| 1 | /dts-v1/; |
| 2 | |
| 3 | /include/ "ar9.dtsi" |
| 4 | |
| 5 | / { |
| 6 | model = "WBMR - Buffalo WBMR-HP-G300H"; |
| 7 | |
| 8 | chosen { |
| 9 | bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; |
| 10 | }; |
| 11 | |
| 12 | memory@0 { |
| 13 | reg = <0x0 0x4000000>; |
| 14 | }; |
| 15 | |
| 16 | fpi@10000000 { |
| 17 | localbus@0 { |
| 18 | nor-boot@0 { |
| 19 | compatible = "lantiq,nor"; |
| 20 | bank-width = <2>; |
| 21 | reg = <0 0x0 0x2000000>; |
| 22 | #address-cells = <1>; |
| 23 | #size-cells = <1>; |
| 24 | |
| 25 | partition@0 { |
| 26 | label = "uboot"; |
| 27 | reg = <0x00000 0x40000>; |
| 28 | read-only; |
| 29 | }; |
| 30 | |
| 31 | partition@40000 { |
| 32 | label = "uboot_env"; |
| 33 | reg = <0x40000 0x20000>; |
| 34 | read-only; |
| 35 | }; |
| 36 | |
| 37 | partition@20000 { |
| 38 | label = "linux"; |
| 39 | reg = <0x60000 0x1f20000>; |
| 40 | }; |
| 41 | |
| 42 | partition@0x1fc0000 { |
| 43 | label = "board"; |
| 44 | reg = <0x1fc0000 0x20000>; |
| 45 | read-only; |
| 46 | }; |
| 47 | |
| 48 | partition@0x1fe0000 { |
| 49 | label = "calibration"; |
| 50 | reg = <0x1fe0000 0x20000>; |
| 51 | read-only; |
| 52 | }; |
| 53 | }; |
| 54 | |
| 55 | mac_addr { |
| 56 | compatible = "lantiq,eth-mac"; |
| 57 | reg = <0 0x1fd0024 0x6>; |
| 58 | }; |
| 59 | }; |
| 60 | |
| 61 | gpio: pinmux@E100B10 { |
| 62 | pinctrl-names = "default"; |
| 63 | pinctrl-0 = <&state_default>; |
| 64 | |
| 65 | state_default: pinmux { |
| 66 | pci-in { |
| 67 | lantiq,groups = "req1"; |
| 68 | lantiq,output = <0>; |
| 69 | lantiq,open-drain = <1>; |
| 70 | lantiq,pull = <2>; |
| 71 | }; |
| 72 | pci-out { |
| 73 | lantiq,groups = "gnt1"; |
| 74 | lantiq,output = <1>; |
| 75 | lantiq,pull = <0>; |
| 76 | }; |
| 77 | pci_rst { |
| 78 | lantiq,pins = "io21"; |
| 79 | lantiq,pull = <0>; |
| 80 | lantiq,output = <1>; |
| 81 | }; |
| 82 | }; |
| 83 | }; |
| 84 | |
| 85 | etop@E180000 { |
| 86 | phy-mode = "rgmii"; |
| 87 | }; |
| 88 | |
| 89 | ifxhcd@E101000 { |
| 90 | status = "okay"; |
| 91 | gpios = <&gpio 36 0>; |
| 92 | }; |
| 93 | |
| 94 | pci@E105400 { |
| 95 | status = "okay"; |
| 96 | }; |
| 97 | }; |
| 98 | |
| 99 | gpio-keys-polled { |
| 100 | compatible = "gpio-keys-polled"; |
| 101 | #address-cells = <1>; |
| 102 | #size-cells = <0>; |
| 103 | poll-interval = <100>; |
| 104 | |
| 105 | wps { |
| 106 | label = "wps"; |
| 107 | gpios = <&gpio 0 1>; |
| 108 | linux,code = <0x211>; |
| 109 | }; |
| 110 | reset { |
| 111 | label = "reset"; |
| 112 | gpios = <&gpio 37 1>; |
| 113 | linux,code = <0x198>; |
| 114 | }; |
| 115 | eject { |
| 116 | label = "eject"; |
| 117 | gpios = <&gpio 34 1>; |
| 118 | linux,code = <0xf7>; |
| 119 | }; |
| 120 | movie { |
| 121 | label = "movie"; |
| 122 | gpios = <&gpio 22 1>; |
| 123 | linux,code = <0x109>; |
| 124 | }; |
| 125 | }; |
| 126 | |
| 127 | gpio-leds { |
| 128 | compatible = "gpio-leds"; |
| 129 | power { |
| 130 | label = "power"; |
| 131 | gpios = <&gpio 1 1>; |
| 132 | }; |
| 133 | power2 { |
| 134 | label = "power2"; |
| 135 | gpios = <&gpio 5 1>; |
| 136 | }; |
| 137 | security { |
| 138 | label = "security"; |
| 139 | gpios = <&gpio 14 1>; |
| 140 | }; |
| 141 | wifi { |
| 142 | label = "wifi"; |
| 143 | gpios = <&gpio 15 1>; |
| 144 | }; |
| 145 | dsl { |
| 146 | label = "dsl"; |
| 147 | gpios = <&gpio 16 1>; |
| 148 | }; |
| 149 | online { |
| 150 | label = "online"; |
| 151 | gpios = <&gpio 17 1>; |
| 152 | }; |
| 153 | online2 { |
| 154 | label = "online2"; |
| 155 | gpios = <&gpio 18 1>; |
| 156 | }; |
| 157 | movie { |
| 158 | label = "movie"; |
| 159 | gpios = <&gpio 20 1>; |
| 160 | }; |
| 161 | usb { |
| 162 | label = "usb"; |
| 163 | gpios = <&gpio 28 1>; |
| 164 | default-state = "on"; |
| 165 | }; |
| 166 | }; |
| 167 | }; |
| 168 | |
