Root/target/linux/brcm63xx/patches-3.6/528-board_nb6.patch

1--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3@@ -17,6 +17,7 @@
4 #include <linux/spi/spi.h>
5 #include <linux/spi/spi_gpio.h>
6 #include <linux/spi/74x164.h>
7+#include <linux/rtl8367.h>
8 #include <asm/addrspace.h>
9 #include <bcm63xx_board.h>
10 #include <bcm63xx_cpu.h>
11@@ -51,6 +52,8 @@
12 #define NB4_SPI_GPIO_MOSI 7
13 #define NB4_SPI_GPIO_CLK 6
14 #define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
15+#define NB6_GPIO_RTL8367_SDA 18
16+#define NB6_GPIO_RTL8367_SCK 20
17 
18 #define CT6373_PID_OFFSET 0xff80
19 #define CT6373_74X164_GPIO_BASE 64
20@@ -2582,6 +2585,103 @@ static struct board_info __initdata boar
21 };
22 #endif
23 
24+#ifdef CONFIG_BCM63XX_CPU_6362
25+static struct rtl8367_extif_config nb6_rtl8367_extif0_cfg = {
26+ .mode = RTL8367_EXTIF_MODE_RGMII,
27+ .txdelay = 1,
28+ .rxdelay = 5,
29+ .ability = {
30+ .force_mode = 1,
31+ .txpause = 1,
32+ .rxpause = 1,
33+ .link = 1,
34+ .duplex = 1,
35+ .speed = RTL8367_PORT_SPEED_1000,
36+ },
37+};
38+
39+static struct rtl8367_platform_data nb6_rtl8367_data = {
40+ .gpio_sda = NB6_GPIO_RTL8367_SDA,
41+ .gpio_sck = NB6_GPIO_RTL8367_SCK,
42+ .extif0_cfg = &nb6_rtl8367_extif0_cfg,
43+};
44+
45+static struct platform_device nb6_rtl8367_device = {
46+ .name = RTL8367_DRIVER_NAME,
47+ .id = -1,
48+ .dev = {
49+ .platform_data = &nb6_rtl8367_data,
50+ }
51+};
52+
53+static struct platform_device * __initdata nb6_devices[] = {
54+ &nb6_rtl8367_device,
55+};
56+
57+static struct board_info __initdata board_nb6 = {
58+ .name = "NB6",
59+ .expected_cpu_id = 0x6362,
60+
61+ .has_uart0 = 1,
62+
63+ .has_ohci0 = 1,
64+ .has_ehci0 = 1,
65+
66+ .has_enetsw = 1,
67+
68+ .enetsw = {
69+ .used_ports = {
70+ [4] = {
71+ .used = 1,
72+ .phy_id = 0xff,
73+ .bypass_link = 1,
74+ .force_speed = 1000,
75+ .force_duplex_full = 1,
76+ .name = "RGMII",
77+ },
78+ },
79+ },
80+
81+ .buttons = {
82+ {
83+ .desc = "reset",
84+ .gpio = 24,
85+ .type = EV_KEY,
86+ .code = KEY_RESTART,
87+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
88+ .active_low = 1,
89+ },
90+ {
91+ .desc = "wps",
92+ .gpio = 25,
93+ .type = EV_KEY,
94+ .code = KEY_WPS_BUTTON,
95+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
96+ .active_low = 1,
97+ },
98+ {
99+ .desc = "wlan",
100+ .gpio = 12,
101+ .type = EV_KEY,
102+ .code = KEY_WLAN,
103+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
104+ .active_low = 1,
105+ },
106+ {
107+ .desc = "service",
108+ .gpio = 10,
109+ .type = EV_KEY,
110+ .code = BTN_0,
111+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
112+ .active_low = 1,
113+ },
114+ },
115+
116+ .devs = nb6_devices,
117+ .num_devs = ARRAY_SIZE(nb6_devices),
118+};
119+#endif
120+
121 /*
122  * known 6368 boards
123  */
124@@ -2778,6 +2878,10 @@ static const struct board_info __initdat
125     &board_DVAG3810BN,
126 #endif
127 
128+#ifdef CONFIG_BCM63XX_CPU_6362
129+ &board_nb6,
130+#endif
131+
132 #ifdef CONFIG_BCM63XX_CPU_6368
133     &board_96368mvwg,
134     &board_96368mvngr,
135@@ -2845,6 +2949,11 @@ static void __init boardid_fixup(u8 *boo
136         }
137     }
138 
139+ if (BCMCPU_IS_6362() && (!strncmp(board_name, "NB6-", sizeof("NB6-") - 1))) {
140+ board_name[sizeof("NB6") - 1] = '\0';
141+ return ;
142+ }
143+
144     /* check if bcm_tag is at 64k offset */
145     if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
146         /* else try 128k */
147

Archive Download this file

Branches:
backfire
history
master
release_2010-11-17
release_2010-12-14
release_2011-02-23
release_2011-05-28
release_2011-08-27
release_2011-11-13
release_2012-03-18
release_2012-04-09
release_2012-10-11
uclibc_nptl



interactive