| 1 | /include/ "vr9.dtsi" |
| 2 | |
| 3 | / { |
| 4 | chosen { |
| 5 | bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; |
| 6 | }; |
| 7 | |
| 8 | memory@0 { |
| 9 | reg = <0x0 0x4000000>; |
| 10 | }; |
| 11 | |
| 12 | fpi@10000000 { |
| 13 | #address-cells = <1>; |
| 14 | #size-cells = <1>; |
| 15 | compatible = "lantiq,fpi", "simple-bus"; |
| 16 | ranges = <0x0 0x10000000 0xEEFFFFF>; |
| 17 | reg = <0x10000000 0xEF00000>; |
| 18 | |
| 19 | localbus@0 { |
| 20 | #address-cells = <2>; |
| 21 | #size-cells = <1>; |
| 22 | compatible = "lantiq,localbus", "simple-bus"; |
| 23 | |
| 24 | }; |
| 25 | |
| 26 | spi@E100800 { |
| 27 | compatible = "lantiq,spi-xway-broken"; |
| 28 | reg = <0xE100800 0x100>; |
| 29 | interrupt-parent = <&icu0>; |
| 30 | interrupts = <22 23 24>; |
| 31 | #address-cells = <1>; |
| 32 | #size-cells = <1>; |
| 33 | |
| 34 | m25p80@0 { |
| 35 | #address-cells = <1>; |
| 36 | #size-cells = <1>; |
| 37 | compatible = "s25fl129p0"; |
| 38 | reg = <0 0>; |
| 39 | linux,modalias = "m25p80", "mx25l3205d"; |
| 40 | spi-max-frequency = <1000000>; |
| 41 | |
| 42 | partition@0 { |
| 43 | reg = <0x0 0x20000>; |
| 44 | label = "SPI (RO) U-Boot Image"; |
| 45 | read-only; |
| 46 | }; |
| 47 | |
| 48 | partition@20000 { |
| 49 | reg = <0x20000 0x10000>; |
| 50 | label = "ENV_MAC"; |
| 51 | read-only; |
| 52 | }; |
| 53 | |
| 54 | partition@30000 { |
| 55 | reg = <0x30000 0x10000>; |
| 56 | label = "DPF"; |
| 57 | read-only; |
| 58 | }; |
| 59 | |
| 60 | partition@40000 { |
| 61 | reg = <0x40000 0x10000>; |
| 62 | label = "NVRAM"; |
| 63 | read-only; |
| 64 | }; |
| 65 | |
| 66 | partition@500000 { |
| 67 | reg = <0x50000 0x003a0000>; |
| 68 | label = "kernel"; |
| 69 | }; |
| 70 | }; |
| 71 | }; |
| 72 | |
| 73 | gpio: pinmux@E100B10 { |
| 74 | compatible = "lantiq,pinctrl-xr9"; |
| 75 | pinctrl-names = "default"; |
| 76 | pinctrl-0 = <&state_default>; |
| 77 | |
| 78 | interrupt-parent = <&icu0>; |
| 79 | interrupts = <166 135 66 40 41 42 38>; |
| 80 | |
| 81 | #gpio-cells = <2>; |
| 82 | gpio-controller; |
| 83 | reg = <0xE100B10 0xA0>; |
| 84 | |
| 85 | state_default: pinmux { |
| 86 | exin3 { |
| 87 | lantiq,groups = "exin3"; |
| 88 | lantiq,function = "exin"; |
| 89 | }; |
| 90 | stp { |
| 91 | lantiq,groups = "stp"; |
| 92 | lantiq,function = "stp"; |
| 93 | }; |
| 94 | spi { |
| 95 | lantiq,groups = "spi", "spi_cs4"; |
| 96 | lantiq,function = "spi"; |
| 97 | }; |
| 98 | nand { |
| 99 | lantiq,groups = "nand cle", "nand ale", |
| 100 | "nand rd", "nand rdy"; |
| 101 | lantiq,function = "ebu"; |
| 102 | }; |
| 103 | mdio { |
| 104 | lantiq,groups = "mdio"; |
| 105 | lantiq,function = "mdio"; |
| 106 | }; |
| 107 | pci { |
| 108 | lantiq,groups = "gnt1", "req1"; |
| 109 | lantiq,function = "pci"; |
| 110 | }; |
| 111 | conf_out { |
| 112 | lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */ |
| 113 | "io4", "io5", "io6", /* stp */ |
| 114 | "io21", |
| 115 | "io33"; |
| 116 | lantiq,open-drain; |
| 117 | lantiq,pull = <0>; |
| 118 | lantiq,output = <1>; |
| 119 | }; |
| 120 | pcie-rst { |
| 121 | lantiq,pins = "io38"; |
| 122 | lantiq,pull = <0>; |
| 123 | lantiq,output = <1>; |
| 124 | }; |
| 125 | conf_in { |
| 126 | lantiq,pins = "io39", /* exin3 */ |
| 127 | "io48"; /* nand rdy */ |
| 128 | lantiq,pull = <2>; |
| 129 | }; |
| 130 | }; |
| 131 | }; |
| 132 | |
| 133 | eth@E108000 { |
| 134 | #address-cells = <1>; |
| 135 | #size-cells = <0>; |
| 136 | compatible = "lantiq,xrx200-net"; |
| 137 | reg = < 0xE108000 0x3000 /* switch */ |
| 138 | 0xE10B100 0x70 /* mdio */ |
| 139 | 0xE10B1D8 0x30 /* mii */ |
| 140 | 0xE10B308 0x30 /* pmac */ |
| 141 | >; |
| 142 | interrupt-parent = <&icu0>; |
| 143 | interrupts = <73 72>; |
| 144 | |
| 145 | lan: interface@0 { |
| 146 | compatible = "lantiq,xrx200-pdi"; |
| 147 | #address-cells = <1>; |
| 148 | #size-cells = <0>; |
| 149 | reg = <0>; |
| 150 | mac-address = [ 00 11 22 33 44 55 ]; |
| 151 | |
| 152 | ethernet@0 { |
| 153 | compatible = "lantiq,xrx200-pdi-port"; |
| 154 | reg = <0>; |
| 155 | phy-mode = "rgmii"; |
| 156 | phy-handle = <&phy0>; |
| 157 | }; |
| 158 | ethernet@1 { |
| 159 | compatible = "lantiq,xrx200-pdi-port"; |
| 160 | reg = <1>; |
| 161 | phy-mode = "rgmii"; |
| 162 | phy-handle = <&phy1>; |
| 163 | }; |
| 164 | ethernet@2 { |
| 165 | compatible = "lantiq,xrx200-pdi-port"; |
| 166 | reg = <2>; |
| 167 | phy-mode = "gmii"; |
| 168 | phy-handle = <&phy11>; |
| 169 | }; |
| 170 | }; |
| 171 | |
| 172 | wan: interface@1 { |
| 173 | compatible = "lantiq,xrx200-pdi"; |
| 174 | #address-cells = <1>; |
| 175 | #size-cells = <0>; |
| 176 | reg = <1>; |
| 177 | mac-address = [ 00 11 22 33 44 56 ]; |
| 178 | lantiq,wan; |
| 179 | ethernet@5 { |
| 180 | compatible = "lantiq,xrx200-pdi-port"; |
| 181 | reg = <5>; |
| 182 | phy-mode = "rgmii"; |
| 183 | phy-handle = <&phy5>; |
| 184 | }; |
| 185 | }; |
| 186 | |
| 187 | test: interface@2 { |
| 188 | compatible = "lantiq,xrx200-pdi"; |
| 189 | #address-cells = <1>; |
| 190 | #size-cells = <0>; |
| 191 | reg = <2>; |
| 192 | mac-address = [ 00 11 22 33 44 57 ]; |
| 193 | ethernet@4 { |
| 194 | compatible = "lantiq,xrx200-pdi-port"; |
| 195 | reg = <4>; |
| 196 | phynmode0 = "gmii"; |
| 197 | phy-handle = <&phy13>; |
| 198 | }; |
| 199 | }; |
| 200 | |
| 201 | mdio@0 { |
| 202 | #address-cells = <1>; |
| 203 | #size-cells = <0>; |
| 204 | compatible = "lantiq,xrx200-mdio"; |
| 205 | phy0: ethernet-phy@0 { |
| 206 | reg = <0x0>; |
| 207 | compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; |
| 208 | lantiq,c45-reg-init = <1 0 0 0>; |
| 209 | }; |
| 210 | phy1: ethernet-phy@1 { |
| 211 | reg = <0x1>; |
| 212 | compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; |
| 213 | lantiq,c45-reg-init = <1 0 0 0>; |
| 214 | }; |
| 215 | phy5: ethernet-phy@5 { |
| 216 | reg = <0x5>; |
| 217 | compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; |
| 218 | lantiq,c45-reg-init = <1 0 0 0>; |
| 219 | }; |
| 220 | phy11: ethernet-phy@11 { |
| 221 | reg = <0x11>; |
| 222 | compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; |
| 223 | lantiq,c45-reg-init = <1 0 0 0>; |
| 224 | }; |
| 225 | phy13: ethernet-phy@13 { |
| 226 | reg = <0x13>; |
| 227 | compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; |
| 228 | lantiq,c45-reg-init = <1 0 0 0>; |
| 229 | }; |
| 230 | }; |
| 231 | }; |
| 232 | |
| 233 | stp: stp@E100BB0 { |
| 234 | compatible = "lantiq,gpio-stp-xway"; |
| 235 | reg = <0xE100BB0 0x40>; |
| 236 | #gpio-cells = <2>; |
| 237 | gpio-controller; |
| 238 | |
| 239 | lantiq,shadow = <0xffff>; |
| 240 | lantiq,groups = <0x7>; |
| 241 | lantiq,dsl = <0x3>; |
| 242 | lantiq,phy1 = <0x7>; |
| 243 | lantiq,phy2 = <0x7>; |
| 244 | /* lantiq,rising; */ |
| 245 | }; |
| 246 | |
| 247 | ifxhcd@E101000 { |
| 248 | status = "okay"; |
| 249 | gpios = <&gpio 33 0>; |
| 250 | lantiq,portmask = <0x3>; |
| 251 | }; |
| 252 | |
| 253 | pci@E105400 { |
| 254 | #address-cells = <3>; |
| 255 | #size-cells = <2>; |
| 256 | #interrupt-cells = <1>; |
| 257 | compatible = "lantiq,pci-xway1"; |
| 258 | bus-range = <0x0 0x0>; |
| 259 | ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ |
| 260 | 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ |
| 261 | reg = <0x7000000 0x8000 /* config space */ |
| 262 | 0xE105400 0x400>; /* pci bridge */ |
| 263 | lantiq,bus-clock = <33333333>; |
| 264 | /*lantiq,external-clock;*/ |
| 265 | lantiq,delay-hi = <0>; /* 0ns delay */ |
| 266 | lantiq,delay-lo = <0>; /* 0.0ns delay */ |
| 267 | interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| 268 | interrupt-map = < |
| 269 | 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29 |
| 270 | >; |
| 271 | gpios-reset = <&gpio 21 0>; |
| 272 | req-mask = <0x1>; /* GNT1 */ |
| 273 | }; |
| 274 | }; |
| 275 | |
| 276 | gphy-xrx200 { |
| 277 | compatible = "lantiq,phy-xrx200"; |
| 278 | firmware = "lantiq/vr9_phy11g_a2x.bin"; |
| 279 | phys = [ 00 01 ]; |
| 280 | }; |
| 281 | |
| 282 | gpio-keys-polled { |
| 283 | compatible = "gpio-keys-polled"; |
| 284 | #address-cells = <1>; |
| 285 | #size-cells = <0>; |
| 286 | poll-interval = <100>; |
| 287 | reset { |
| 288 | label = "reset"; |
| 289 | gpios = <&gpio 7 1>; |
| 290 | linux,code = <0x198>; |
| 291 | }; |
| 292 | paging { |
| 293 | label = "paging"; |
| 294 | gpios = <&gpio 11 1>; |
| 295 | linux,code = <0x100>; |
| 296 | }; |
| 297 | }; |
| 298 | |
| 299 | /* gpio-keys { |
| 300 | compatible = "gpio-keys"; |
| 301 | wps { |
| 302 | gpios = <&gpio 2 0>; |
| 303 | linux,code = <0x100>; |
| 304 | }; |
| 305 | };*/ |
| 306 | |
| 307 | gpio-leds { |
| 308 | compatible = "gpio-leds"; |
| 309 | |
| 310 | power { |
| 311 | label = "power"; |
| 312 | gpios = <&stp 9 0>; |
| 313 | default-state = "on"; |
| 314 | }; |
| 315 | warning { |
| 316 | label = "warning"; |
| 317 | gpios = <&stp 22 0>; |
| 318 | }; |
| 319 | fxs1 { |
| 320 | label = "fxs1"; |
| 321 | gpios = <&stp 21 0>; |
| 322 | }; |
| 323 | fxs2 { |
| 324 | label = "fxs2"; |
| 325 | gpios = <&stp 20 0>; |
| 326 | }; |
| 327 | fxo { |
| 328 | label = "fxo"; |
| 329 | gpios = <&stp 19 0>; |
| 330 | }; |
| 331 | usb1 { |
| 332 | label = "usb1"; |
| 333 | gpios = <&stp 18 0>; |
| 334 | }; |
| 335 | usb2 { |
| 336 | label = "usb2"; |
| 337 | gpios = <&stp 15 0>; |
| 338 | }; |
| 339 | sd { |
| 340 | label = "sd"; |
| 341 | gpios = <&stp 14 0>; |
| 342 | }; |
| 343 | wps { |
| 344 | label = "wps"; |
| 345 | gpios = <&stp 12 0>; |
| 346 | }; |
| 347 | }; |
| 348 | }; |
| 349 | |
