| 1 | #!/bin/sh /etc/rc.common |
| 2 | # Copyright (C) 2006 OpenWrt.org |
| 3 | |
| 4 | START=05 |
| 5 | |
| 6 | start() { |
| 7 | [ -e /etc/config/network ] && { |
| 8 | local batch |
| 9 | |
| 10 | config_cb() { |
| 11 | case "$1" in |
| 12 | switch) |
| 13 | option_cb() { |
| 14 | case "$1" in |
| 15 | vlan[0-9]|vlan1[0-5]) |
| 16 | local id="${1#vlan}" |
| 17 | local ports="${2%\*}" |
| 18 | append batch "delete network.eth0.${1}${N}" |
| 19 | append batch "set network.eth0_${id}=switch_vlan${N}" |
| 20 | append batch "set network.eth0_${id}.device=eth0${N}" |
| 21 | append batch "set network.eth0_${id}.vlan=${id}${N}" |
| 22 | append batch "set network.eth0_${id}.ports='${ports}'${N}" |
| 23 | ;; |
| 24 | esac |
| 25 | } |
| 26 | ;; |
| 27 | switch_vlan) |
| 28 | option_cb() { :; } |
| 29 | batch="" |
| 30 | ;; |
| 31 | esac |
| 32 | } |
| 33 | |
| 34 | config_load network |
| 35 | |
| 36 | [ -n "$batch" ] && { |
| 37 | logger -t netconfig "migrating switch config to new format ..." |
| 38 | echo "$batch${N}commit network" | uci batch |
| 39 | } |
| 40 | |
| 41 | exit 0 |
| 42 | } |
| 43 | |
| 44 | mkdir -p /etc/config |
| 45 | |
| 46 | ( |
| 47 | if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then |
| 48 | # WGT634u |
| 49 | echo boardtype=wgt634u |
| 50 | else |
| 51 | strings "$(find_mtd_part nvram)" |
| 52 | fi |
| 53 | ) | awk ' |
| 54 | function p(cfgname, name) { |
| 55 | if (c[name] != "") print " option " cfgname " \"" c[name] "\"" |
| 56 | } |
| 57 | |
| 58 | function vlan(id, name) { |
| 59 | if (c[name] != "") { |
| 60 | print "config switch_vlan eth0_" id |
| 61 | print " option device \"eth0\"" |
| 62 | print " option vlan " id |
| 63 | print " option ports \"" c[name] "\"" |
| 64 | print "" |
| 65 | } |
| 66 | } |
| 67 | |
| 68 | function macinc(mac, maca, i, result) { |
| 69 | split(mac, maca, ":") |
| 70 | for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i] |
| 71 | if (++maca[6] > 0xff) { |
| 72 | maca[5]++ |
| 73 | maca[6] = 0 |
| 74 | } |
| 75 | for (i = 1; i <= 6; i++) { |
| 76 | if (i != 1) result = result ":" |
| 77 | result = result sprintf("%02x", maca[i]) |
| 78 | } |
| 79 | return result |
| 80 | } |
| 81 | |
| 82 | BEGIN { |
| 83 | FS="=" |
| 84 | c["lan_ifname"]="eth0.0" |
| 85 | c["wan_ifname"]="eth0.1" |
| 86 | c["vlan0ports"]="1 2 3 4 5" |
| 87 | c["vlan1ports"]="0 5" |
| 88 | getline < "/proc/diag/model" |
| 89 | model=$0 |
| 90 | for (i = 0; i < 6; i++) { |
| 91 | if (mac_check != "") mac_check = mac_check ":" |
| 92 | mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]" |
| 93 | } |
| 94 | } |
| 95 | |
| 96 | ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) { |
| 97 | nvram[$1] = $2 |
| 98 | } |
| 99 | |
| 100 | END { |
| 101 | if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) { |
| 102 | c["wan_ifname"] = "" |
| 103 | c["lan_ifname"] = "eth1" |
| 104 | } |
| 105 | if (model == "ASUS WL-330gE") { |
| 106 | c["wan_ifname"] = "" |
| 107 | c["lan_ifname"] = "eth0.0" |
| 108 | c["vlan0ports"] = "4 5" |
| 109 | c["vlan1ports"] = "" |
| 110 | } |
| 111 | if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) { |
| 112 | c["wan_ifname"] = "eth1" |
| 113 | c["lan_ifname"] = "eth0" |
| 114 | } |
| 115 | if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) { |
| 116 | c["vlan0ports"] = "0 1 2 3 5" |
| 117 | c["vlan1ports"] = "4 5" |
| 118 | } |
| 119 | if (model == "Dell TrueMobile 2300") { |
| 120 | c["lan_ifname"] = "eth0" |
| 121 | c["wan_ifname"] = "eth1" |
| 122 | c["vlan0ports"] = "0 1 2 3 4 5u" |
| 123 | c["vlan1ports"] = "" |
| 124 | } |
| 125 | if (nvram["boardtype"] == "bcm94710r4") { |
| 126 | # Toshiba WRC-1000 |
| 127 | c["lan_ifname"] = "eth0" |
| 128 | c["wan_ifname"] = "eth1" |
| 129 | } |
| 130 | if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) { |
| 131 | c["vlan0ports"] = "0 1 2 3 5" |
| 132 | c["vlan1ports"] = "4 5" |
| 133 | } |
| 134 | if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) { |
| 135 | if (nvram["boardnum"] == "45") { |
| 136 | # WL-500gP |
| 137 | c["vlan0ports"] = "1 2 3 4 5" |
| 138 | c["vlan1ports"] = "0 5" |
| 139 | } else { |
| 140 | # Generic BCM94704 |
| 141 | c["vlan0ports"] = "0 1 2 3 4 5u" |
| 142 | c["vlan1ports"] = "" |
| 143 | c["lan_ifname"] = "eth0" |
| 144 | c["wan_ifname"] = "eth1" |
| 145 | |
| 146 | # MAC addresses on 4704 tend to be screwed up. Add a workaround here |
| 147 | if (nvram["et0macaddr"] ~ mac_check) { |
| 148 | c["lan_macaddr"] = nvram["et0macaddr"] |
| 149 | c["wan_macaddr"] = macinc(c["lan_macaddr"]) |
| 150 | } |
| 151 | } |
| 152 | } |
| 153 | # Buffalo WBR-B11 and Buffalo WBR-G54 |
| 154 | if (nvram["boardtype"] == "bcm94710ap") { |
| 155 | c["vlan0ports"] = "0 1 2 3 4 5u" |
| 156 | c["vlan1ports"] = "" |
| 157 | c["lan_ifname"] = "eth0" |
| 158 | c["wan_ifname"] = "eth1" |
| 159 | } |
| 160 | # generic broadcom 4705/4785 processor with 5397 switch? |
| 161 | # EXCEPT Linksys WRT300N V1.1 |
| 162 | if ((nvram["boardtype"] == "0x478") && \ |
| 163 | (model != "Linksys WRT300N V1.1")) { |
| 164 | c["vlan0ports"] = "1 2 3 4 8*" |
| 165 | c["vlan1ports"] = "0 8" |
| 166 | } |
| 167 | |
| 168 | # generic broadcom 4716 processor with 53115 switch |
| 169 | if (nvram["boardtype"] == "0x04cf") { |
| 170 | c["vlan0ports"] = "1 2 3 4 8*" |
| 171 | c["vlan1ports"] = "0 8" |
| 172 | } |
| 173 | |
| 174 | # WAP54G |
| 175 | if ((nvram["boardnum"] == "2") || \ |
| 176 | (nvram["boardnum"] == "1024")) { |
| 177 | c["lan_ifname"]="eth0" |
| 178 | c["wan_ifname"]="" |
| 179 | } |
| 180 | |
| 181 | # Sitecom WL-105b |
| 182 | if ((nvram["boardum"] == "2") && \ |
| 183 | (nvram["GemtekPmonVer"] == "1")) { |
| 184 | c["lan_ifname"]="eth0" |
| 185 | c["wan_ifname"]="" |
| 186 | } |
| 187 | |
| 188 | # ASUS WL-700gE |
| 189 | # These are actually same as defaults above. For some reason this script applies |
| 190 | # Generic BCM94704 settings instead so we revert to proper settings here. |
| 191 | # Hopefully someone will fix this properly soon. |
| 192 | if (model == "ASUS WL-700gE") { |
| 193 | c["lan_ifname"]="eth0.0" |
| 194 | c["wan_ifname"]="eth0.1" |
| 195 | c["vlan0ports"]="1 2 3 4 5" |
| 196 | c["vlan1ports"]="0 5" |
| 197 | } |
| 198 | if ((model == "Motorola WR850G V2/V3") || (model == "Siemens SE505 V2")) { |
| 199 | c["vlan0ports"]="0 1 2 3 5" |
| 200 | c["vlan1ports"]="4 5" |
| 201 | } |
| 202 | if (model == "ASUS WL-500W") { |
| 203 | c["lan_ifname"] = "eth0" |
| 204 | c["wan_ifname"] = "eth1" |
| 205 | c["vlan0ports"] = "0 1 2 3 4 5u" |
| 206 | c["vlan1ports"] = "" |
| 207 | } |
| 208 | if (model == "OvisLink WL-1600GL") { |
| 209 | c["lan_ifname"] = "eth0.0" |
| 210 | c["wan_ifname"] = "eth0.1" |
| 211 | c["vlan0ports"] = "0 1 2 3 5" |
| 212 | c["vlan1ports"] = "4 5" |
| 213 | } |
| 214 | |
| 215 | if (c["vlan0ports"] || c["vlan1ports"]) { |
| 216 | print "#### VLAN configuration " |
| 217 | print "config switch eth0" |
| 218 | print " option enable 1" |
| 219 | print "" |
| 220 | vlan(0, "vlan0ports") |
| 221 | vlan(1, "vlan1ports") |
| 222 | } |
| 223 | print "#### Loopback configuration" |
| 224 | print "config interface loopback" |
| 225 | print " option ifname \"lo\"" |
| 226 | print " option proto static" |
| 227 | print " option ipaddr 127.0.0.1" |
| 228 | print " option netmask 255.0.0.0" |
| 229 | print "" |
| 230 | print "" |
| 231 | print "#### LAN configuration" |
| 232 | print "config interface lan" |
| 233 | print " option type bridge" |
| 234 | p("ifname", "lan_ifname") |
| 235 | p("macaddr", "lan_macaddr") |
| 236 | print " option proto static" |
| 237 | print " option ipaddr 192.168.1.1" |
| 238 | print " option netmask 255.255.255.0" |
| 239 | print "" |
| 240 | print "" |
| 241 | if (c["wan_ifname"]) { |
| 242 | print "#### WAN configuration" |
| 243 | print "config interface wan" |
| 244 | p("ifname", "wan_ifname") |
| 245 | p("macaddr", "wan_macaddr") |
| 246 | print " option proto dhcp" |
| 247 | } else { |
| 248 | print "#### WAN configuration (disabled)" |
| 249 | print "#config interface wan" |
| 250 | print "# option proto dhcp" |
| 251 | } |
| 252 | }' > /etc/config/network |
| 253 | } |
| 254 | |
