AR2315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
730+#define AR2315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
731+#define AR2315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
732+#define AR2315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
733+#define AR2315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
734+
735+/*
736+ * Address map
737+ */
738+#define AR2315_SPI_READ 0x08000000 /* SPI FLASH */
739+#define AR2315_WLAN0 0x10000000 /* Wireless MMR */
740+#define AR2315_PCI 0x10100000 /* PCI MMR */
741+#define AR2315_SDRAMCTL 0x10300000 /* SDRAM MMR */
742+#define AR2315_LOCAL 0x10400000 /* LOCAL BUS MMR */
743+#define AR2315_ENET0 0x10500000 /* ETHERNET MMR */
744+#define AR2315_DSLBASE 0x11000000 /* RESET CONTROL MMR */
745+#define AR2315_UART0 0x11100003 /* UART MMR */
746+#define AR2315_SPI 0x11300000 /* SPI FLASH MMR */
747+#define AR2315_PCIEXT 0x80000000 /* pci external */
748+
749+/*
750+ * Reset Register
751+ */
752+#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000)
753+
754+#define AR2315_RESET_COLD_AHB 0x00000001
755+#define AR2315_RESET_COLD_APB 0x00000002
756+#define AR2315_RESET_COLD_CPU 0x00000004
757+#define AR2315_RESET_COLD_CPUWARM 0x00000008
758+#define AR2315_RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
759+#define AR2317_RESET_SYSTEM 0x00000010
760+
761+
762+#define AR2315_RESET (AR2315_DSLBASE + 0x0004)
763+
764+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
765+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
766+#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
767+#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
768+#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */
769+#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */
770+#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
771+#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI interface */
772+#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */
773+#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
774+#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
775+#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
776+
777+/*
778+ * AHB master arbitration control
779+ */
780+#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008)
781+
782+#define AR2315_ARB_CPU 0x00000001 /* CPU, default */
783+#define AR2315_ARB_WLAN 0x00000002 /* WLAN */
784+#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
785+#define AR2315_ARB_LOCAL 0x00000008 /* LOCAL */
786+#define AR2315_ARB_PCI 0x00000010 /* PCI */
787+#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */
788+#define AR2315_ARB_RETRY 0x00000100 /* retry policy, debug only */
789+
790+/*
791+ * Config Register
792+ */
793+#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c)
794+
795+#define AR2315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
796+#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
797+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
798+#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */
799+#define AR2315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
800+#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
801+#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
802+
803+#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
804+#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */
805+#define AR2315_CONFIG_PCIAHB 0x00000800
806+#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
807+#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */
808+#define AR2315_CONFIG_CPU_DRAM 0x00010000
809+#define AR2315_CONFIG_CPU_PCI 0x00020000
810+#define AR2315_CONFIG_CPU_MMR 0x00040000
811+#define AR2315_CONFIG_BIG 0x00000400
812+
813+
814+/*
815+ * NMI control
816+ */
817+#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010)
818+
819+#define AR2315_NMI_EN 1
820+
821+/*
822+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
823+ */
824+#define AR2315_SREV (AR2315_DSLBASE + 0x0014)
825+
826+#define AR2315_REV_MAJ 0x00f0
827+#define AR2315_REV_MAJ_S 4
828+#define AR2315_REV_MIN 0x000f
829+#define AR2315_REV_MIN_S 0
830+#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN)
831+
832+/*
833+ * Interface Enable
834+ */
835+#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018)
836+
837+#define AR2315_IF_MASK 0x00000007
838+#define AR2315_IF_DISABLED 0
839+#define AR2315_IF_PCI 1
840+#define AR2315_IF_TS_LOCAL 2
841+#define AR2315_IF_ALL 3 /* only for emulation with separate pins */
842+#define AR2315_IF_LOCAL_HOST 0x00000008
843+#define AR2315_IF_PCI_HOST 0x00000010
844+#define AR2315_IF_PCI_INTR 0x00000020
845+#define AR2315_IF_PCI_CLK_MASK 0x00030000
846+#define AR2315_IF_PCI_CLK_INPUT 0
847+#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
848+#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
849+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
850+#define AR2315_IF_PCI_CLK_SHIFT 16
851+
852+/*
853+ * APB Interrupt control
854+ */
855+
856+#define AR2315_ISR (AR2315_DSLBASE + 0x0020)
857+#define AR2315_IMR (AR2315_DSLBASE + 0x0024)
858+#define AR2315_GISR (AR2315_DSLBASE + 0x0028)
859+
860+#define AR2315_ISR_UART0 0x0001 /* high speed UART */
861+#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */
862+#define AR2315_ISR_SPI 0x0004 /* SPI bus */
863+#define AR2315_ISR_AHB 0x0008 /* AHB error */
864+#define AR2315_ISR_APB 0x0010 /* APB error */
865+#define AR2315_ISR_TIMER 0x0020 /* timer */
866+#define AR2315_ISR_GPIO 0x0040 /* GPIO */
867+#define AR2315_ISR_WD 0x0080 /* watchdog */
868+#define AR2315_ISR_IR_RSVD 0x0100 /* IR */
869+
870+#define AR2315_GISR_MISC 0x0001
871+#define AR2315_GISR_WLAN0 0x0002
872+#define AR2315_GISR_MPEGTS_RSVD 0x0004
873+#define AR2315_GISR_LOCALPCI 0x0008
874+#define AR2315_GISR_WMACPOLL 0x0010
875+#define AR2315_GISR_TIMER 0x0020
876+#define AR2315_GISR_ETHERNET 0x0040
877+
878+/*
879+ * Interrupt routing from IO to the processor IP bits
880+ * Define our inter mask and level
881+ */
882+#define AR2315_INTR_MISCIO SR_IBIT3
883+#define AR2315_INTR_WLAN0 SR_IBIT4
884+#define AR2315_INTR_ENET0 SR_IBIT5
885+#define AR2315_INTR_LOCALPCI SR_IBIT6
886+#define AR2315_INTR_WMACPOLL SR_IBIT7
887+#define AR2315_INTR_COMPARE SR_IBIT8
888+
889+/*
890+ * Timers
891+ */
892+#define AR2315_TIMER (AR2315_DSLBASE + 0x0030)
893+#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034)
894+#define AR2315_WD (AR2315_DSLBASE + 0x0038)
895+#define AR2315_WDC (AR2315_DSLBASE + 0x003c)
896+
897+#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000
898+#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */
899+#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */
900+
901+/*
902+ * CPU Performance Counters
903+ */
904+#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048)
905+#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c)
906+
907+#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */
908+#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */
909+#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */
910+#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */
911+#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */
912+#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
913+#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
914+
915+#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */
916+#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */
917+#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
918+#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
919+#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */
920+#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */
921+#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */
922+
923+/*
924+ * AHB Error Reporting.
925+ */
926+#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */
927+#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */
928+#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */
929+#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */
930+#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */
931+
932+#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
933+ /* write 1 to clear all bits in ERR0 */
934+#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
935+#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
936+
937+#define AR2315_PROCERR_HMAST 0x0000000f
938+#define AR2315_PROCERR_HMAST_DFLT 0
939+#define AR2315_PROCERR_HMAST_WMAC 1
940+#define AR2315_PROCERR_HMAST_ENET 2
941+#define AR2315_PROCERR_HMAST_PCIENDPT 3
942+#define AR2315_PROCERR_HMAST_LOCAL 4
943+#define AR2315_PROCERR_HMAST_CPU 5
944+#define AR2315_PROCERR_HMAST_PCITGT 6
945+
946+#define AR2315_PROCERR_HMAST_S 0
947+#define AR2315_PROCERR_HWRITE 0x00000010
948+#define AR2315_PROCERR_HSIZE 0x00000060
949+#define AR2315_PROCERR_HSIZE_S 5
950+#define AR2315_PROCERR_HTRANS 0x00000180
951+#define AR2315_PROCERR_HTRANS_S 7
952+#define AR2315_PROCERR_HBURST 0x00000e00
953+#define AR2315_PROCERR_HBURST_S 9
954+
955+/*
956+ * Clock Control
957+ */
958+#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064)
959+#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068)
960+#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c)
961+#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070)
962+#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074)
963+#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080)
964+#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084)
965+
966+/* PLLc Control fields */
967+#define PLLC_REF_DIV_M 0x00000003
968+#define PLLC_REF_DIV_S 0
969+#define PLLC_FDBACK_DIV_M 0x0000007C
970+#define PLLC_FDBACK_DIV_S 2
971+#define PLLC_ADD_FDBACK_DIV_M 0x00000080
972+#define PLLC_ADD_FDBACK_DIV_S 7
973+#define PLLC_CLKC_DIV_M 0x0001c000
974+#define PLLC_CLKC_DIV_S 14
975+#define PLLC_CLKM_DIV_M 0x00700000
976+#define PLLC_CLKM_DIV_S 20
977+
978+/* CPU CLK Control fields */
979+#define CPUCLK_CLK_SEL_M 0x00000003
980+#define CPUCLK_CLK_SEL_S 0
981+#define CPUCLK_CLK_DIV_M 0x0000000c
982+#define CPUCLK_CLK_DIV_S 2
983+
984+/* AMBA CLK Control fields */
985+#define AMBACLK_CLK_SEL_M 0x00000003
986+#define AMBACLK_CLK_SEL_S 0
987+#define AMBACLK_CLK_DIV_M 0x0000000c
988+#define AMBACLK_CLK_DIV_S 2
989+
990+/*
991+ * GPIO
992+ */
993+#define AR2315_GPIO_DI (AR2315_DSLBASE + 0x0088)
994+#define AR2315_GPIO_DO (AR2315_DSLBASE + 0x0090)
995+#define AR2315_GPIO_CR (AR2315_DSLBASE + 0x0098)
996+#define AR2315_GPIO_INT (AR2315_DSLBASE + 0x00a0)
997+
998+#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
999+#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */
1000+#define AR2315_GPIO_CR_I(x) (0) /* input */
1001+
1002+#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */
1003+#define AR2315_GPIO_INT_M (0x3F) /* mask for int */
1004+#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */
1005+#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */
1006+
1007+#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */
1008+#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */
1009+#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */
1010+#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */
1011+#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */
1012+
1013+#define AR2315_RESET_GPIO 5
1014+#define AR2315_NUM_GPIO 22
1015+
1016+/*
1017+ * PCI Clock Control
1018+ */
1019+#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4)
1020+
1021+#define AR2315_PCICLK_INPUT_M 0x3
1022+#define AR2315_PCICLK_INPUT_S 0
1023+
1024+#define AR2315_PCICLK_PLLC_CLKM 0
1025+#define AR2315_PCICLK_PLLC_CLKM1 1
1026+#define AR2315_PCICLK_PLLC_CLKC 2
1027+#define AR2315_PCICLK_REF_CLK 3
1028+
1029+#define AR2315_PCICLK_DIV_M 0xc
1030+#define AR2315_PCICLK_DIV_S 2
1031+
1032+#define AR2315_PCICLK_IN_FREQ 0
1033+#define AR2315_PCICLK_IN_FREQ_DIV_6 1
1034+#define AR2315_PCICLK_IN_FREQ_DIV_8 2
1035+#define AR2315_PCICLK_IN_FREQ_DIV_10 3
1036+
1037+/*
1038+ * Observation Control Register
1039+ */
1040+#define AR2315_OCR (AR2315_DSLBASE + 0x00b0)
1041+#define OCR_GPIO0_IRIN 0x0040
1042+#define OCR_GPIO1_IROUT 0x0080
1043+#define OCR_GPIO3_RXCLR 0x0200
1044+
1045+/*
1046+ * General Clock Control
1047+ */
1048+
1049+#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4)
1050+#define MISCCLK_PLLBYPASS_EN 0x00000001
1051+#define MISCCLK_PROCREFCLK 0x00000002
1052+
1053+/*
1054+ * SDRAM Controller
1055+ * - No read or write buffers are included.
1056+ */
1057+#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00)
1058+#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c)
1059+#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10)
1060+
1061+#define SDRAM_DATA_WIDTH_M 0x00006000
1062+#define SDRAM_DATA_WIDTH_S 13
1063+
1064+#define SDRAM_COL_WIDTH_M 0x00001E00
1065+#define SDRAM_COL_WIDTH_S 9
1066+
1067+#define SDRAM_ROW_WIDTH_M 0x000001E0
1068+#define SDRAM_ROW_WIDTH_S 5
1069+
1070+#define SDRAM_BANKADDR_BITS_M 0x00000018
1071+#define SDRAM_BANKADDR_BITS_S 3
1072+
1073+/*
1074+ * SPI Flash Interface Registers
1075+ */
1076+
1077+#define AR2315_SPI_CTL (AR2315_SPI + 0x00)
1078+#define AR2315_SPI_OPCODE (AR2315_SPI + 0x04)
1079+#define AR2315_SPI_DATA (AR2315_SPI + 0x08)
1080+
1081+#define SPI_CTL_START 0x00000100
1082+#define SPI_CTL_BUSY 0x00010000
1083+#define SPI_CTL_TXCNT_MASK 0x0000000f
1084+#define SPI_CTL_RXCNT_MASK 0x000000f0
1085+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
1086+#define SPI_CTL_SIZE_MASK 0x00060000
1087+
1088+#define SPI_CTL_CLK_SEL_MASK 0x03000000
1089+#define SPI_OPCODE_MASK 0x000000ff
1090+
1091+/*
1092+ * PCI Bus Interface Registers
1093+ */
1094+#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008)
1095+#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
1096+
1097+#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c)
1098+#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
1099+#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
1100+#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
1101+#define AR2315_PCIMISC_RST_MODE 0x00000030
1102+#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
1103+#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
1104+#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
1105+#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
1106+#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
1107+#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
1108+#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
1109+#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
1110+
1111+#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010)
1112+
1113+#define AR2315_PCI_UNCACHE_CFG (AR2315_PCI + 0x0014)
1114+
1115+#define AR2315_PCI_IN_EN (AR2315_PCI + 0x0100)
1116+#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */
1117+#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */
1118+#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */
1119+#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */
1120+
1121+#define AR2315_PCI_IN_DIS (AR2315_PCI + 0x0104)
1122+#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
1123+#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
1124+#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
1125+#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
1126+
1127+#define AR2315_PCI_IN_PTR (AR2315_PCI + 0x0200)
1128+
1129+#define AR2315_PCI_OUT_EN (AR2315_PCI + 0x0400)
1130+#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
1131+
1132+#define AR2315_PCI_OUT_DIS (AR2315_PCI + 0x0404)
1133+#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
1134+
1135+#define AR2315_PCI_OUT_PTR (AR2315_PCI + 0x0408)
1136+
1137+#define AR2315_PCI_INT_STATUS (AR2315_PCI + 0x0500) /* write one to clr */
1138+#define AR2315_PCI_TXINT 0x00000001 /* Desc In Completed */
1139+#define AR2315_PCI_TXOK 0x00000002 /* Desc In OK */
1140+#define AR2315_PCI_TXERR 0x00000004 /* Desc In ERR */
1141+#define AR2315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
1142+#define AR2315_PCI_RXINT 0x00000010 /* Desc Out Completed */
1143+#define AR2315_PCI_RXOK 0x00000020 /* Desc Out OK */
1144+#define AR2315_PCI_RXERR 0x00000040 /* Desc Out ERR */
1145+#define AR2315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
1146+#define AR2315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
1147+#define AR2315_PCI_MASK 0x0000FFFF /* Desc Mask */
1148+#define AR2315_PCI_EXT_INT 0x02000000
1149+#define AR2315_PCI_ABORT_INT 0x04000000
1150+
1151+#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */
1152+
1153+#define AR2315_PCI_INTEN_REG (AR2315_PCI + 0x0508)
1154+#define AR2315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
1155+#define AR2315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
1156+
1157+#define AR2315_PCI_HOST_IN_EN (AR2315_PCI + 0x0800)
1158+#define AR2315_PCI_HOST_IN_DIS (AR2315_PCI + 0x0804)
1159+#define AR2315_PCI_HOST_IN_PTR (AR2315_PCI + 0x0810)
1160+#define AR2315_PCI_HOST_OUT_EN (AR2315_PCI + 0x0900)
1161+#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904)
1162+#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908)
1163+
1164+
1165+/*
1166+ * Local Bus Interface Registers
1167+ */
1168+#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000)
1169+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
1170+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
1171+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
1172+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
1173+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
1174+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
1175+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
1176+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
1177+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
1178+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
1179+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
1180+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
1181+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
1182+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
1183+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
1184+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
1185+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
1186+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
1187+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
1188+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
1189+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
1190+#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
1191+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
1192+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
1193+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
1194+
1195+#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004)
1196+#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */
1197+
1198+#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008)
1199+#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
1200+
1201+#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C)
1202+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
1203+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
1204+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
1205+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
1206+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
1207+#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80
1208+#define AR2315_LBM_TIMEOUT_SHFT 7
1209+#define AR2315_LBM_PORTMUX 0x07000000
1210+
1211+
1212+#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010)
1213+
1214+#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100)
1215+#define AR2315_LB_TXEN_0 0x01
1216+#define AR2315_LB_TXEN_1 0x02
1217+#define AR2315_LB_TXEN_2 0x04
1218+#define AR2315_LB_TXEN_3 0x08
1219+
1220+#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104)
1221+#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200)
1222+
1223+#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400)
1224+#define AR2315_LB_RXEN 0x01
1225+
1226+#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404)
1227+#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408)
1228+
1229+#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500)
1230+#define AR2315_INT_TX_DESC 0x0001
1231+#define AR2315_INT_TX_OK 0x0002
1232+#define AR2315_INT_TX_ERR 0x0004
1233+#define AR2315_INT_TX_EOF 0x0008
1234+#define AR2315_INT_RX_DESC 0x0010
1235+#define AR2315_INT_RX_OK 0x0020
1236+#define AR2315_INT_RX_ERR 0x0040
1237+#define AR2315_INT_RX_EOF 0x0080
1238+#define AR2315_INT_TX_TRUNC 0x0100
1239+#define AR2315_INT_TX_STARVE 0x0200
1240+#define AR2315_INT_LB_TIMEOUT 0x0400
1241+#define AR2315_INT_LB_ERR 0x0800
1242+#define AR2315_INT_MBOX_WR 0x1000
1243+#define AR2315_INT_MBOX_RD 0x2000
1244+
1245+/* Bit definitions for INT MASK are the same as INT_STATUS */
1246+#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504)
1247+
1248+#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508)
1249+#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600)
1250+
1251+/*
1252+ * IR Interface Registers
1253+ */
1254+#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000)
1255+
1256+#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */
1257+
1258+#define AR2315_IR_CONTROL (AR2315_IR + 0x0800)
1259+#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */
1260+#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */
1261+#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
1262+#define AR2315_IRCTL_SAMPLECLK_SHFT 1
1263+#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
1264+#define AR2315_IRCTL_OUTPUTCLK_SHFT 14
1265+
1266+#define AR2315_IR_STATUS (AR2315_IR + 0x0804)
1267+#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */
1268+#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */
1269+
1270+#define AR2315_IR_CONFIG (AR2315_IR + 0x0808)
1271+#define AR2315_IRCFG_INVIN 0x00000001 /* invert input polarity */
1272+#define AR2315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
1273+#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
1274+#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
1275+#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
1276+#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
1277+#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
1278+#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
1279+#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
1280+
1281+#define HOST_PCI_DEV_ID 3
1282+#define HOST_PCI_MBAR0 0x10000000
1283+#define HOST_PCI_MBAR1 0x20000000
1284+#define HOST_PCI_MBAR2 0x30000000
1285+
1286+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
1287+#define PCI_DEVICE_MEM_SPACE 0x800000
1288+
1289+#endif /* __AR2315_REG_H */
1290--- /dev/null
1291+++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
1292@@ -0,0 +1,232 @@
1293+/*
1294+ * This file is subject to the terms and conditions of the GNU General Public
1295+ * License. See the file "COPYING" in the main directory of this archive
1296+ * for more details.
1297+ *
1298+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
1299+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
1300+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
1301+ */
1302+
1303+#ifndef AR5312_H
1304+#define AR5312_H
1305+
1306+#include <asm/addrspace.h>
1307+
1308+/*
1309+ * IRQs
1310+ */
1311+
1312+#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
1313+#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
1314+#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
1315+#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
1316+#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
1317+
1318+
1319+/* Address Map */
1320+#define AR531X_WLAN0 0x18000000
1321+#define AR531X_WLAN1 0x18500000
1322+#define AR531X_ENET0 0x18100000
1323+#define AR531X_ENET1 0x18200000
1324+#define AR531X_SDRAMCTL 0x18300000
1325+#define AR531X_FLASHCTL 0x18400000
1326+#define AR531X_APBBASE 0x1c000000
1327+#define AR531X_FLASH 0x1e000000
1328+#define AR531X_UART0 0xbc000003 /* UART MMR */
1329+
1330+/*
1331+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
1332+ * should be considered available. The AR5312 supports 2 enet MACS,
1333+ * even though many reference boards only actually use 1 of them
1334+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
1335+ * The AR2312 supports 1 enet MAC.
1336+ */
1337+#define AR531X_NUM_ENET_MAC 2
1338+
1339+/*
1340+ * Need these defines to determine true number of ethernet MACs
1341+ */
1342+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
1343+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
1344+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
1345+
1346+/*
1347+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
1348+ * should be considered available.
1349+ */
1350+#define AR531X_NUM_WMAC 2
1351+
1352+/* Reset/Timer Block Address Map */
1353+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
1354+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
1355+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
1356+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
1357+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
1358+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
1359+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
1360+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
1361+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
1362+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
1363+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
1364+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
1365+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
1366+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
1367+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
1368+
1369+/* AR531X_WD_CTRL register bit field definitions */
1370+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
1371+#define AR531X_WD_CTRL_NMI 0x0001
1372+#define AR531X_WD_CTRL_RESET 0x0002
1373+
1374+/* AR531X_ISR register bit field definitions */
1375+#define AR531X_ISR_NONE 0x0000
1376+#define AR531X_ISR_TIMER 0x0001
1377+#define AR531X_ISR_AHBPROC 0x0002
1378+#define AR531X_ISR_AHBDMA 0x0004
1379+#define AR531X_ISR_GPIO 0x0008
1380+#define AR531X_ISR_UART0 0x0010
1381+#define AR531X_ISR_UART0DMA 0x0020
1382+#define AR531X_ISR_WD 0x0040
1383+#define AR531X_ISR_LOCAL 0x0080
1384+
1385+/* AR531X_RESET register bit field definitions */
1386+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
1387+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
1388+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
1389+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
1390+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
1391+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
1392+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
1393+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
1394+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
1395+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
1396+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
1397+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
1398+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
1399+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
1400+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
1401+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
1402+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
1403+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
1404+
1405+#define AR531X_RESET_WMAC0_BITS \
1406+ AR531X_RESET_WLAN0 |\
1407+ AR531X_RESET_WARM_WLAN0_MAC |\
1408+ AR531X_RESET_WARM_WLAN0_BB
1409+
1410+#define AR531X_RESERT_WMAC1_BITS \
1411+ AR531X_RESET_WLAN1 |\
1412+ AR531X_RESET_WARM_WLAN1_MAC |\
1413+ AR531X_RESET_WARM_WLAN1_BB
1414+
1415+/* AR5312_CLOCKCTL1 register bit field definitions */
1416+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
1417+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
1418+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
1419+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
1420+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
1421+
1422+/* Valid for AR5312 and AR2312 */
1423+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
1424+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
1425+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
1426+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
1427+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
1428+
1429+/* Valid for AR2313 */
1430+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
1431+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
1432+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
1433+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
1434+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
1435+
1436+
1437+/* AR531X_ENABLE register bit field definitions */
1438+#define AR531X_ENABLE_WLAN0 0x0001
1439+#define AR531X_ENABLE_ENET0 0x0002
1440+#define AR531X_ENABLE_ENET1 0x0004
1441+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
1442+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
1443+#define AR531X_ENABLE_WLAN1 \
1444+ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
1445+
1446+/* AR531X_REV register bit field definitions */
1447+#define AR531X_REV_WMAC_MAJ 0xf000
1448+#define AR531X_REV_WMAC_MAJ_S 12
1449+#define AR531X_REV_WMAC_MIN 0x0f00
1450+#define AR531X_REV_WMAC_MIN_S 8
1451+#define AR531X_REV_MAJ 0x00f0
1452+#define AR531X_REV_MAJ_S 4
1453+#define AR531X_REV_MIN 0x000f
1454+#define AR531X_REV_MIN_S 0
1455+#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
1456+
1457+/* Major revision numbers, bits 7..4 of Revision ID register */
1458+#define AR531X_REV_MAJ_AR5312 0x4
1459+#define AR531X_REV_MAJ_AR2313 0x5
1460+
1461+/* Minor revision numbers, bits 3..0 of Revision ID register */
1462+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
1463+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
1464+
1465+/* AR531X_FLASHCTL register bit field definitions */
1466+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
1467+#define FLASHCTL_IDCY_S 0
1468+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
1469+#define FLASHCTL_WST1_S 5
1470+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
1471+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
1472+#define FLASHCTL_WST2_S 11
1473+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
1474+#define FLASHCTL_AC_S 16
1475+#define FLASHCTL_AC_128K 0x00000000
1476+#define FLASHCTL_AC_256K 0x00010000
1477+#define FLASHCTL_AC_512K 0x00020000
1478+#define FLASHCTL_AC_1M 0x00030000
1479+#define FLASHCTL_AC_2M 0x00040000
1480+#define FLASHCTL_AC_4M 0x00050000
1481+#define FLASHCTL_AC_8M 0x00060000
1482+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
1483+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
1484+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
1485+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
1486+#define FLASHCTL_WP 0x04000000 /* Write protect */
1487+#define FLASHCTL_BM 0x08000000 /* Burst mode */
1488+#define FLASHCTL_MW 0x30000000 /* Memory width */
1489+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
1490+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
1491+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
1492+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
1493+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
1494+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
1495+
1496+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
1497+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
1498+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
1499+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
1500+
1501+/* ARM SDRAM Controller -- just enough to determine memory size */
1502+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
1503+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
1504+#define MEM_CFG1_AC0_S 8
1505+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
1506+#define MEM_CFG1_AC1_S 12
1507+
1508+/* GPIO Address Map */
1509+#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
1510+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
1511+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
1512+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
1513+
1514+/* GPIO Control Register bit field definitions */
1515+#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
1516+#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
1517+#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
1518+#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
1519+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
1520+#define AR531X_NUM_GPIO 8
1521+
1522+
1523+#endif
1524+
1525--- /dev/null
1526+++ b/arch/mips/ar231x/ar5312.c
1527@@ -0,0 +1,579 @@
1528+/*
1529+ * This file is subject to the terms and conditions of the GNU General Public
1530+ * License. See the file "COPYING" in the main directory of this archive
1531+ * for more details.
1532+ *
1533+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
1534+ * Copyright (C) 2006 FON Technology, SL.
1535+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
1536+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
1537+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
1538+ */
1539+
1540+/*
1541+ * Platform devices for Atheros SoCs
1542+ */
1543+
1544+#include <generated/autoconf.h>
1545+#include <linux/init.h>
1546+#include <linux/module.h>
1547+#include <linux/types.h>
1548+#include <linux/string.h>
1549+#include <linux/mtd/physmap.h>
1550+#include <linux/platform_device.h>
1551+#include <linux/kernel.h>
1552+#include <linux/reboot.h>
1553+#include <linux/leds.h>
1554+#include <linux/gpio.h>
1555+#include <asm/bootinfo.h>
1556+#include <asm/reboot.h>
1557+#include <asm/time.h>
1558+#include <linux/irq.h>
1559+#include <asm/io.h>
1560+
1561+#include <ar231x_platform.h>
1562+#include <ar5312_regs.h>
1563+#include <ar231x.h>
1564+#include "devices.h"
1565+#include "ar5312.h"
1566+
1567+static void
1568+ar5312_misc_irq_dispatch(void)
1569+{
1570+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR);
1571+
1572+ if (ar231x_misc_intrs & AR531X_ISR_TIMER) {
1573+ do_IRQ(AR531X_MISC_IRQ_TIMER);
1574+ (void)ar231x_read_reg(AR531X_TIMER);
1575+ } else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC)
1576+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
1577+ else if ((ar231x_misc_intrs & AR531X_ISR_UART0))
1578+ do_IRQ(AR531X_MISC_IRQ_UART0);
1579+ else if (ar231x_misc_intrs & AR531X_ISR_WD)
1580+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
1581+ else
1582+ do_IRQ(AR531X_MISC_IRQ_NONE);
1583+}
1584+
1585+static asmlinkage void
1586+ar5312_irq_dispatch(void)
1587+{
1588+ int pending = read_c0_status() & read_c0_cause();
1589+
1590+ if (pending & CAUSEF_IP2)
1591+ do_IRQ(AR5312_IRQ_WLAN0_INTRS);
1592+ else if (pending & CAUSEF_IP3)
1593+ do_IRQ(AR5312_IRQ_ENET0_INTRS);
1594+ else if (pending & CAUSEF_IP4)
1595+ do_IRQ(AR5312_IRQ_ENET1_INTRS);
1596+ else if (pending & CAUSEF_IP5)
1597+ do_IRQ(AR5312_IRQ_WLAN1_INTRS);
1598+ else if (pending & CAUSEF_IP6)
1599+ ar5312_misc_irq_dispatch();
1600+ else if (pending & CAUSEF_IP7)
1601+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
1602+}
1603+
1604+
1605+/* Enable the specified AR531X_MISC_IRQ interrupt */
1606+static void
1607+ar5312_misc_intr_enable(struct irq_data *d)
1608+{
1609+ unsigned int imr;
1610+
1611+ imr = ar231x_read_reg(AR531X_IMR);
1612+ imr |= (1 << (d->irq - AR531X_MISC_IRQ_BASE - 1));
1613+ ar231x_write_reg(AR531X_IMR, imr);
1614+}
1615+
1616+/* Disable the specified AR531X_MISC_IRQ interrupt */
1617+static void
1618+ar5312_misc_intr_disable(struct irq_data *d)
1619+{
1620+ unsigned int imr;
1621+
1622+ imr = ar231x_read_reg(AR531X_IMR);
1623+ imr &= ~(1 << (d->irq - AR531X_MISC_IRQ_BASE - 1));
1624+ ar231x_write_reg(AR531X_IMR, imr);
1625+ ar231x_read_reg(AR531X_IMR); /* flush write buffer */
1626+}
1627+
1628+static struct irq_chip ar5312_misc_intr_controller = {
1629+ .irq_mask = ar5312_misc_intr_disable,
1630+ .irq_unmask = ar5312_misc_intr_enable,
1631+};
1632+
1633+
1634+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
1635+{
1636+ u32 proc1 = ar231x_read_reg(AR531X_PROC1);
1637+ u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */
1638+ u32 dma1 = ar231x_read_reg(AR531X_DMA1);
1639+ u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR); /* clears error state */
1640+
1641+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
1642+ procAddr, proc1, dmaAddr, dma1);
1643+
1644+ machine_restart("AHB error"); /* Catastrophic failure */
1645+ return IRQ_HANDLED;
1646+}
1647+
1648+
1649+static struct irqaction ar5312_ahb_proc_interrupt = {
1650+ .handler = ar5312_ahb_proc_handler,
1651+ .name = "ar5312_ahb_proc_interrupt",
1652+};
1653+
1654+
1655+static struct irqaction cascade = {
1656+ .handler = no_action,
1657+ .name = "cascade",
1658+};
1659+
1660+void __init ar5312_irq_init(void)
1661+{
1662+ int i;
1663+
1664+ if (!is_5312())
1665+ return;
1666+
1667+ ar231x_irq_dispatch = ar5312_irq_dispatch;
1668+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
1669+ int irq = AR531X_MISC_IRQ_BASE + i;
1670+ irq_set_chip_and_handler(irq, &ar5312_misc_intr_controller,
1671+ handle_level_irq);
1672+ }
1673+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
1674+ setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
1675+}
1676+
1677+static u32
1678+ar5312_gpio_set_output(u32 mask, u32 val)
1679+{
1680+ u32 reg;
1681+
1682+ reg = ar231x_read_reg(AR531X_GPIO_CR);
1683+ reg |= mask;
1684+ reg &= ~val;
1685+ ar231x_write_reg(AR531X_GPIO_CR, reg);
1686+ return reg;
1687+}
1688+
1689+static u32
1690+ar5312_gpio_get(u32 valid_mask)
1691+{
1692+ u32 reg;
1693+ reg = ar231x_read_reg(AR531X_GPIO_DI);
1694+ reg &= valid_mask;
1695+ return reg;
1696+}
1697+
1698+static u32
1699+ar5312_gpio_set(u32 mask, u32 value)
1700+{
1701+ u32 reg;
1702+ reg = ar231x_read_reg(AR531X_GPIO_DO);
1703+ reg &= ~mask;
1704+ reg |= value;
1705+ ar231x_write_reg(AR531X_GPIO_DO, reg);
1706+ return reg;
1707+}
1708+
1709+/*
1710+ * gpiolib implementations. Original mask based methods preserved
1711+ */
1712+static int
1713+ar5312_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
1714+{
1715+ struct ar231x_gpio_chip *gpch =
1716+ container_of(chip, struct ar231x_gpio_chip, chip);
1717+ u32 mask = 1 << gpio;
1718+ u32 rett;
1719+ if (!(gpch->valid_mask & mask))
1720+ return 0;
1721+ rett = ar5312_gpio_get(gpch->valid_mask);
1722+ return !!(rett & mask);
1723+}
1724+
1725+static void
1726+ar5312_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
1727+{
1728+ struct ar231x_gpio_chip *gpch =
1729+ container_of(chip, struct ar231x_gpio_chip, chip);
1730+ u32 mask = 1 << gpio;
1731+ if (!(gpch->valid_mask & mask))
1732+ return;
1733+ ar5312_gpio_set(mask, (!!value) * mask);
1734+}
1735+
1736+static int
1737+ar5312_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
1738+{
1739+ struct ar231x_gpio_chip *gpch =
1740+ container_of(chip, struct ar231x_gpio_chip, chip);
1741+ u32 mask = 1 << gpio;
1742+ if (!(gpch->valid_mask & mask))
1743+ return -ENXIO;
1744+ ar5312_gpio_set_output(mask, 0);
1745+ return 0;
1746+}
1747+static int
1748+ar5312_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
1749+{
1750+ struct ar231x_gpio_chip *gpch =
1751+ container_of(chip, struct ar231x_gpio_chip, chip);
1752+ u32 mask = 1 << gpio;
1753+ if (!(gpch->valid_mask & mask))
1754+ return -ENXIO;
1755+ ar5312_gpio_set_output(mask, mask);
1756+ ar5312_gpio_set(mask, (!!value) * mask);
1757+ return 0;
1758+}
1759+
1760+static struct ar231x_gpio_chip ar5312_gpio_chip = {
1761+ .valid_mask = (1 << 22) - 1,
1762+ .chip = {
1763+ .label = "ar5312-gpio",
1764+ .direction_input = ar5312_gpio_direction_input,
1765+ .direction_output = ar5312_gpio_direction_output,
1766+ .set = ar5312_gpio_set_value,
1767+ .get = ar5312_gpio_get_value,
1768+ .base = 0,
1769+ .ngpio = AR531X_GPIO_IRQ_COUNT, // 22
1770+ }
1771+};
1772+
1773+// end of gpiolib
1774+
1775+static struct physmap_flash_data ar5312_flash_data = {
1776+ .width = 2,
1777+};
1778+
1779+static struct resource ar5312_flash_resource = {
1780+ .start = AR531X_FLASH,
1781+ .end = AR531X_FLASH + 0x800000 - 1,
1782+ .flags = IORESOURCE_MEM,
1783+};
1784+
1785+static struct ar231x_eth ar5312_eth0_data = {
1786+ .reset_base = AR531X_RESET,
1787+ .reset_mac = AR531X_RESET_ENET0,
1788+ .reset_phy = AR531X_RESET_EPHY0,
1789+ .phy_base = KSEG1ADDR(AR531X_ENET0),
1790+ .config = &ar231x_board,
1791+};
1792+
1793+static struct ar231x_eth ar5312_eth1_data = {
1794+ .reset_base = AR531X_RESET,
1795+ .reset_mac = AR531X_RESET_ENET1,
1796+ .reset_phy = AR531X_RESET_EPHY1,
1797+ .phy_base = KSEG1ADDR(AR531X_ENET1),
1798+ .config = &ar231x_board,
1799+};
1800+
1801+static struct platform_device ar5312_physmap_flash = {
1802+ .name = "physmap-flash",
1803+ .id = 0,
1804+ .dev.platform_data = &ar5312_flash_data,
1805+ .resource = &ar5312_flash_resource,
1806+ .num_resources = 1,
1807+};
1808+
1809+#ifdef CONFIG_LEDS_GPIO
1810+static struct gpio_led ar5312_leds[] = {
1811+ { .name = "wlan", .gpio = 0, .active_low = 1, },
1812+};
1813+
1814+static const struct gpio_led_platform_data ar5312_led_data = {
1815+ .num_leds = ARRAY_SIZE(ar5312_leds),
1816+ .leds = (void *) ar5312_leds,
1817+};
1818+
1819+static struct platform_device ar5312_gpio_leds = {
1820+ .name = "leds-gpio",
1821+ .id = -1,
1822+ .dev.platform_data = (void *) &ar5312_led_data,
1823+};
1824+#endif
1825+
1826+/*
1827+ * NB: This mapping size is larger than the actual flash size,
1828+ * but this shouldn't be a problem here, because the flash
1829+ * will simply be mapped multiple times.
1830+ */
1831+static char __init *ar5312_flash_limit(void)
1832+{
1833+ u32 ctl;
1834+ /*
1835+ * Configure flash bank 0.
1836+ * Assume 8M window size. Flash will be aliased if it's smaller
1837+ */
1838+ ctl = FLASHCTL_E |
1839+ FLASHCTL_AC_8M |
1840+ FLASHCTL_RBLE |
1841+ (0x01 << FLASHCTL_IDCY_S) |
1842+ (0x07 << FLASHCTL_WST1_S) |
1843+ (0x07 << FLASHCTL_WST2_S) |
1844+ (ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW);
1845+
1846+ ar231x_write_reg(AR531X_FLASHCTL0, ctl);
1847+
1848+ /* Disable other flash banks */
1849+ ar231x_write_reg(AR531X_FLASHCTL1,
1850+ ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
1851+
1852+ ar231x_write_reg(AR531X_FLASHCTL2,
1853+ ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
1854+
1855+ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
1856+}
1857+
1858+int __init ar5312_init_devices(void)
1859+{
1860+ struct ar231x_boarddata *config;
1861+ u32 fctl = 0;
1862+ u8 *c;
1863+
1864+ if (!is_5312())
1865+ return 0;
1866+
1867+ /* Locate board/radio config data */
1868+ ar231x_find_config(ar5312_flash_limit());
1869+ config = ar231x_board.config;
1870+
1871+ /* AR2313 has CPU minor rev. 10 */
1872+ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
1873+ ar231x_devtype = DEV_TYPE_AR2313;
1874+
1875+ /* AR2312 shares the same Silicon ID as AR5312 */
1876+ else if (config->flags & BD_ISCASPER)
1877+ ar231x_devtype = DEV_TYPE_AR2312;
1878+
1879+ /* Everything else is probably AR5312 or compatible */
1880+ else
1881+ ar231x_devtype = DEV_TYPE_AR5312;
1882+
1883+ /* fixup flash width */
1884+ fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW;
1885+ switch (fctl) {
1886+ case FLASHCTL_MWx16:
1887+ ar5312_flash_data.width = 2;
1888+ break;
1889+ case FLASHCTL_MWx8:
1890+ default:
1891+ ar5312_flash_data.width = 1;
1892+ break;
1893+ }
1894+
1895+ platform_device_register(&ar5312_physmap_flash);
1896+
1897+#ifdef CONFIG_LEDS_GPIO
1898+ ar5312_leds[0].gpio = config->sysLedGpio;
1899+ platform_device_register(&ar5312_gpio_leds);
1900+#endif
1901+
1902+ /* Fix up MAC addresses if necessary */
1903+ if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6))
1904+ memcpy(config->enet0_mac, config->enet1_mac, 6);
1905+
1906+ /* If ENET0 and ENET1 have the same mac address,
1907+ * increment the one from ENET1 */
1908+ if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) {
1909+ c = config->enet1_mac + 5;
1910+ while ((c >= config->enet1_mac) && !(++(*c)))
1911+ c--;
1912+ }
1913+
1914+ switch(ar231x_devtype) {
1915+ case DEV_TYPE_AR5312:
1916+ ar5312_eth0_data.macaddr = config->enet0_mac;
1917+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
1918+ AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data);
1919+
1920+ ar5312_eth1_data.macaddr = config->enet1_mac;
1921+ ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1),
1922+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
1923+
1924+ if (!ar231x_board.radio)
1925+ return 0;
1926+
1927+ if (!(config->flags & BD_WLAN0))
1928+ break;
1929+
1930+ ar231x_add_wmac(0, AR531X_WLAN0, AR5312_IRQ_WLAN0_INTRS);
1931+ break;
1932+ /*
1933+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
1934+ * of ENET1. Atheros calls it 'twisted' for a reason :)
1935+ */
1936+ case DEV_TYPE_AR2312:
1937+ case DEV_TYPE_AR2313:
1938+ ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base;
1939+ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
1940+ ar5312_eth1_data.macaddr = config->enet0_mac;
1941+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1),
1942+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
1943+
1944+ if (!ar231x_board.radio)
1945+ return 0;
1946+ break;
1947+ default:
1948+ break;
1949+ }
1950+
1951+ if (config->flags & BD_WLAN1)
1952+ ar231x_add_wmac(1, AR531X_WLAN1, AR5312_IRQ_WLAN1_INTRS);
1953+
1954+ return 0;
1955+}
1956+
1957+
1958+static void ar5312_restart(char *command)
1959+{
1960+ /* reset the system */
1961+ local_irq_disable();
1962+ while(1) {
1963+ ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM);
1964+ }
1965+}
1966+
1967+
1968+/*
1969+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
1970+ * to determine the predevisor value.
1971+ */
1972+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
1973+
1974+
1975+static int __init
1976+ar5312_cpu_frequency(void)
1977+{
1978+ unsigned int result;
1979+ unsigned int predivide_mask, predivide_shift;
1980+ unsigned int multiplier_mask, multiplier_shift;
1981+ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
1982+ unsigned int doubler_mask;
1983+ u16 devid;
1984+
1985+ /* Trust the bootrom's idea of cpu frequency. */
1986+ if ((result = ar231x_read_reg(AR5312_SCRATCH)))
1987+ return result;
1988+
1989+ devid = ar231x_read_reg(AR531X_REV);
1990+ devid &= AR531X_REV_MAJ;
1991+ devid >>= AR531X_REV_MAJ_S;
1992+ if (devid == AR531X_REV_MAJ_AR2313) {
1993+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
1994+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
1995+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
1996+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
1997+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
1998+ } else { /* AR5312 and AR2312 */
1999+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
2000+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
2001+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
2002+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
2003+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
2004+ }
2005+
2006+ /*
2007+ * Clocking is derived from a fixed 40MHz input clock.
2008+ *
2009+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
2010+ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
2011+ * flash, Timer, Watchdog Timer)
2012+ *
2013+ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
2014+ *
2015+ * So, for example, with a PLL multiplier of 5, we have
2016+ *
2017+ * cpuFreq = 200MHz
2018+ * sysFreq = 50MHz
2019+ * cntFreq = 100MHz
2020+ *
2021+ * We compute the CPU frequency, based on PLL settings.
2022+ */
2023+
2024+ clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1);
2025+ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
2026+ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
2027+ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
2028+
2029+ if (clockCtl1 & doubler_mask) {
2030+ multiplier = multiplier << 1;
2031+ }
2032+ return (40000000 / preDivisor) * multiplier;
2033+}
2034+
2035+static inline int
2036+ar5312_sys_frequency(void)
2037+{
2038+ return ar5312_cpu_frequency() / 4;
2039+}
2040+
2041+void __init
2042+ar5312_time_init(void)
2043+{
2044+ if (!is_5312())
2045+ return;
2046+
2047+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
2048+}
2049+
2050+int __init
2051+ar5312_gpio_init(void)
2052+{
2053+ int ret;
2054+ struct ar231x_gpio_chip *gpch;
2055+ gpch = &ar5312_gpio_chip;
2056+ ret = gpiochip_add(&gpch->chip);
2057+ if (ret) {
2058+ printk(KERN_ERR "%s: failed to add gpiochip\n",
2059+ gpch->chip.label);
2060+ return ret;
2061+ }
2062+ printk(KERN_INFO "%s: registered %d GPIOs\n",
2063+ gpch->chip.label, gpch->chip.ngpio);
2064+ return ret;
2065+}
2066+
2067+void __init
2068+ar5312_prom_init(void)
2069+{
2070+ u32 memsize, memcfg, bank0AC, bank1AC;
2071+ u32 devid;
2072+
2073+ if (!is_5312())
2074+ return;
2075+
2076+ /* Detect memory size */
2077+ memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
2078+ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
2079+ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
2080+ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
2081+ + (bank1AC ? (1 << (bank1AC+1)) : 0);
2082+ memsize <<= 20;
2083+ add_memory_region(0, memsize, BOOT_MEM_RAM);
2084+
2085+ devid = ar231x_read_reg(AR531X_REV);
2086+ devid >>= AR531X_REV_WMAC_MIN_S;
2087+ devid &= AR531X_REV_CHIP;
2088+ ar231x_board.devid = (u16) devid;
2089+ ar5312_gpio_init();
2090+}
2091+
2092+void __init
2093+ar5312_plat_setup(void)
2094+{
2095+ if (!is_5312())
2096+ return;
2097+
2098+ /* Clear any lingering AHB errors */
2099+ ar231x_read_reg(AR531X_PROCADDR);
2100+ ar231x_read_reg(AR531X_DMAADDR);
2101+ ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
2102+
2103+ _machine_restart = ar5312_restart;
2104+ ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
2105+}
2106+
2107--- /dev/null
2108+++ b/arch/mips/ar231x/ar2315.c
2109@@ -0,0 +1,694 @@
2110+/*
2111+ * This file is subject to the terms and conditions of the GNU General Public
2112+ * License. See the file "COPYING" in the main directory of this archive
2113+ * for more details.
2114+ *
2115+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
2116+ * Copyright (C) 2006 FON Technology, SL.
2117+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
2118+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
2119+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
2120+ */
2121+
2122+/*
2123+ * Platform devices for Atheros SoCs
2124+ */
2125+
2126+#include <generated/autoconf.h>
2127+#include <linux/init.h>
2128+#include <linux/module.h>
2129+#include <linux/types.h>
2130+#include <linux/string.h>
2131+#include <linux/platform_device.h>
2132+#include <linux/kernel.h>
2133+#include <linux/reboot.h>
2134+#include <linux/delay.h>
2135+#include <linux/leds.h>
2136+#include <linux/gpio.h>
2137+#include <asm/bootinfo.h>
2138+#include <asm/reboot.h>
2139+#include <asm/time.h>
2140+#include <linux/irq.h>
2141+#include <asm/io.h>
2142+
2143+#include <ar231x_platform.h>
2144+#include <ar2315_regs.h>
2145+#include <ar231x.h>
2146+#include "devices.h"
2147+#include "ar2315.h"
2148+
2149+static u32 gpiointmask = 0, gpiointval = 0;
2150+
2151+static inline void ar2315_gpio_irq(void)
2152+{
2153+ u32 pend;
2154+ int bit = -1;
2155+
2156+ /* only do one gpio interrupt at a time */
2157+ pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask;
2158+
2159+ if (pend) {
2160+ bit = fls(pend) - 1;
2161+ pend &= ~(1 << bit);
2162+ gpiointval ^= (1 << bit);
2163+ }
2164+
2165+ if (!pend)
2166+ ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO);
2167+
2168+ /* Enable interrupt with edge detection */
2169+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(bit)) != AR2315_GPIO_CR_I(bit))
2170+ return;
2171+
2172+ if (bit >= 0)
2173+ do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
2174+}
2175+
2176+
2177+/*
2178+ * Called when an interrupt is received, this function
2179+ * determines exactly which interrupt it was, and it
2180+ * invokes the appropriate handler.
2181+ *
2182+ * Implicitly, we also define interrupt priority by
2183+ * choosing which to dispatch first.
2184+ */
2185+static asmlinkage void
2186+ar2315_irq_dispatch(void)
2187+{
2188+ int pending = read_c0_status() & read_c0_cause();
2189+
2190+ if (pending & CAUSEF_IP3)
2191+ do_IRQ(AR2315_IRQ_WLAN0_INTRS);
2192+ else if (pending & CAUSEF_IP4)
2193+ do_IRQ(AR2315_IRQ_ENET0_INTRS);
2194+ else if (pending & CAUSEF_IP2) {
2195+ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
2196+
2197+ if (misc_intr & AR2315_ISR_SPI)
2198+ do_IRQ(AR531X_MISC_IRQ_SPI);
2199+ else if (misc_intr & AR2315_ISR_TIMER)
2200+ do_IRQ(AR531X_MISC_IRQ_TIMER);
2201+ else if (misc_intr & AR2315_ISR_AHB)
2202+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
2203+ else if (misc_intr & AR2315_ISR_GPIO)
2204+ ar2315_gpio_irq();
2205+ else if (misc_intr & AR2315_ISR_UART0)
2206+ do_IRQ(AR531X_MISC_IRQ_UART0);
2207+ else if (misc_intr & AR2315_ISR_WD)
2208+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
2209+ else
2210+ do_IRQ(AR531X_MISC_IRQ_NONE);
2211+ } else if (pending & CAUSEF_IP7)
2212+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
2213+}
2214+
2215+static void ar2315_set_gpiointmask(int gpio, int level)
2216+{
2217+ u32 reg;
2218+
2219+ reg = ar231x_read_reg(AR2315_GPIO_INT);
2220+ reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M);
2221+ reg |= gpio | AR2315_GPIO_INT_LVL(level);
2222+ ar231x_write_reg(AR2315_GPIO_INT, reg);
2223+}
2224+
2225+static void ar2315_gpio_intr_enable(struct irq_data *d)
2226+{
2227+ unsigned int gpio = d->irq - AR531X_GPIO_IRQ_BASE;
2228+
2229+ /* Enable interrupt with edge detection */
2230+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(gpio)) != AR2315_GPIO_CR_I(gpio))
2231+ return;
2232+
2233+ gpiointmask |= (1 << gpio);
2234+ ar2315_set_gpiointmask(gpio, 3);
2235+}
2236+
2237+static void ar2315_gpio_intr_disable(struct irq_data *d)
2238+{
2239+ unsigned int gpio = d->irq - AR531X_GPIO_IRQ_BASE;
2240+
2241+ /* Disable interrupt */
2242+ gpiointmask &= ~(1 << gpio);
2243+ ar2315_set_gpiointmask(gpio, 0);
2244+}
2245+
2246+static struct irq_chip ar2315_gpio_intr_controller = {
2247+ .irq_mask = ar2315_gpio_intr_disable,
2248+ .irq_unmask = ar2315_gpio_intr_enable,
2249+};
2250+
2251+static void
2252+ar2315_misc_intr_enable(struct irq_data *d)
2253+{
2254+ unsigned int imr;
2255+
2256+ imr = ar231x_read_reg(AR2315_IMR);
2257+ switch(d->irq) {
2258+ case AR531X_MISC_IRQ_SPI:
2259+ imr |= AR2315_ISR_SPI;
2260+ break;
2261+ case AR531X_MISC_IRQ_TIMER:
2262+ imr |= AR2315_ISR_TIMER;
2263+ break;
2264+ case AR531X_MISC_IRQ_AHB_PROC:
2265+ imr |= AR2315_ISR_AHB;
2266+ break;
2267+ case AR531X_MISC_IRQ_GPIO:
2268+ imr |= AR2315_ISR_GPIO;
2269+ break;
2270+ case AR531X_MISC_IRQ_UART0:
2271+ imr |= AR2315_ISR_UART0;
2272+ break;
2273+ case AR531X_MISC_IRQ_WATCHDOG:
2274+ imr |= AR2315_ISR_WD;
2275+ break;
2276+ default:
2277+ break;
2278+ }
2279+ ar231x_write_reg(AR2315_IMR, imr);
2280+}
2281+
2282+static void
2283+ar2315_misc_intr_disable(struct irq_data *d)
2284+{
2285+ unsigned int imr;
2286+
2287+ imr = ar231x_read_reg(AR2315_IMR);
2288+ switch(d->irq) {
2289+ case AR531X_MISC_IRQ_SPI:
2290+ imr &= ~AR2315_ISR_SPI;
2291+ break;
2292+ case AR531X_MISC_IRQ_TIMER:
2293+ imr &= ~AR2315_ISR_TIMER;
2294+ break;
2295+ case AR531X_MISC_IRQ_AHB_PROC:
2296+ imr &= ~AR2315_ISR_AHB;
2297+ break;
2298+ case AR531X_MISC_IRQ_GPIO:
2299+ imr &= ~AR2315_ISR_GPIO;
2300+ break;
2301+ case AR531X_MISC_IRQ_UART0:
2302+ imr &= ~AR2315_ISR_UART0;
2303+ break;
2304+ case AR531X_MISC_IRQ_WATCHDOG:
2305+ imr &= ~AR2315_ISR_WD;
2306+ break;
2307+ default:
2308+ break;
2309+ }
2310+ ar231x_write_reg(AR2315_IMR, imr);
2311+}
2312+
2313+static struct irq_chip ar2315_misc_intr_controller = {
2314+ .irq_mask = ar2315_misc_intr_disable,
2315+ .irq_unmask = ar2315_misc_intr_enable,
2316+};
2317+
2318+static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id)
2319+{
2320+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
2321+ ar231x_read_reg(AR2315_AHB_ERR1);
2322+
2323+ printk(KERN_ERR "AHB fatal error\n");
2324+ machine_restart("AHB error"); /* Catastrophic failure */
2325+
2326+ return IRQ_HANDLED;
2327+}
2328+
2329+static struct irqaction ar2315_ahb_proc_interrupt = {
2330+ .handler = ar2315_ahb_proc_handler,
2331+ .name = "ar2315_ahb_proc_interrupt",
2332+};
2333+
2334+static struct irqaction cascade = {
2335+ .handler = no_action,
2336+ .name = "cascade",
2337+};
2338+
2339+void
2340+ar2315_irq_init(void)
2341+{
2342+ int i;
2343+
2344+ if (!is_2315())
2345+ return;
2346+
2347+ ar231x_irq_dispatch = ar2315_irq_dispatch;
2348+ gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
2349+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
2350+ int irq = AR531X_MISC_IRQ_BASE + i;
2351+ irq_set_chip_and_handler(irq, &ar2315_misc_intr_controller,
2352+ handle_level_irq);
2353+ }
2354+ for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) {
2355+ int irq = AR531X_GPIO_IRQ_BASE + i;
2356+ irq_set_chip_and_handler(irq, &ar2315_gpio_intr_controller,
2357+ handle_level_irq);
2358+ }
2359+ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
2360+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt);
2361+ setup_irq(AR2315_IRQ_MISC_INTRS, &cascade);
2362+}
2363+
2364+static u32
2365+ar2315_gpio_set_output(u32 mask, u32 val)
2366+{
2367+ u32 reg;
2368+
2369+ reg = ar231x_read_reg(AR2315_GPIO_CR);
2370+ reg &= ~mask;
2371+ reg |= val;
2372+ ar231x_write_reg(AR2315_GPIO_CR, reg);
2373+ return reg;
2374+}
2375+
2376+static u32
2377+ar2315_gpio_get(u32 valid_mask)
2378+{
2379+ u32 reg;
2380+ reg = ar231x_read_reg(AR2315_GPIO_DI);
2381+ reg &= valid_mask;
2382+ return reg;
2383+}
2384+
2385+static u32
2386+ar2315_gpio_set(u32 mask, u32 value)
2387+{
2388+ u32 reg;
2389+ reg = ar231x_read_reg(AR2315_GPIO_DO);
2390+ reg &= ~mask;
2391+ reg |= value;
2392+ ar231x_write_reg(AR2315_GPIO_DO, reg);
2393+ return reg;
2394+}
2395+
2396+/*
2397+ * gpiolib implementation. Original legacy mask based methods
2398+ * preserved for now.
2399+ */
2400+static int
2401+ar2315_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
2402+{
2403+ struct ar231x_gpio_chip *gpch =
2404+ container_of(chip, struct ar231x_gpio_chip, chip);
2405+ u32 mask = 1 << gpio;
2406+ u32 rett;
2407+ if (!(gpch->valid_mask & mask))
2408+ return 0;
2409+ rett = ar2315_gpio_get(gpch->valid_mask); // legacy code
2410+ return !!(rett & mask);
2411+}
2412+
2413+static void
2414+ar2315_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
2415+{
2416+ struct ar231x_gpio_chip *gpch =
2417+ container_of(chip, struct ar231x_gpio_chip, chip);
2418+ u32 mask = 1 << gpio;
2419+ if (!(gpch->valid_mask & mask))
2420+ return;
2421+ ar2315_gpio_set(mask, (!!value) * mask); // legacy
2422+}
2423+
2424+static int
2425+ar2315_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
2426+{
2427+ struct ar231x_gpio_chip *gpch =
2428+ container_of(chip, struct ar231x_gpio_chip, chip);
2429+ u32 mask = 1 << gpio;
2430+ if (!(gpch->valid_mask & mask))
2431+ return -ENXIO;
2432+ ar2315_gpio_set_output(mask, 0); // legacy
2433+ return 0;
2434+}
2435+
2436+static int
2437+ar2315_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
2438+{
2439+ struct ar231x_gpio_chip *gpch =
2440+ container_of(chip, struct ar231x_gpio_chip, chip);
2441+ u32 mask = 1 << gpio;
2442+ if (!(gpch->valid_mask & mask))
2443+ return -ENXIO;
2444+ ar2315_gpio_set_output(mask, mask); // both legacy
2445+ ar2315_gpio_set(mask, (!!value) * mask);
2446+ return 0;
2447+}
2448+
2449+static struct ar231x_gpio_chip ar2315_gpio_chip = {
2450+ .valid_mask = (1 << 22) - 1,
2451+ .chip = {
2452+ .label = "ar2315-gpio",
2453+ .direction_input = ar2315_gpio_direction_input,
2454+ .direction_output = ar2315_gpio_direction_output,
2455+ .set = ar2315_gpio_set_value,
2456+ .get = ar2315_gpio_get_value,
2457+ .base = 0,
2458+ .ngpio = AR531X_GPIO_IRQ_COUNT, // 22
2459+ }
2460+};
2461+
2462+// end of gpiolib
2463+
2464+
2465+static struct ar231x_eth ar2315_eth_data = {
2466+ .reset_base = AR2315_RESET,
2467+ .reset_mac = AR2315_RESET_ENET0,
2468+ .reset_phy = AR2315_RESET_EPHY0,
2469+ .phy_base = KSEG1ADDR(AR2315_ENET0),
2470+ .config = &ar231x_board,
2471+};
2472+
2473+static struct resource ar2315_spiflash_res[] = {
2474+ {
2475+ .name = "flash_base",
2476+ .flags = IORESOURCE_MEM,
2477+ .start = KSEG1ADDR(AR2315_SPI_READ),
2478+ .end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1,
2479+ },
2480+ {
2481+ .name = "flash_regs",
2482+ .flags = IORESOURCE_MEM,
2483+ .start = 0x11300000,
2484+ .end = 0x11300012,
2485+ },
2486+};
2487+
2488+static struct platform_device ar2315_spiflash = {
2489+ .id = 0,
2490+ .name = "spiflash",
2491+ .resource = ar2315_spiflash_res,
2492+ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
2493+};
2494+
2495+static struct platform_device ar2315_wdt = {
2496+ .id = 0,
2497+ .name = "ar2315_wdt",
2498+};
2499+
2500+#define SPI_FLASH_CTL 0x00
2501+#define SPI_FLASH_OPCODE 0x04
2502+#define SPI_FLASH_DATA 0x08
2503+
2504+static inline u32
2505+spiflash_read_reg(int reg)
2506+{
2507+ return ar231x_read_reg(AR2315_SPI + reg);
2508+}
2509+
2510+static inline void
2511+spiflash_write_reg(int reg, u32 data)
2512+{
2513+ ar231x_write_reg(AR2315_SPI + reg, data);
2514+}
2515+
2516+static u32
2517+spiflash_wait_status(void)
2518+{
2519+ u32 reg;
2520+
2521+ do {
2522+ reg = spiflash_read_reg(SPI_FLASH_CTL);
2523+ } while (reg & SPI_CTL_BUSY);
2524+
2525+ return reg;
2526+}
2527+
2528+static u8
2529+spiflash_probe(void)
2530+{
2531+ u32 reg;
2532+
2533+ reg = spiflash_wait_status();
2534+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
2535+ reg |= (1 << 4) | 4 | SPI_CTL_START;
2536+
2537+ spiflash_write_reg(SPI_FLASH_OPCODE, 0xab);
2538+ spiflash_write_reg(SPI_FLASH_CTL, reg);
2539+
2540+ reg = spiflash_wait_status();
2541+ reg = spiflash_read_reg(SPI_FLASH_DATA);
2542+ reg &= 0xff;
2543+
2544+ return (u8) reg;
2545+}
2546+
2547+
2548+#define STM_8MBIT_SIGNATURE 0x13
2549+#define STM_16MBIT_SIGNATURE 0x14
2550+#define STM_32MBIT_SIGNATURE 0x15
2551+#define STM_64MBIT_SIGNATURE 0x16
2552+#define STM_128MBIT_SIGNATURE 0x17
2553+
2554+static u8 __init *
2555+ar2315_flash_limit(void)
2556+{
2557+ u32 flash_size = 0;
2558+
2559+ /* probe the flash chip size */
2560+ switch(spiflash_probe()) {
2561+ case STM_8MBIT_SIGNATURE:
2562+ flash_size = 0x00100000;
2563+ break;
2564+ case STM_16MBIT_SIGNATURE:
2565+ flash_size = 0x00200000;
2566+ break;
2567+ case STM_32MBIT_SIGNATURE:
2568+ flash_size = 0x00400000;
2569+ break;
2570+ case STM_64MBIT_SIGNATURE:
2571+ flash_size = 0x00800000;
2572+ break;
2573+ case STM_128MBIT_SIGNATURE:
2574+ flash_size = 0x01000000;
2575+ break;
2576+ }
2577+
2578+ ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start +
2579+ flash_size - 1;
2580+ return (u8 *) ar2315_spiflash_res[0].end + 1;
2581+}
2582+
2583+#ifdef CONFIG_LEDS_GPIO
2584+static struct gpio_led ar2315_leds[6];
2585+static struct gpio_led_platform_data ar2315_led_data = {
2586+ .leds = (void *) ar2315_leds,
2587+};
2588+
2589+static struct platform_device ar2315_gpio_leds = {
2590+ .name = "leds-gpio",
2591+ .id = -1,
2592+ .dev = {
2593+ .platform_data = (void *) &ar2315_led_data,
2594+ }
2595+};
2596+
2597+static void __init
2598+ar2315_init_gpio_leds(void)
2599+{
2600+ static char led_names[6][6];
2601+ int i, led = 0;
2602+
2603+ ar2315_led_data.num_leds = 0;
2604+ for(i = 1; i < 8; i++)
2605+ {
2606+ if((i == AR2315_RESET_GPIO) ||
2607+ (i == ar231x_board.config->resetConfigGpio))
2608+ continue;
2609+
2610+ if(i == ar231x_board.config->sysLedGpio)
2611+ strcpy(led_names[led], "wlan");
2612+ else
2613+ sprintf(led_names[led], "gpio%d", i);
2614+
2615+ ar2315_leds[led].name = led_names[led];
2616+ ar2315_leds[led].gpio = i;
2617+ ar2315_leds[led].active_low = 0;
2618+ led++;
2619+ }
2620+ ar2315_led_data.num_leds = led;
2621+ platform_device_register(&ar2315_gpio_leds);
2622+}
2623+#else
2624+static inline void ar2315_init_gpio_leds(void)
2625+{
2626+}
2627+#endif
2628+
2629+int __init
2630+ar2315_init_devices(void)
2631+{
2632+ if (!is_2315())
2633+ return 0;
2634+
2635+ /* Find board configuration */
2636+ ar231x_find_config(ar2315_flash_limit());
2637+ ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
2638+
2639+ ar2315_init_gpio_leds();
2640+ platform_device_register(&ar2315_wdt);
2641+ platform_device_register(&ar2315_spiflash);
2642+ ar231x_add_ethernet(0, KSEG1ADDR(AR2315_ENET0), AR2315_IRQ_ENET0_INTRS,
2643+ &ar2315_eth_data);
2644+ ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
2645+
2646+ return 0;
2647+}
2648+
2649+static void
2650+ar2315_restart(char *command)
2651+{
2652+ void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
2653+
2654+ local_irq_disable();
2655+
2656+ /* try reset the system via reset control */
2657+ ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM);
2658+
2659+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
2660+ * give it some time to attempt a gpio based hardware reset
2661+ * (atheros reference design workaround) */
2662+ gpio_direction_output(AR2315_RESET_GPIO, 0);
2663+ mdelay(100);
2664+
2665+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
2666+ * workaround. Attempt to jump to the mips reset location -
2667+ * the boot loader itself might be able to recover the system */
2668+ mips_reset_vec();
2669+}
2670+
2671+
2672+/*
2673+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
2674+ * to determine the predevisor value.
2675+ */
2676+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
2677+static int __initdata PLLC_DIVIDE_TABLE[5] = { 2, 3, 4, 6, 3 };
2678+
2679+static unsigned int __init
2680+ar2315_sys_clk(unsigned int clockCtl)
2681+{
2682+ unsigned int pllcCtrl,cpuDiv;
2683+ unsigned int pllcOut,refdiv,fdiv,divby2;
2684+ unsigned int clkDiv;
2685+
2686+ pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL);
2687+ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
2688+ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
2689+ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
2690+ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
2691+ divby2 += 1;
2692+ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
2693+
2694+
2695+ /* clkm input selected */
2696+ switch(clockCtl & CPUCLK_CLK_SEL_M) {
2697+ case 0:
2698+ case 1:
2699+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
2700+ break;
2701+ case 2:
2702+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
2703+ break;
2704+ default:
2705+ pllcOut = 40000000;
2706+ clkDiv = 1;
2707+ break;
2708+ }
2709+ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
2710+ cpuDiv = cpuDiv * 2 ?: 1;
2711+ return (pllcOut/(clkDiv * cpuDiv));
2712+}
2713+
2714+static inline unsigned int
2715+ar2315_cpu_frequency(void)
2716+{
2717+ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK));
2718+}
2719+
2720+static inline unsigned int
2721+ar2315_apb_frequency(void)
2722+{
2723+ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK));
2724+}
2725+
2726+void __init
2727+ar2315_time_init(void)
2728+{
2729+ if (!is_2315())
2730+ return;
2731+
2732+ mips_hpt_frequency = ar2315_cpu_frequency() / 2;
2733+}
2734+
2735+int __init
2736+ar2315_gpio_init(void)
2737+{
2738+ int ret;
2739+ struct ar231x_gpio_chip *gpch;
2740+ gpch = &ar2315_gpio_chip;
2741+ ret = gpiochip_add(&gpch->chip);
2742+ if (ret) {
2743+ printk(KERN_ERR "%s: failed to add gpiochip\n",
2744+ gpch->chip.label);
2745+ return ret;
2746+ }
2747+ printk(KERN_INFO "%s: registered %d GPIOs\n",
2748+ gpch->chip.label, gpch->chip.ngpio);
2749+ return ret;
2750+}
2751+
2752+
2753+
2754+void __init
2755+ar2315_prom_init(void)
2756+{
2757+ u32 memsize, memcfg, devid;
2758+
2759+ if (!is_2315())
2760+ return;
2761+
2762+ memcfg = ar231x_read_reg(AR2315_MEM_CFG);
2763+ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
2764+ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
2765+ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
2766+ memsize <<= 3;
2767+ add_memory_region(0, memsize, BOOT_MEM_RAM);
2768+
2769+ /* Detect the hardware based on the device ID */
2770+ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP;
2771+ switch(devid) {
2772+ case 0x90:
2773+ case 0x91:
2774+ ar231x_devtype = DEV_TYPE_AR2317;
2775+ break;
2776+ default:
2777+ ar231x_devtype = DEV_TYPE_AR2315;
2778+ break;
2779+ }
2780+ ar2315_gpio_init();
2781+ ar231x_board.devid = devid;
2782+}
2783+
2784+void __init
2785+ar2315_plat_setup(void)
2786+{
2787+ u32 config;
2788+
2789+ if (!is_2315())
2790+ return;
2791+
2792+ gpio_request(AR2315_RESET_GPIO, "reset");
2793+
2794+ /* Clear any lingering AHB errors */
2795+ config = read_c0_config();
2796+ write_c0_config(config & ~0x3);
2797+ ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET);
2798+ ar231x_read_reg(AR2315_AHB_ERR1);
2799+ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
2800+
2801+ _machine_restart = ar2315_restart;
2802+ ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency());
2803+}
2804--- /dev/null
2805+++ b/arch/mips/ar231x/ar2315.h
2806@@ -0,0 +1,37 @@
2807+#ifndef __AR2315_H
2808+#define __AR2315_H
2809+
2810+#ifdef CONFIG_ATHEROS_AR2315
2811+
2812+extern void ar2315_irq_init(void);
2813+extern int ar2315_init_devices(void);
2814+extern void ar2315_prom_init(void);
2815+extern void ar2315_plat_setup(void);
2816+extern void ar2315_time_init(void);
2817+
2818+#else
2819+
2820+static inline void ar2315_irq_init(void)
2821+{
2822+}
2823+
2824+static inline int ar2315_init_devices(void)
2825+{
2826+ return 0;
2827+}
2828+
2829+static inline void ar2315_prom_init(void)
2830+{
2831+}
2832+
2833+static inline void ar2315_plat_setup(void)
2834+{
2835+}
2836+
2837+static inline void ar2315_time_init(void)
2838+{
2839+}
2840+
2841+#endif
2842+
2843+#endif
2844--- /dev/null
2845+++ b/arch/mips/ar231x/ar5312.h
2846@@ -0,0 +1,38 @@
2847+#ifndef __AR5312_H
2848+#define __AR5312_H
2849+
2850+#ifdef CONFIG_ATHEROS_AR5312
2851+
2852+extern void ar5312_irq_init(void);
2853+extern int ar5312_init_devices(void);
2854+extern void ar5312_prom_init(void);
2855+extern void ar5312_plat_setup(void);
2856+extern void ar5312_time_init(void);
2857+extern void ar5312_time_init(void);
2858+
2859+#else
2860+
2861+static inline void ar5312_irq_init(void)
2862+{
2863+}
2864+
2865+static inline int ar5312_init_devices(void)
2866+{
2867+ return 0;
2868+}
2869+
2870+static inline void ar5312_prom_init(void)
2871+{
2872+}
2873+
2874+static inline void ar5312_plat_setup(void)
2875+{
2876+}
2877+
2878+static inline void ar5312_time_init(void)
2879+{
2880+}
2881+
2882+#endif
2883+
2884+#endif
2885--- /dev/null
2886+++ b/arch/mips/include/asm/mach-ar231x/ar231x.h
2887@@ -0,0 +1,57 @@
2888+#ifndef __AR531X_H
2889+#define __AR531X_H
2890+
2891+#include <linux/types.h>
2892+#include <linux/io.h>
2893+
2894+#define AR531X_MISC_IRQ_BASE 0x20
2895+#define AR531X_GPIO_IRQ_BASE 0x30
2896+
2897+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
2898+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
2899+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
2900+
2901+/* Miscellaneous interrupts, which share IP6 */
2902+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
2903+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
2904+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
2905+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
2906+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
2907+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
2908+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
2909+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
2910+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
2911+#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9
2912+#define AR531X_MISC_IRQ_COUNT 10
2913+
2914+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
2915+#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0
2916+#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n
2917+#define AR531X_GPIO_IRQ_COUNT 22
2918+
2919+static inline u32
2920+ar231x_read_reg(u32 reg)
2921+{
2922+ return __raw_readl((u32 *) KSEG1ADDR(reg));
2923+}
2924+
2925+static inline void
2926+ar231x_write_reg(u32 reg, u32 val)
2927+{
2928+ __raw_writel(val, (u32 *) KSEG1ADDR(reg));
2929+}
2930+
2931+static inline u32
2932+ar231x_mask_reg(u32 reg, u32 mask, u32 val)
2933+{
2934+ u32 ret;
2935+
2936+ ret = ar231x_read_reg(reg);
2937+ ret &= ~mask;
2938+ ret |= val;
2939+ ar231x_write_reg(reg, ret);
2940+
2941+ return ret;
2942+}
2943+
2944+#endif
2945--- /dev/null
2946+++ b/arch/mips/ar231x/devices.h
2947@@ -0,0 +1,42 @@
2948+#ifndef __AR231X_DEVICES_H
2949+#define __AR231X_DEVICES_H
2950+#include <linux/gpio.h>
2951+
2952+enum {
2953+ /* handled by ar5312.c */
2954+ DEV_TYPE_AR2312,
2955+ DEV_TYPE_AR2313,
2956+ DEV_TYPE_AR5312,
2957+
2958+ /* handled by ar2315.c */
2959+ DEV_TYPE_AR2315,
2960+ DEV_TYPE_AR2316,
2961+ DEV_TYPE_AR2317,
2962+
2963+ DEV_TYPE_UNKNOWN
2964+};
2965+
2966+extern int ar231x_devtype;
2967+extern struct ar231x_board_config ar231x_board;
2968+extern asmlinkage void (*ar231x_irq_dispatch)(void);
2969+
2970+extern int ar231x_find_config(u8 *flash_limit);
2971+extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk);
2972+extern int ar231x_add_wmac(int nr, u32 base, int irq);
2973+extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata);
2974+
2975+static inline bool is_2315(void)
2976+{
2977+ return (current_cpu_data.cputype == CPU_4KEC);
2978+}
2979+
2980+static inline bool is_5312(void)
2981+{
2982+ return !is_2315();
2983+}
2984+
2985+struct ar231x_gpio_chip {
2986+ u32 valid_mask;
2987+ struct gpio_chip chip;
2988+};
2989+#endif
2990--- /dev/null
2991+++ b/arch/mips/ar231x/devices.c
2992@@ -0,0 +1,168 @@
2993+#include <linux/kernel.h>
2994+#include <linux/init.h>
2995+#include <linux/serial.h>
2996+#include <linux/serial_core.h>
2997+#include <linux/serial_8250.h>
2998+#include <linux/platform_device.h>
2999+#include <ar231x_platform.h>
3000+#include <ar231x.h>
3001+#include "devices.h"
3002+#include "ar5312.h"
3003+#include "ar2315.h"
3004+
3005+struct ar231x_board_config ar231x_board;
3006+int ar231x_devtype = DEV_TYPE_UNKNOWN;
3007+
3008+static struct resource ar231x_eth0_res[] = {
3009+ {
3010+ .name = "eth0_membase",
3011+ .flags = IORESOURCE_MEM,
3012+ },
3013+ {
3014+ .name = "eth0_irq",
3015+ .flags = IORESOURCE_IRQ,
3016+ }
3017+};
3018+
3019+static struct resource ar231x_eth1_res[] = {
3020+ {
3021+ .name = "eth1_membase",
3022+ .flags = IORESOURCE_MEM,
3023+ },
3024+ {
3025+ .name = "eth1_irq",
3026+ .flags = IORESOURCE_IRQ,
3027+ }
3028+};
3029+
3030+static struct platform_device ar231x_eth[] = {
3031+ {
3032+ .id = 0,
3033+ .name = "ar231x-eth",
3034+ .resource = ar231x_eth0_res,
3035+ .num_resources = ARRAY_SIZE(ar231x_eth0_res)
3036+ },
3037+ {
3038+ .id = 1,
3039+ .name = "ar231x-eth",
3040+ .resource = ar231x_eth1_res,
3041+ .num_resources = ARRAY_SIZE(ar231x_eth1_res)
3042+ }
3043+};
3044+
3045+static struct resource ar231x_wmac0_res[] = {
3046+ {
3047+ .name = "wmac0_membase",
3048+ .flags = IORESOURCE_MEM,
3049+ },
3050+ {
3051+ .name = "wmac0_irq",
3052+ .flags = IORESOURCE_IRQ,
3053+ }
3054+};
3055+
3056+static struct resource ar231x_wmac1_res[] = {
3057+ {
3058+ .name = "wmac1_membase",
3059+ .flags = IORESOURCE_MEM,
3060+ },
3061+ {
3062+ .name = "wmac1_irq",
3063+ .flags = IORESOURCE_IRQ,
3064+ }
3065+};
3066+
3067+
3068+static struct platform_device ar231x_wmac[] = {
3069+ {
3070+ .id = 0,
3071+ .name = "ar231x-wmac",
3072+ .resource = ar231x_wmac0_res,
3073+ .num_resources = ARRAY_SIZE(ar231x_wmac0_res),
3074+ .dev.platform_data = &ar231x_board,
3075+ },
3076+ {
3077+ .id = 1,
3078+ .name = "ar231x-wmac",
3079+ .resource = ar231x_wmac1_res,
3080+ .num_resources = ARRAY_SIZE(ar231x_wmac1_res),
3081+ .dev.platform_data = &ar231x_board,
3082+ },
3083+};
3084+
3085+static const char *devtype_strings[] = {
3086+ [DEV_TYPE_AR5312] = "Atheros AR5312",
3087+ [DEV_TYPE_AR2312] = "Atheros AR2312",
3088+ [DEV_TYPE_AR2313] = "Atheros AR2313",
3089+ [DEV_TYPE_AR2315] = "Atheros AR2315",
3090+ [DEV_TYPE_AR2316] = "Atheros AR2316",
3091+ [DEV_TYPE_AR2317] = "Atheros AR2317",
3092+ [DEV_TYPE_UNKNOWN] = "Atheros (unknown)",
3093+};
3094+
3095+const char *get_system_type(void)
3096+{
3097+ if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) ||
3098+ !devtype_strings[ar231x_devtype])
3099+ return devtype_strings[DEV_TYPE_UNKNOWN];
3100+ return devtype_strings[ar231x_devtype];
3101+}
3102+
3103+
3104+int __init
3105+ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata)
3106+{
3107+ struct resource *res;
3108+
3109+ ar231x_eth[nr].dev.platform_data = pdata;
3110+ res = &ar231x_eth[nr].resource[0];
3111+ res->start = base;
3112+ res->end = base + 0x2000 - 1;
3113+ res++;
3114+ res->start = irq;
3115+ res->end = irq;
3116+ return platform_device_register(&ar231x_eth[nr]);
3117+}
3118+
3119+void __init
3120+ar231x_serial_setup(u32 mapbase, unsigned int uartclk)
3121+{
3122+ struct uart_port s;
3123+
3124+ memset(&s, 0, sizeof(s));
3125+
3126+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
3127+ s.iotype = UPIO_MEM;
3128+ s.irq = AR531X_MISC_IRQ_UART0;
3129+ s.regshift = 2;
3130+ s.mapbase = mapbase;
3131+ s.uartclk = uartclk;
3132+ s.membase = (void __iomem *)s.mapbase;
3133+
3134+ early_serial_setup(&s);
3135+}
3136+
3137+int __init
3138+ar231x_add_wmac(int nr, u32 base, int irq)
3139+{
3140+ struct resource *res;
3141+
3142+ ar231x_wmac[nr].dev.platform_data = &ar231x_board;
3143+ res = &ar231x_wmac[nr].resource[0];
3144+ res->start = base;
3145+ res->end = base + 0x10000 - 1;
3146+ res++;
3147+ res->start = irq;
3148+ res->end = irq;
3149+ return platform_device_register(&ar231x_wmac[nr]);
3150+}
3151+
3152+static int __init ar231x_register_devices(void)
3153+{
3154+ ar5312_init_devices();
3155+ ar2315_init_devices();
3156+
3157+ return 0;
3158+}
3159+
3160+device_initcall(ar231x_register_devices);
3161

Archive Download this file

Branches:
backfire
history
master
release_2010-11-17
release_2010-12-14
release_2011-02-23
release_2011-05-28
release_2011-08-27
release_2011-11-13
release_2012-03-18
release_2012-04-09
release_2012-10-11
uclibc_nptl



interactive