| 1 | --- |
| 2 | drivers/bluetooth/Kconfig | 10 |
| 3 | drivers/bluetooth/Makefile | 1 |
| 4 | drivers/bluetooth/hci_h4p/Makefile | 7 |
| 5 | drivers/bluetooth/hci_h4p/core.c | 1043 ++++++++++++++++++++++++++++++++++++ |
| 6 | drivers/bluetooth/hci_h4p/fw-csr.c | 149 +++++ |
| 7 | drivers/bluetooth/hci_h4p/fw-ti.c | 90 +++ |
| 8 | drivers/bluetooth/hci_h4p/fw.c | 155 +++++ |
| 9 | drivers/bluetooth/hci_h4p/hci_h4p.h | 183 ++++++ |
| 10 | drivers/bluetooth/hci_h4p/sysfs.c | 84 ++ |
| 11 | drivers/bluetooth/hci_h4p/uart.c | 169 +++++ |
| 12 | 10 files changed, 1891 insertions(+) |
| 13 | |
| 14 | --- /dev/null |
| 15 | +++ b/drivers/bluetooth/hci_h4p/core.c |
| 16 | @@ -0,0 +1,1043 @@ |
| 17 | +/* |
| 18 | + * This file is part of hci_h4p bluetooth driver |
| 19 | + * |
| 20 | + * Copyright (C) 2005, 2006 Nokia Corporation. |
| 21 | + * |
| 22 | + * Contact: Ville Tervo <ville.tervo@nokia.com> |
| 23 | + * |
| 24 | + * This program is free software; you can redistribute it and/or |
| 25 | + * modify it under the terms of the GNU General Public License |
| 26 | + * version 2 as published by the Free Software Foundation. |
| 27 | + * |
| 28 | + * This program is distributed in the hope that it will be useful, but |
| 29 | + * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 30 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 31 | + * General Public License for more details. |
| 32 | + * |
| 33 | + * You should have received a copy of the GNU General Public License |
| 34 | + * along with this program; if not, write to the Free Software |
| 35 | + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 36 | + * 02110-1301 USA |
| 37 | + * |
| 38 | + */ |
| 39 | + |
| 40 | +#include <linux/module.h> |
| 41 | + |
| 42 | +#include <linux/kernel.h> |
| 43 | +#include <linux/init.h> |
| 44 | +#include <linux/errno.h> |
| 45 | +#include <linux/delay.h> |
| 46 | +#include <linux/spinlock.h> |
| 47 | +#include <linux/serial_reg.h> |
| 48 | +#include <linux/skbuff.h> |
| 49 | +#include <linux/timer.h> |
| 50 | +#include <linux/device.h> |
| 51 | +#include <linux/platform_device.h> |
| 52 | +#include <linux/clk.h> |
| 53 | +#include <linux/gpio.h> |
| 54 | + |
| 55 | +#include <mach/hardware.h> |
| 56 | +#include <mach/board.h> |
| 57 | +#include <mach/irqs.h> |
| 58 | +#include <plat/serial.h> |
| 59 | + |
| 60 | +#include <net/bluetooth/bluetooth.h> |
| 61 | +#include <net/bluetooth/hci_core.h> |
| 62 | +#include <net/bluetooth/hci.h> |
| 63 | + |
| 64 | +#include "hci_h4p.h" |
| 65 | + |
| 66 | +#define PM_TIMEOUT 200 |
| 67 | + |
| 68 | +struct omap_bluetooth_config { |
| 69 | + u8 chip_type; |
| 70 | + u8 bt_wakeup_gpio; |
| 71 | + u8 host_wakeup_gpio; |
| 72 | + u8 reset_gpio; |
| 73 | + u8 bt_uart; |
| 74 | + u8 bd_addr[6]; |
| 75 | + u8 bt_sysclk; |
| 76 | +}; |
| 77 | + |
| 78 | +/* This should be used in function that cannot release clocks */ |
| 79 | +static void hci_h4p_set_clk(struct hci_h4p_info *info, int *clock, int enable) |
| 80 | +{ |
| 81 | + unsigned long flags; |
| 82 | + |
| 83 | + spin_lock_irqsave(&info->clocks_lock, flags); |
| 84 | + if (enable && !*clock) { |
| 85 | + NBT_DBG_POWER("Enabling %p\n", clock); |
| 86 | + clk_enable(info->uart_fclk); |
| 87 | +#ifdef CONFIG_ARCH_OMAP2 |
| 88 | + if (cpu_is_omap24xx()) { |
| 89 | + clk_enable(info->uart_iclk); |
| 90 | + //omap2_block_sleep(); |
| 91 | + } |
| 92 | +#endif |
| 93 | + } |
| 94 | + if (!enable && *clock) { |
| 95 | + NBT_DBG_POWER("Disabling %p\n", clock); |
| 96 | + clk_disable(info->uart_fclk); |
| 97 | +#ifdef CONFIG_ARCH_OMAP2 |
| 98 | + if (cpu_is_omap24xx()) { |
| 99 | + clk_disable(info->uart_iclk); |
| 100 | + //omap2_allow_sleep(); |
| 101 | + } |
| 102 | +#endif |
| 103 | + } |
| 104 | + |
| 105 | + *clock = enable; |
| 106 | + spin_unlock_irqrestore(&info->clocks_lock, flags); |
| 107 | +} |
| 108 | + |
| 109 | +/* Power management functions */ |
| 110 | +static void hci_h4p_disable_tx(struct hci_h4p_info *info) |
| 111 | +{ |
| 112 | + NBT_DBG_POWER("\n"); |
| 113 | + |
| 114 | + if (!info->pm_enabled) |
| 115 | + return; |
| 116 | + |
| 117 | + mod_timer(&info->tx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT)); |
| 118 | +} |
| 119 | + |
| 120 | +static void hci_h4p_enable_tx(struct hci_h4p_info *info) |
| 121 | +{ |
| 122 | + NBT_DBG_POWER("\n"); |
| 123 | + |
| 124 | + if (!info->pm_enabled) |
| 125 | + return; |
| 126 | + |
| 127 | + del_timer_sync(&info->tx_pm_timer); |
| 128 | + if (info->tx_pm_enabled) { |
| 129 | + info->tx_pm_enabled = 0; |
| 130 | + hci_h4p_set_clk(info, &info->tx_clocks_en, 1); |
| 131 | + gpio_set_value(info->bt_wakeup_gpio, 1); |
| 132 | + } |
| 133 | +} |
| 134 | + |
| 135 | +static void hci_h4p_tx_pm_timer(unsigned long data) |
| 136 | +{ |
| 137 | + struct hci_h4p_info *info; |
| 138 | + |
| 139 | + NBT_DBG_POWER("\n"); |
| 140 | + |
| 141 | + info = (struct hci_h4p_info *)data; |
| 142 | + |
| 143 | + if (hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT) { |
| 144 | + gpio_set_value(info->bt_wakeup_gpio, 0); |
| 145 | + hci_h4p_set_clk(info, &info->tx_clocks_en, 0); |
| 146 | + info->tx_pm_enabled = 1; |
| 147 | + } |
| 148 | + else { |
| 149 | + mod_timer(&info->tx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT)); |
| 150 | + } |
| 151 | +} |
| 152 | + |
| 153 | +static void hci_h4p_disable_rx(struct hci_h4p_info *info) |
| 154 | +{ |
| 155 | + if (!info->pm_enabled) |
| 156 | + return; |
| 157 | + |
| 158 | + mod_timer(&info->rx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT)); |
| 159 | +} |
| 160 | + |
| 161 | +static void hci_h4p_enable_rx(struct hci_h4p_info *info) |
| 162 | +{ |
| 163 | + unsigned long flags; |
| 164 | + |
| 165 | + if (!info->pm_enabled) |
| 166 | + return; |
| 167 | + |
| 168 | + del_timer_sync(&info->rx_pm_timer); |
| 169 | + spin_lock_irqsave(&info->lock, flags); |
| 170 | + if (info->rx_pm_enabled) { |
| 171 | + hci_h4p_set_clk(info, &info->rx_clocks_en, 1); |
| 172 | + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | UART_IER_RDI); |
| 173 | + __hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_RTS); |
| 174 | + info->rx_pm_enabled = 0; |
| 175 | + } |
| 176 | + spin_unlock_irqrestore(&info->lock, flags); |
| 177 | +} |
| 178 | + |
| 179 | +static void hci_h4p_rx_pm_timer(unsigned long data) |
| 180 | +{ |
| 181 | + unsigned long flags; |
| 182 | + struct hci_h4p_info *info = (struct hci_h4p_info *)data; |
| 183 | + |
| 184 | + spin_lock_irqsave(&info->lock, flags); |
| 185 | + if (!(hci_h4p_inb(info, UART_LSR) & UART_LSR_DR)) { |
| 186 | + __hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_RTS); |
| 187 | + hci_h4p_set_rts(info, 0); |
| 188 | + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) & ~UART_IER_RDI); |
| 189 | + hci_h4p_set_clk(info, &info->rx_clocks_en, 0); |
| 190 | + info->rx_pm_enabled = 1; |
| 191 | + } |
| 192 | + else { |
| 193 | + mod_timer(&info->rx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT)); |
| 194 | + } |
| 195 | + spin_unlock_irqrestore(&info->lock, flags); |
| 196 | +} |
| 197 | + |
| 198 | +/* Negotiation functions */ |
| 199 | +int hci_h4p_send_alive_packet(struct hci_h4p_info *info) |
| 200 | +{ |
| 201 | + NBT_DBG("Sending alive packet\n"); |
| 202 | + |
| 203 | + if (!info->alive_cmd_skb) |
| 204 | + return -EINVAL; |
| 205 | + |
| 206 | + /* Keep reference to buffer so we can reuse it */ |
| 207 | + info->alive_cmd_skb = skb_get(info->alive_cmd_skb); |
| 208 | + |
| 209 | + skb_queue_tail(&info->txq, info->alive_cmd_skb); |
| 210 | + tasklet_schedule(&info->tx_task); |
| 211 | + |
| 212 | + NBT_DBG("Alive packet sent\n"); |
| 213 | + |
| 214 | + return 0; |
| 215 | +} |
| 216 | + |
| 217 | +static void hci_h4p_alive_packet(struct hci_h4p_info *info, struct sk_buff *skb) |
| 218 | +{ |
| 219 | + NBT_DBG("Received alive packet\n"); |
| 220 | + if (skb->data[1] == 0xCC) { |
| 221 | + complete(&info->init_completion); |
| 222 | + } |
| 223 | + |
| 224 | + kfree_skb(skb); |
| 225 | +} |
| 226 | + |
| 227 | +static int hci_h4p_send_negotiation(struct hci_h4p_info *info, struct sk_buff *skb) |
| 228 | +{ |
| 229 | + NBT_DBG("Sending negotiation..\n"); |
| 230 | + |
| 231 | + hci_h4p_change_speed(info, INIT_SPEED); |
| 232 | + |
| 233 | + info->init_error = 0; |
| 234 | + init_completion(&info->init_completion); |
| 235 | + skb_queue_tail(&info->txq, skb); |
| 236 | + tasklet_schedule(&info->tx_task); |
| 237 | + |
| 238 | + if (!wait_for_completion_interruptible_timeout(&info->init_completion, |
| 239 | + msecs_to_jiffies(1000))) |
| 240 | + return -ETIMEDOUT; |
| 241 | + |
| 242 | + NBT_DBG("Negotiation sent\n"); |
| 243 | + return info->init_error; |
| 244 | +} |
| 245 | + |
| 246 | +static void hci_h4p_negotiation_packet(struct hci_h4p_info *info, |
| 247 | + struct sk_buff *skb) |
| 248 | +{ |
| 249 | + int err = 0; |
| 250 | + |
| 251 | + if (skb->data[1] == 0x20) { |
| 252 | + /* Change to operational settings */ |
| 253 | + hci_h4p_set_rts(info, 0); |
| 254 | + |
| 255 | + err = hci_h4p_wait_for_cts(info, 0, 100); |
| 256 | + if (err < 0) |
| 257 | + goto neg_ret; |
| 258 | + |
| 259 | + hci_h4p_change_speed(info, MAX_BAUD_RATE); |
| 260 | + |
| 261 | + err = hci_h4p_wait_for_cts(info, 1, 100); |
| 262 | + if (err < 0) |
| 263 | + goto neg_ret; |
| 264 | + |
| 265 | + hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_CTS | UART_EFR_RTS); |
| 266 | + |
| 267 | + err = hci_h4p_send_alive_packet(info); |
| 268 | + if (err < 0) |
| 269 | + goto neg_ret; |
| 270 | + } else { |
| 271 | + dev_err(info->dev, "Could not negotiate hci_h4p settings\n"); |
| 272 | + err = -EINVAL; |
| 273 | + goto neg_ret; |
| 274 | + } |
| 275 | + |
| 276 | + kfree_skb(skb); |
| 277 | + return; |
| 278 | + |
| 279 | +neg_ret: |
| 280 | + info->init_error = err; |
| 281 | + complete(&info->init_completion); |
| 282 | + kfree_skb(skb); |
| 283 | +} |
| 284 | + |
| 285 | +/* H4 packet handling functions */ |
| 286 | +static int hci_h4p_get_hdr_len(struct hci_h4p_info *info, u8 pkt_type) |
| 287 | +{ |
| 288 | + long retval; |
| 289 | + |
| 290 | + switch (pkt_type) { |
| 291 | + case H4_EVT_PKT: |
| 292 | + retval = HCI_EVENT_HDR_SIZE; |
| 293 | + break; |
| 294 | + case H4_ACL_PKT: |
| 295 | + retval = HCI_ACL_HDR_SIZE; |
| 296 | + break; |
| 297 | + case H4_SCO_PKT: |
| 298 | + retval = HCI_SCO_HDR_SIZE; |
| 299 | + break; |
| 300 | + case H4_NEG_PKT: |
| 301 | + retval = 11; |
| 302 | + break; |
| 303 | + case H4_ALIVE_PKT: |
| 304 | + retval = 3; |
| 305 | + break; |
| 306 | + default: |
| 307 | + dev_err(info->dev, "Unknown H4 packet type 0x%.2x\n", pkt_type); |
| 308 | + retval = -1; |
| 309 | + break; |
| 310 | + } |
| 311 | + |
| 312 | + return retval; |
| 313 | +} |
| 314 | + |
| 315 | +static unsigned int hci_h4p_get_data_len(struct hci_h4p_info *info, |
| 316 | + struct sk_buff *skb) |
| 317 | +{ |
| 318 | + long retval = -1; |
| 319 | + struct hci_event_hdr *evt_hdr; |
| 320 | + struct hci_acl_hdr *acl_hdr; |
| 321 | + struct hci_sco_hdr *sco_hdr; |
| 322 | + |
| 323 | + switch (bt_cb(skb)->pkt_type) { |
| 324 | + case H4_EVT_PKT: |
| 325 | + evt_hdr = (struct hci_event_hdr *)skb->data; |
| 326 | + retval = evt_hdr->plen; |
| 327 | + break; |
| 328 | + case H4_ACL_PKT: |
| 329 | + acl_hdr = (struct hci_acl_hdr *)skb->data; |
| 330 | + retval = le16_to_cpu(acl_hdr->dlen); |
| 331 | + break; |
| 332 | + case H4_SCO_PKT: |
| 333 | + sco_hdr = (struct hci_sco_hdr *)skb->data; |
| 334 | + retval = sco_hdr->dlen; |
| 335 | + break; |
| 336 | + case H4_NEG_PKT: |
| 337 | + retval = 0; |
| 338 | + break; |
| 339 | + case H4_ALIVE_PKT: |
| 340 | + retval = 0; |
| 341 | + break; |
| 342 | + } |
| 343 | + |
| 344 | + return retval; |
| 345 | +} |
| 346 | + |
| 347 | +static inline void hci_h4p_recv_frame(struct hci_h4p_info *info, |
| 348 | + struct sk_buff *skb) |
| 349 | +{ |
| 350 | + |
| 351 | + if (unlikely(!test_bit(HCI_RUNNING, &info->hdev->flags))) { |
| 352 | + NBT_DBG("fw_event\n"); |
| 353 | + hci_h4p_parse_fw_event(info, skb); |
| 354 | + } else { |
| 355 | + hci_recv_frame(skb); |
| 356 | + NBT_DBG("Frame sent to upper layer\n"); |
| 357 | + } |
| 358 | +} |
| 359 | + |
| 360 | +static void hci_h4p_rx_tasklet(unsigned long data) |
| 361 | +{ |
| 362 | + u8 byte; |
| 363 | + unsigned long flags; |
| 364 | + struct hci_h4p_info *info = (struct hci_h4p_info *)data; |
| 365 | + |
| 366 | + NBT_DBG("tasklet woke up\n"); |
| 367 | + NBT_DBG_TRANSFER("rx_tasklet woke up\ndata "); |
| 368 | + |
| 369 | + while (hci_h4p_inb(info, UART_LSR) & UART_LSR_DR) { |
| 370 | + byte = hci_h4p_inb(info, UART_RX); |
| 371 | + if (info->garbage_bytes) { |
| 372 | + info->garbage_bytes--; |
| 373 | + continue; |
| 374 | + } |
| 375 | + if (info->rx_skb == NULL) { |
| 376 | + info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC | GFP_DMA); |
| 377 | + if (!info->rx_skb) { |
| 378 | + dev_err(info->dev, "Can't allocate memory for new packet\n"); |
| 379 | + goto finish_task; |
| 380 | + } |
| 381 | + info->rx_state = WAIT_FOR_PKT_TYPE; |
| 382 | + info->rx_skb->dev = (void *)info->hdev; |
| 383 | + } |
| 384 | + info->hdev->stat.byte_rx++; |
| 385 | + NBT_DBG_TRANSFER_NF("0x%.2x ", byte); |
| 386 | + switch (info->rx_state) { |
| 387 | + case WAIT_FOR_PKT_TYPE: |
| 388 | + bt_cb(info->rx_skb)->pkt_type = byte; |
| 389 | + info->rx_count = hci_h4p_get_hdr_len(info, byte); |
| 390 | + if (info->rx_count < 0) { |
| 391 | + info->hdev->stat.err_rx++; |
| 392 | + kfree_skb(info->rx_skb); |
| 393 | + info->rx_skb = NULL; |
| 394 | + } else { |
| 395 | + info->rx_state = WAIT_FOR_HEADER; |
| 396 | + } |
| 397 | + break; |
| 398 | + case WAIT_FOR_HEADER: |
| 399 | + info->rx_count--; |
| 400 | + *skb_put(info->rx_skb, 1) = byte; |
| 401 | + if (info->rx_count == 0) { |
| 402 | + info->rx_count = hci_h4p_get_data_len(info, info->rx_skb); |
| 403 | + if (info->rx_count > skb_tailroom(info->rx_skb)) { |
| 404 | + dev_err(info->dev, "Frame is %ld bytes too long.\n", |
| 405 | + info->rx_count - skb_tailroom(info->rx_skb)); |
| 406 | + kfree_skb(info->rx_skb); |
| 407 | + info->rx_skb = NULL; |
| 408 | + info->garbage_bytes = info->rx_count - skb_tailroom(info->rx_skb); |
| 409 | + break; |
| 410 | + } |
| 411 | + info->rx_state = WAIT_FOR_DATA; |
| 412 | + |
| 413 | + if (bt_cb(info->rx_skb)->pkt_type == H4_NEG_PKT) { |
| 414 | + hci_h4p_negotiation_packet(info, info->rx_skb); |
| 415 | + info->rx_skb = NULL; |
| 416 | + info->rx_state = WAIT_FOR_PKT_TYPE; |
| 417 | + goto finish_task; |
| 418 | + } |
| 419 | + if (bt_cb(info->rx_skb)->pkt_type == H4_ALIVE_PKT) { |
| 420 | + hci_h4p_alive_packet(info, info->rx_skb); |
| 421 | + info->rx_skb = NULL; |
| 422 | + info->rx_state = WAIT_FOR_PKT_TYPE; |
| 423 | + goto finish_task; |
| 424 | + } |
| 425 | + } |
| 426 | + break; |
| 427 | + case WAIT_FOR_DATA: |
| 428 | + info->rx_count--; |
| 429 | + *skb_put(info->rx_skb, 1) = byte; |
| 430 | + if (info->rx_count == 0) { |
| 431 | + /* H4+ devices should allways send word aligned packets */ |
| 432 | + if (!(info->rx_skb->len % 2)) { |
| 433 | + info->garbage_bytes++; |
| 434 | + } |
| 435 | + hci_h4p_recv_frame(info, info->rx_skb); |
| 436 | + info->rx_skb = NULL; |
| 437 | + } |
| 438 | + break; |
| 439 | + default: |
| 440 | + WARN_ON(1); |
| 441 | + break; |
| 442 | + } |
| 443 | + } |
| 444 | + |
| 445 | +finish_task: |
| 446 | + spin_lock_irqsave(&info->lock, flags); |
| 447 | + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | UART_IER_RDI); |
| 448 | + spin_unlock_irqrestore(&info->lock, flags); |
| 449 | + |
| 450 | + NBT_DBG_TRANSFER_NF("\n"); |
| 451 | + NBT_DBG("rx_ended\n"); |
| 452 | +} |
| 453 | + |
| 454 | +static void hci_h4p_tx_tasklet(unsigned long data) |
| 455 | +{ |
| 456 | + unsigned int sent = 0; |
| 457 | + unsigned long flags; |
| 458 | + struct sk_buff *skb; |
| 459 | + struct hci_h4p_info *info = (struct hci_h4p_info *)data; |
| 460 | + |
| 461 | + NBT_DBG("tasklet woke up\n"); |
| 462 | + NBT_DBG_TRANSFER("tx_tasklet woke up\n data "); |
| 463 | + |
| 464 | + skb = skb_dequeue(&info->txq); |
| 465 | + if (!skb) { |
| 466 | + /* No data in buffer */ |
| 467 | + NBT_DBG("skb ready\n"); |
| 468 | + hci_h4p_disable_tx(info); |
| 469 | + return; |
| 470 | + } |
| 471 | + |
| 472 | + /* Copy data to tx fifo */ |
| 473 | + while (!(hci_h4p_inb(info, UART_OMAP_SSR) & UART_OMAP_SSR_TXFULL) && |
| 474 | + (sent < skb->len)) { |
| 475 | + NBT_DBG_TRANSFER_NF("0x%.2x ", skb->data[sent]); |
| 476 | + hci_h4p_outb(info, UART_TX, skb->data[sent]); |
| 477 | + sent++; |
| 478 | + } |
| 479 | + |
| 480 | + info->hdev->stat.byte_tx += sent; |
| 481 | + NBT_DBG_TRANSFER_NF("\n"); |
| 482 | + if (skb->len == sent) { |
| 483 | + kfree_skb(skb); |
| 484 | + } else { |
| 485 | + skb_pull(skb, sent); |
| 486 | + skb_queue_head(&info->txq, skb); |
| 487 | + } |
| 488 | + |
| 489 | + spin_lock_irqsave(&info->lock, flags); |
| 490 | + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | UART_IER_THRI); |
| 491 | + spin_unlock_irqrestore(&info->lock, flags); |
| 492 | +} |
| 493 | + |
| 494 | +static irqreturn_t hci_h4p_interrupt(int irq, void *data) |
| 495 | +{ |
| 496 | + struct hci_h4p_info *info = (struct hci_h4p_info *)data; |
| 497 | + u8 iir, msr; |
| 498 | + int ret; |
| 499 | + unsigned long flags; |
| 500 | + |
| 501 | + ret = IRQ_NONE; |
| 502 | + |
| 503 | + iir = hci_h4p_inb(info, UART_IIR); |
| 504 | + if (iir & UART_IIR_NO_INT) { |
| 505 | + dev_err(info->dev, "Interrupt but no reason irq 0x%.2x\n", iir); |
| 506 | + return IRQ_HANDLED; |
| 507 | + } |
| 508 | + |
| 509 | + NBT_DBG("In interrupt handler iir 0x%.2x\n", iir); |
| 510 | + |
| 511 | + iir &= UART_IIR_ID; |
| 512 | + |
| 513 | + if (iir == UART_IIR_MSI) { |
| 514 | + msr = hci_h4p_inb(info, UART_MSR); |
| 515 | + ret = IRQ_HANDLED; |
| 516 | + } |
| 517 | + if (iir == UART_IIR_RLSI) { |
| 518 | + hci_h4p_inb(info, UART_RX); |
| 519 | + hci_h4p_inb(info, UART_LSR); |
| 520 | + ret = IRQ_HANDLED; |
| 521 | + } |
| 522 | + |
| 523 | + if (iir == UART_IIR_RDI) { |
| 524 | + spin_lock_irqsave(&info->lock, flags); |
| 525 | + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) & ~UART_IER_RDI); |
| 526 | + spin_unlock_irqrestore(&info->lock, flags); |
| 527 | + tasklet_schedule(&info->rx_task); |
| 528 | + ret = IRQ_HANDLED; |
| 529 | + } |
| 530 | + |
| 531 | + if (iir == UART_IIR_THRI) { |
| 532 | + spin_lock_irqsave(&info->lock, flags); |
| 533 | + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) & ~UART_IER_THRI); |
| 534 | + spin_unlock_irqrestore(&info->lock, flags); |
| 535 | + tasklet_schedule(&info->tx_task); |
| 536 | + ret = IRQ_HANDLED; |
| 537 | + } |
| 538 | + |
| 539 | + return ret; |
| 540 | +} |
| 541 | + |
| 542 | +static irqreturn_t hci_h4p_wakeup_interrupt(int irq, void *dev_inst) |
| 543 | +{ |
| 544 | + struct hci_h4p_info *info = dev_inst; |
| 545 | + int should_wakeup; |
| 546 | + struct hci_dev *hdev; |
| 547 | + |
| 548 | + if (!info->hdev) |
| 549 | + return IRQ_HANDLED; |
| 550 | + |
| 551 | + hdev = info->hdev; |
| 552 | + |
| 553 | + if (!test_bit(HCI_RUNNING, &hdev->flags)) |
| 554 | + return IRQ_HANDLED; |
| 555 | + |
| 556 | + should_wakeup = gpio_get_value(info->host_wakeup_gpio); |
| 557 | + NBT_DBG_POWER("gpio interrupt %d\n", should_wakeup); |
| 558 | + if (should_wakeup) { |
| 559 | + hci_h4p_enable_rx(info); |
| 560 | + } else { |
| 561 | + hci_h4p_disable_rx(info); |
| 562 | + } |
| 563 | + |
| 564 | + return IRQ_HANDLED; |
| 565 | +} |
| 566 | + |
| 567 | +static int hci_h4p_reset(struct hci_h4p_info *info) |
| 568 | +{ |
| 569 | + int err; |
| 570 | + |
| 571 | + hci_h4p_init_uart(info); |
| 572 | + hci_h4p_set_rts(info, 0); |
| 573 | + |
| 574 | + gpio_set_value(info->reset_gpio, 0); |
| 575 | + msleep(100); |
| 576 | + gpio_set_value(info->bt_wakeup_gpio, 1); |
| 577 | + gpio_set_value(info->reset_gpio, 1); |
| 578 | + msleep(100); |
| 579 | + |
| 580 | + err = hci_h4p_wait_for_cts(info, 1, 10); |
| 581 | + if (err < 0) { |
| 582 | + dev_err(info->dev, "No cts from bt chip\n"); |
| 583 | + return err; |
| 584 | + } |
| 585 | + |
| 586 | + hci_h4p_set_rts(info, 1); |
| 587 | + |
| 588 | + return 0; |
| 589 | +} |
| 590 | + |
| 591 | +/* hci callback functions */ |
| 592 | +static int hci_h4p_hci_flush(struct hci_dev *hdev) |
| 593 | +{ |
| 594 | + struct hci_h4p_info *info; |
| 595 | + info = hdev->driver_data; |
| 596 | + |
| 597 | + skb_queue_purge(&info->txq); |
| 598 | + |
| 599 | + return 0; |
| 600 | +} |
| 601 | + |
| 602 | +static int hci_h4p_hci_open(struct hci_dev *hdev) |
| 603 | +{ |
| 604 | + struct hci_h4p_info *info; |
| 605 | + int err; |
| 606 | + struct sk_buff *neg_cmd_skb; |
| 607 | + struct sk_buff_head fw_queue; |
| 608 | + |
| 609 | + info = hdev->driver_data; |
| 610 | + |
| 611 | + if (test_bit(HCI_RUNNING, &hdev->flags)) |
| 612 | + return 0; |
| 613 | + |
| 614 | + skb_queue_head_init(&fw_queue); |
| 615 | + err = hci_h4p_read_fw(info, &fw_queue); |
| 616 | + if (err < 0) { |
| 617 | + dev_err(info->dev, "Cannot read firmware\n"); |
| 618 | + return err; |
| 619 | + } |
| 620 | + neg_cmd_skb = skb_dequeue(&fw_queue); |
| 621 | + if (!neg_cmd_skb) { |
| 622 | + err = -EPROTO; |
| 623 | + goto err_clean; |
| 624 | + } |
| 625 | + info->alive_cmd_skb = skb_dequeue(&fw_queue); |
| 626 | + if (!info->alive_cmd_skb) { |
| 627 | + err = -EPROTO; |
| 628 | + goto err_clean; |
| 629 | + } |
| 630 | + |
| 631 | + hci_h4p_set_clk(info, &info->tx_clocks_en, 1); |
| 632 | + hci_h4p_set_clk(info, &info->rx_clocks_en, 1); |
| 633 | + |
| 634 | + tasklet_enable(&info->tx_task); |
| 635 | + tasklet_enable(&info->rx_task); |
| 636 | + info->rx_state = WAIT_FOR_PKT_TYPE; |
| 637 | + info->rx_count = 0; |
| 638 | + info->garbage_bytes = 0; |
| 639 | + info->rx_skb = NULL; |
| 640 | + info->pm_enabled = 0; |
| 641 | + init_completion(&info->fw_completion); |
| 642 | + |
| 643 | + err = hci_h4p_reset(info); |
| 644 | + if (err < 0) |
| 645 | + goto err_clean; |
| 646 | + |
| 647 | + err = hci_h4p_send_negotiation(info, neg_cmd_skb); |
| 648 | + neg_cmd_skb = NULL; |
| 649 | + if (err < 0) |
| 650 | + goto err_clean; |
| 651 | + |
| 652 | + err = hci_h4p_send_fw(info, &fw_queue); |
| 653 | + if (err < 0) { |
| 654 | + dev_err(info->dev, "Sending firmware failed.\n"); |
| 655 | + goto err_clean; |
| 656 | + } |
| 657 | + |
| 658 | + kfree_skb(info->alive_cmd_skb); |
| 659 | + info->alive_cmd_skb = NULL; |
| 660 | + info->pm_enabled = 1; |
| 661 | + info->tx_pm_enabled = 1; |
| 662 | + info->rx_pm_enabled = 0; |
| 663 | + set_bit(HCI_RUNNING, &hdev->flags); |
| 664 | + |
| 665 | + NBT_DBG("hci up and running\n"); |
| 666 | + return 0; |
| 667 | + |
| 668 | +err_clean: |
| 669 | + hci_h4p_hci_flush(hdev); |
| 670 | + tasklet_disable(&info->tx_task); |
| 671 | + tasklet_disable(&info->rx_task); |
| 672 | + hci_h4p_reset_uart(info); |
| 673 | + hci_h4p_set_clk(info, &info->tx_clocks_en, 0); |
| 674 | + hci_h4p_set_clk(info, &info->rx_clocks_en, 0); |
| 675 | + gpio_set_value(info->reset_gpio, 0); |
| 676 | + gpio_set_value(info->bt_wakeup_gpio, 0); |
| 677 | + skb_queue_purge(&fw_queue); |
| 678 | + kfree_skb(neg_cmd_skb); |
| 679 | + neg_cmd_skb = NULL; |
| 680 | + kfree_skb(info->alive_cmd_skb); |
| 681 | + info->alive_cmd_skb = NULL; |
| 682 | + kfree_skb(info->rx_skb); |
| 683 | + |
| 684 | + return err; |
| 685 | +} |
| 686 | + |
| 687 | +static int hci_h4p_hci_close(struct hci_dev *hdev) |
| 688 | +{ |
| 689 | + struct hci_h4p_info *info = hdev->driver_data; |
| 690 | + |
| 691 | + if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) |
| 692 | + return 0; |
| 693 | + |
| 694 | + hci_h4p_hci_flush(hdev); |
| 695 | + del_timer_sync(&info->tx_pm_timer); |
| 696 | + del_timer_sync(&info->rx_pm_timer); |
| 697 | + tasklet_disable(&info->tx_task); |
| 698 | + tasklet_disable(&info->rx_task); |
| 699 | + hci_h4p_set_clk(info, &info->tx_clocks_en, 1); |
| 700 | + hci_h4p_set_clk(info, &info->rx_clocks_en, 1); |
| 701 | + hci_h4p_reset_uart(info); |
| 702 | + hci_h4p_set_clk(info, &info->tx_clocks_en, 0); |
| 703 | + hci_h4p_set_clk(info, &info->rx_clocks_en, 0); |
| 704 | + gpio_set_value(info->reset_gpio, 0); |
| 705 | + gpio_set_value(info->bt_wakeup_gpio, 0); |
| 706 | + kfree_skb(info->rx_skb); |
| 707 | + |
| 708 | + return 0; |
| 709 | +} |
| 710 | + |
| 711 | +static void hci_h4p_hci_destruct(struct hci_dev *hdev) |
| 712 | +{ |
| 713 | +} |
| 714 | + |
| 715 | +static int hci_h4p_hci_send_frame(struct sk_buff *skb) |
| 716 | +{ |
| 717 | + struct hci_h4p_info *info; |
| 718 | + struct hci_dev *hdev = (struct hci_dev *)skb->dev; |
| 719 | + int err = 0; |
| 720 | + |
| 721 | + if (!hdev) { |
| 722 | + printk(KERN_WARNING "hci_h4p: Frame for unknown device\n"); |
| 723 | + return -ENODEV; |
| 724 | + } |
| 725 | + |
| 726 | + NBT_DBG("dev %p, skb %p\n", hdev, skb); |
| 727 | + |
| 728 | + info = hdev->driver_data; |
| 729 | + |
| 730 | + if (!test_bit(HCI_RUNNING, &hdev->flags)) { |
| 731 | + dev_warn(info->dev, "Frame for non-running device\n"); |
| 732 | + return -EIO; |
| 733 | + } |
| 734 | + |
| 735 | + switch (bt_cb(skb)->pkt_type) { |
| 736 | + case HCI_COMMAND_PKT: |
| 737 | + hdev->stat.cmd_tx++; |
| 738 | + break; |
| 739 | + case HCI_ACLDATA_PKT: |
| 740 | + hdev->stat.acl_tx++; |
| 741 | + break; |
| 742 | + case HCI_SCODATA_PKT: |
| 743 | + hdev->stat.sco_tx++; |
| 744 | + break; |
| 745 | + } |
| 746 | + |
| 747 | + /* Push frame type to skb */ |
| 748 | + *skb_push(skb, 1) = (bt_cb(skb)->pkt_type); |
| 749 | + /* We should allways send word aligned data to h4+ devices */ |
| 750 | + if (skb->len % 2) { |
| 751 | + err = skb_pad(skb, 1); |
| 752 | + } |
| 753 | + if (err) |
| 754 | + return err; |
| 755 | + |
| 756 | + hci_h4p_enable_tx(info); |
| 757 | + skb_queue_tail(&info->txq, skb); |
| 758 | + tasklet_schedule(&info->tx_task); |
| 759 | + |
| 760 | + return 0; |
| 761 | +} |
| 762 | + |
| 763 | +static int hci_h4p_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg) |
| 764 | +{ |
| 765 | + return -ENOIOCTLCMD; |
| 766 | +} |
| 767 | + |
| 768 | +static int hci_h4p_register_hdev(struct hci_h4p_info *info) |
| 769 | +{ |
| 770 | + struct hci_dev *hdev; |
| 771 | + |
| 772 | + /* Initialize and register HCI device */ |
| 773 | + |
| 774 | + hdev = hci_alloc_dev(); |
| 775 | + if (!hdev) { |
| 776 | + dev_err(info->dev, "Can't allocate memory for device\n"); |
| 777 | + return -ENOMEM; |
| 778 | + } |
| 779 | + info->hdev = hdev; |
| 780 | + |
| 781 | + hdev->dev_type = HCI_UART; |
| 782 | + hdev->driver_data = info; |
| 783 | + |
| 784 | + hdev->open = hci_h4p_hci_open; |
| 785 | + hdev->close = hci_h4p_hci_close; |
| 786 | + hdev->flush = hci_h4p_hci_flush; |
| 787 | + hdev->send = hci_h4p_hci_send_frame; |
| 788 | + hdev->destruct = hci_h4p_hci_destruct; |
| 789 | + hdev->ioctl = hci_h4p_hci_ioctl; |
| 790 | + |
| 791 | + hdev->owner = THIS_MODULE; |
| 792 | + |
| 793 | + if (hci_register_dev(hdev) < 0) { |
| 794 | + dev_err(info->dev, "hci_h4p: Can't register HCI device %s.\n", hdev->name); |
| 795 | + return -ENODEV; |
| 796 | + } |
| 797 | + |
| 798 | + return 0; |
| 799 | +} |
| 800 | + |
| 801 | +static int hci_h4p_probe(struct platform_device *pdev) |
| 802 | +{ |
| 803 | + struct omap_bluetooth_config *bt_config; |
| 804 | + struct hci_h4p_info *info; |
| 805 | + int irq, err; |
| 806 | + |
| 807 | + dev_info(&pdev->dev, "Registering HCI H4P device\n"); |
| 808 | + info = kzalloc(sizeof(struct hci_h4p_info), GFP_KERNEL); |
| 809 | + if (!info) |
| 810 | + return -ENOMEM; |
| 811 | + |
| 812 | + info->dev = &pdev->dev; |
| 813 | + info->pm_enabled = 0; |
| 814 | + info->tx_pm_enabled = 0; |
| 815 | + info->rx_pm_enabled = 0; |
| 816 | + info->garbage_bytes = 0; |
| 817 | + info->tx_clocks_en = 0; |
| 818 | + info->rx_clocks_en = 0; |
| 819 | + tasklet_init(&info->tx_task, hci_h4p_tx_tasklet, (unsigned long)info); |
| 820 | + tasklet_init(&info->rx_task, hci_h4p_rx_tasklet, (unsigned long)info); |
| 821 | + /* hci_h4p_hci_open assumes that tasklet is disabled in startup */ |
| 822 | + tasklet_disable(&info->tx_task); |
| 823 | + tasklet_disable(&info->rx_task); |
| 824 | + spin_lock_init(&info->lock); |
| 825 | + spin_lock_init(&info->clocks_lock); |
| 826 | + skb_queue_head_init(&info->txq); |
| 827 | + init_timer(&info->tx_pm_timer); |
| 828 | + info->tx_pm_timer.function = hci_h4p_tx_pm_timer; |
| 829 | + info->tx_pm_timer.data = (unsigned long)info; |
| 830 | + init_timer(&info->rx_pm_timer); |
| 831 | + info->rx_pm_timer.function = hci_h4p_rx_pm_timer; |
| 832 | + info->rx_pm_timer.data = (unsigned long)info; |
| 833 | + |
| 834 | + if (pdev->dev.platform_data == NULL) { |
| 835 | + dev_err(&pdev->dev, "Could not get Bluetooth config data\n"); |
| 836 | + return -ENODATA; |
| 837 | + } |
| 838 | + |
| 839 | + bt_config = pdev->dev.platform_data; |
| 840 | + info->chip_type = bt_config->chip_type; |
| 841 | + info->bt_wakeup_gpio = bt_config->bt_wakeup_gpio; |
| 842 | + info->host_wakeup_gpio = bt_config->host_wakeup_gpio; |
| 843 | + info->reset_gpio = bt_config->reset_gpio; |
| 844 | + info->bt_sysclk = bt_config->bt_sysclk; |
| 845 | + |
| 846 | + NBT_DBG("RESET gpio: %d\n", info->reset_gpio); |
| 847 | + NBT_DBG("BTWU gpio: %d\n", info->bt_wakeup_gpio); |
| 848 | + NBT_DBG("HOSTWU gpio: %d\n", info->host_wakeup_gpio); |
| 849 | + NBT_DBG("Uart: %d\n", bt_config->bt_uart); |
| 850 | + NBT_DBG("sysclk: %d\n", info->bt_sysclk); |
| 851 | + |
| 852 | + err = gpio_request(info->reset_gpio, "BT reset"); |
| 853 | + if (err < 0) { |
| 854 | + dev_err(&pdev->dev, "Cannot get GPIO line %d\n", |
| 855 | + info->reset_gpio); |
| 856 | + kfree(info); |
| 857 | + goto cleanup; |
| 858 | + } |
| 859 | + |
| 860 | + err = gpio_request(info->bt_wakeup_gpio, "BT wakeup"); |
| 861 | + if (err < 0) |
| 862 | + { |
| 863 | + dev_err(info->dev, "Cannot get GPIO line 0x%d", |
| 864 | + info->bt_wakeup_gpio); |
| 865 | + gpio_free(info->reset_gpio); |
| 866 | + kfree(info); |
| 867 | + goto cleanup; |
| 868 | + } |
| 869 | + |
| 870 | + err = gpio_request(info->host_wakeup_gpio, "BT host wakeup"); |
| 871 | + if (err < 0) |
| 872 | + { |
| 873 | + dev_err(info->dev, "Cannot get GPIO line %d", |
| 874 | + info->host_wakeup_gpio); |
| 875 | + gpio_free(info->reset_gpio); |
| 876 | + gpio_free(info->bt_wakeup_gpio); |
| 877 | + kfree(info); |
| 878 | + goto cleanup; |
| 879 | + } |
| 880 | + |
| 881 | + gpio_direction_output(info->reset_gpio, 0); |
| 882 | + gpio_direction_output(info->bt_wakeup_gpio, 0); |
| 883 | + gpio_direction_input(info->host_wakeup_gpio); |
| 884 | + |
| 885 | +//FIXME |
| 886 | +#if defined(CONFIG_ARCH_OMAP1) |
| 887 | +# define OMAP_UART1_BASE OMAP1_UART1_BASE |
| 888 | +# define OMAP_UART2_BASE OMAP1_UART2_BASE |
| 889 | +# define OMAP_UART3_BASE OMAP1_UART3_BASE |
| 890 | +#elif defined(CONFIG_ARCH_OMAP2) |
| 891 | +# define OMAP_UART1_BASE OMAP2_UART1_BASE |
| 892 | +# define OMAP_UART2_BASE OMAP2_UART2_BASE |
| 893 | +# define OMAP_UART3_BASE OMAP2_UART3_BASE |
| 894 | +#elif defined(CONFIG_ARCH_OMAP3) |
| 895 | +# define OMAP_UART1_BASE OMAP3_UART1_BASE |
| 896 | +# define OMAP_UART2_BASE OMAP3_UART2_BASE |
| 897 | +# define OMAP_UART3_BASE OMAP3_UART3_BASE |
| 898 | +#elif defined(CONFIG_ARCH_OMAP4) |
| 899 | +# define OMAP_UART1_BASE OMAP4_UART1_BASE |
| 900 | +# define OMAP_UART2_BASE OMAP4_UART2_BASE |
| 901 | +# define OMAP_UART3_BASE OMAP4_UART3_BASE |
| 902 | +#else |
| 903 | +# error |
| 904 | +#endif |
| 905 | + switch (bt_config->bt_uart) { |
| 906 | + case 1: |
| 907 | + if (cpu_is_omap16xx()) { |
| 908 | + irq = INT_UART1; |
| 909 | + info->uart_fclk = clk_get(NULL, "uart1_ck"); |
| 910 | + } else if (cpu_is_omap24xx()) { |
| 911 | + irq = INT_24XX_UART1_IRQ; |
| 912 | + info->uart_iclk = clk_get(NULL, "uart1_ick"); |
| 913 | + info->uart_fclk = clk_get(NULL, "uart1_fck"); |
| 914 | + } |
| 915 | + /* FIXME: Use platform_get_resource for the port */ |
| 916 | + info->uart_base = ioremap(OMAP_UART1_BASE, 0x16); |
| 917 | + if (!info->uart_base) |
| 918 | + goto cleanup; |
| 919 | + break; |
| 920 | + case 2: |
| 921 | + if (cpu_is_omap16xx()) { |
| 922 | + irq = INT_UART2; |
| 923 | + info->uart_fclk = clk_get(NULL, "uart2_ck"); |
| 924 | + } else { |
| 925 | + irq = INT_24XX_UART2_IRQ; |
| 926 | + info->uart_iclk = clk_get(NULL, "uart2_ick"); |
| 927 | + info->uart_fclk = clk_get(NULL, "uart2_fck"); |
| 928 | + } |
| 929 | + /* FIXME: Use platform_get_resource for the port */ |
| 930 | + info->uart_base = ioremap(OMAP_UART2_BASE, 0x16); |
| 931 | + if (!info->uart_base) |
| 932 | + goto cleanup; |
| 933 | + break; |
| 934 | + case 3: |
| 935 | + if (cpu_is_omap16xx()) { |
| 936 | + irq = INT_UART3; |
| 937 | + info->uart_fclk = clk_get(NULL, "uart3_ck"); |
| 938 | + } else { |
| 939 | + irq = INT_24XX_UART3_IRQ; |
| 940 | + info->uart_iclk = clk_get(NULL, "uart3_ick"); |
| 941 | + info->uart_fclk = clk_get(NULL, "uart3_fck"); |
| 942 | + } |
| 943 | + /* FIXME: Use platform_get_resource for the port */ |
| 944 | + info->uart_base = ioremap(OMAP_UART3_BASE, 0x16); |
| 945 | + if (!info->uart_base) |
| 946 | + goto cleanup; |
| 947 | + break; |
| 948 | + default: |
| 949 | + dev_err(info->dev, "No uart defined\n"); |
| 950 | + goto cleanup; |
| 951 | + } |
| 952 | + |
| 953 | + info->irq = irq; |
| 954 | + err = request_irq(irq, hci_h4p_interrupt, 0, "hci_h4p", (void *)info); |
| 955 | + if (err < 0) { |
| 956 | + dev_err(info->dev, "hci_h4p: unable to get IRQ %d\n", irq); |
| 957 | + goto cleanup; |
| 958 | + } |
| 959 | + |
| 960 | + err = request_irq(gpio_to_irq(info->host_wakeup_gpio), |
| 961 | + hci_h4p_wakeup_interrupt, |
| 962 | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, |
| 963 | + "hci_h4p_wkup", (void *)info); |
| 964 | + if (err < 0) { |
| 965 | + dev_err(info->dev, "hci_h4p: unable to get wakeup IRQ %d\n", |
| 966 | + gpio_to_irq(info->host_wakeup_gpio)); |
| 967 | + free_irq(irq, (void *)info); |
| 968 | + goto cleanup; |
| 969 | + } |
| 970 | + |
| 971 | + hci_h4p_set_clk(info, &info->tx_clocks_en, 1); |
| 972 | + hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_CTS | UART_EFR_RTS); |
| 973 | + err = hci_h4p_init_uart(info); |
| 974 | + if (err < 0) |
| 975 | + goto cleanup_irq; |
| 976 | + err = hci_h4p_reset(info); |
| 977 | + if (err < 0) |
| 978 | + goto cleanup_irq; |
| 979 | + err = hci_h4p_wait_for_cts(info, 1, 10); |
| 980 | + if (err < 0) |
| 981 | + goto cleanup_irq; |
| 982 | + hci_h4p_set_clk(info, &info->tx_clocks_en, 0); |
| 983 | + |
| 984 | + platform_set_drvdata(pdev, info); |
| 985 | + err = hci_h4p_sysfs_create_files(info->dev); |
| 986 | + if (err < 0) |
| 987 | + goto cleanup_irq; |
| 988 | + |
| 989 | + if (hci_h4p_register_hdev(info) < 0) { |
| 990 | + dev_err(info->dev, "failed to register hci_h4p hci device\n"); |
| 991 | + goto cleanup_irq; |
| 992 | + } |
| 993 | + gpio_set_value(info->reset_gpio, 0); |
| 994 | + |
| 995 | + return 0; |
| 996 | + |
| 997 | +cleanup_irq: |
| 998 | + free_irq(irq, (void *)info); |
| 999 | + free_irq(gpio_to_irq(info->host_wakeup_gpio), (void *)info); |
| 1000 | +cleanup: |
| 1001 | + gpio_set_value(info->reset_gpio, 0); |
| 1002 | + gpio_free(info->reset_gpio); |
| 1003 | + gpio_free(info->bt_wakeup_gpio); |
| 1004 | + gpio_free(info->host_wakeup_gpio); |
| 1005 | + kfree(info); |
| 1006 | + |
| 1007 | + return err; |
| 1008 | + |
| 1009 | +} |
| 1010 | + |
| 1011 | +static int hci_h4p_remove(struct platform_device *dev) |
| 1012 | +{ |
| 1013 | + struct hci_h4p_info *info; |
| 1014 | + |
| 1015 | + info = platform_get_drvdata(dev); |
| 1016 | + |
| 1017 | + hci_h4p_hci_close(info->hdev); |
| 1018 | + free_irq(gpio_to_irq(info->host_wakeup_gpio), (void *) info); |
| 1019 | + hci_free_dev(info->hdev); |
| 1020 | + gpio_free(info->reset_gpio); |
| 1021 | + gpio_free(info->bt_wakeup_gpio); |
| 1022 | + gpio_free(info->host_wakeup_gpio); |
| 1023 | + free_irq(info->irq, (void *) info); |
| 1024 | + kfree(info); |
| 1025 | + |
| 1026 | + return 0; |
| 1027 | +} |
| 1028 | + |
| 1029 | +static struct platform_driver hci_h4p_driver = { |
| 1030 | + .probe = hci_h4p_probe, |
| 1031 | + .remove = hci_h4p_remove, |
| 1032 | + .driver = { |
| 1033 | + .name = "hci_h4p", |
| 1034 | + }, |
| 1035 | +}; |
| 1036 | + |
| 1037 | +static int __init hci_h4p_init(void) |
| 1038 | +{ |
| 1039 | + int err = 0; |
| 1040 | + |
| 1041 | + /* Register the driver with LDM */ |
| 1042 | + err = platform_driver_register(&hci_h4p_driver); |
| 1043 | + if (err < 0) |
| 1044 | + printk(KERN_WARNING "failed to register hci_h4p driver\n"); |
| 1045 | + |
| 1046 | + return err; |
| 1047 | +} |
| 1048 | + |
| 1049 | +static void __exit hci_h4p_exit(void) |
| 1050 | +{ |
| 1051 | + platform_driver_unregister(&hci_h4p_driver); |
| 1052 | +} |
| 1053 | + |
| 1054 | +module_init(hci_h4p_init); |
| 1055 | +module_exit(hci_h4p_exit); |
| 1056 | + |
| 1057 | +MODULE_DESCRIPTION("h4 driver with nokia extensions"); |
| 1058 | +MODULE_LICENSE("GPL"); |
| 1059 | +MODULE_AUTHOR("Ville Tervo"); |
| 1060 | --- /dev/null |
| 1061 | +++ b/drivers/bluetooth/hci_h4p/fw.c |
| 1062 | @@ -0,0 +1,155 @@ |
| 1063 | +/* |
| 1064 | + * This file is part of hci_h4p bluetooth driver |
| 1065 | + * |
| 1066 | + * Copyright (C) 2005, 2006 Nokia Corporation. |
| 1067 | + * |
| 1068 | + * Contact: Ville Tervo <ville.tervo@nokia.com> |
| 1069 | + * |
| 1070 | + * This program is free software; you can redistribute it and/or |
| 1071 | + * modify it under the terms of the GNU General Public License |
| 1072 | + * version 2 as published by the Free Software Foundation. |
| 1073 | + * |
| 1074 | + * This program is distributed in the hope that it will be useful, but |
| 1075 | + * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 1076 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 1077 | + * General Public License for more details. |
| 1078 | + * |
| 1079 | + * You should have received a copy of the GNU General Public License |
| 1080 | + * along with this program; if not, write to the Free Software |
| 1081 | + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 1082 | + * 02110-1301 USA |
| 1083 | + * |
| 1084 | + */ |
| 1085 | + |
| 1086 | +#include <linux/skbuff.h> |
| 1087 | +#include <linux/firmware.h> |
| 1088 | +#include <linux/clk.h> |
| 1089 | + |
| 1090 | +#include <net/bluetooth/bluetooth.h> |
| 1091 | + |
| 1092 | +#include "hci_h4p.h" |
| 1093 | + |
| 1094 | +#define BT_CHIP_TI 2 |
| 1095 | +#define BT_CHIP_CSR 1 |
| 1096 | + |
| 1097 | +static int fw_pos; |
| 1098 | + |
| 1099 | +/* Firmware handling */ |
| 1100 | +static int hci_h4p_open_firmware(struct hci_h4p_info *info, |
| 1101 | + const struct firmware **fw_entry) |
| 1102 | +{ |
| 1103 | + int err; |
| 1104 | + |
| 1105 | + fw_pos = 0; |
| 1106 | + NBT_DBG_FW("Opening %d firmware\n", info->chip_type); |
| 1107 | + switch (info->chip_type) { |
| 1108 | + case BT_CHIP_TI: |
| 1109 | + err = request_firmware(fw_entry, "brf6150fw.bin", info->dev); |
| 1110 | + break; |
| 1111 | + case BT_CHIP_CSR: |
| 1112 | + err = request_firmware(fw_entry, "bc4fw.bin", info->dev); |
| 1113 | + break; |
| 1114 | + default: |
| 1115 | + dev_err(info->dev, "Invalid chip type\n"); |
| 1116 | + *fw_entry = NULL; |
| 1117 | + err = -EINVAL; |
| 1118 | + } |
| 1119 | + |
| 1120 | + return err; |
| 1121 | +} |
| 1122 | + |
| 1123 | +static void hci_h4p_close_firmware(const struct firmware *fw_entry) |
| 1124 | +{ |
| 1125 | + release_firmware(fw_entry); |
| 1126 | +} |
| 1127 | + |
| 1128 | +/* Read fw. Return length of the command. If no more commands in |
| 1129 | + * fw 0 is returned. In error case return value is negative. |
| 1130 | + */ |
| 1131 | +static int hci_h4p_read_fw_cmd(struct hci_h4p_info *info, struct sk_buff **skb, |
| 1132 | + const struct firmware *fw_entry, int how) |
| 1133 | +{ |
| 1134 | + unsigned int cmd_len; |
| 1135 | + |
| 1136 | + if (fw_pos >= fw_entry->size) { |
| 1137 | + return 0; |
| 1138 | + } |
| 1139 | + |
| 1140 | + cmd_len = fw_entry->data[fw_pos++]; |
| 1141 | + if (!cmd_len) |
| 1142 | + return 0; |
| 1143 | + |
| 1144 | + if (fw_pos + cmd_len > fw_entry->size) { |
| 1145 | + dev_err(info->dev, "Corrupted firmware image\n"); |
| 1146 | + return -EMSGSIZE; |
| 1147 | + } |
| 1148 | + |
| 1149 | + *skb = bt_skb_alloc(cmd_len, how); |
| 1150 | + if (!*skb) { |
| 1151 | + dev_err(info->dev, "Cannot reserve memory for buffer\n"); |
| 1152 | + return -ENOMEM; |
| 1153 | + } |
| 1154 | + memcpy(skb_put(*skb, cmd_len), &fw_entry->data[fw_pos], cmd_len); |
| 1155 | + |
| 1156 | + fw_pos += cmd_len; |
| 1157 | + |
| 1158 | + return (*skb)->len; |
| 1159 | +} |
| 1160 | + |
| 1161 | +int hci_h4p_read_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue) |
| 1162 | +{ |
| 1163 | + const struct firmware *fw_entry = NULL; |
| 1164 | + struct sk_buff *skb = NULL; |
| 1165 | + int err; |
| 1166 | + |
| 1167 | + err = hci_h4p_open_firmware(info, &fw_entry); |
| 1168 | + if (err < 0 || !fw_entry) |
| 1169 | + goto err_clean; |
| 1170 | + |
| 1171 | + while ((err = hci_h4p_read_fw_cmd(info, &skb, fw_entry, GFP_KERNEL))) { |
| 1172 | + if (err < 0 || !skb) |
| 1173 | + goto err_clean; |
| 1174 | + |
| 1175 | + skb_queue_tail(fw_queue, skb); |
| 1176 | + } |
| 1177 | + |
| 1178 | +err_clean: |
| 1179 | + hci_h4p_close_firmware(fw_entry); |
| 1180 | + return err; |
| 1181 | +} |
| 1182 | + |
| 1183 | +int hci_h4p_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue) |
| 1184 | +{ |
| 1185 | + int err; |
| 1186 | + |
| 1187 | + switch(info->chip_type) { |
| 1188 | + case BT_CHIP_CSR: |
| 1189 | + err = hci_h4p_bc4_send_fw(info, fw_queue); |
| 1190 | + break; |
| 1191 | + case BT_CHIP_TI: |
| 1192 | + err = hci_h4p_brf6150_send_fw(info, fw_queue); |
| 1193 | + break; |
| 1194 | + default: |
| 1195 | + dev_err(info->dev, "Don't know how to send firmware\n"); |
| 1196 | + err = -EINVAL; |
| 1197 | + } |
| 1198 | + |
| 1199 | + return err; |
| 1200 | +} |
| 1201 | + |
| 1202 | +void hci_h4p_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb) |
| 1203 | +{ |
| 1204 | + switch (info->chip_type) { |
| 1205 | + case BT_CHIP_CSR: |
| 1206 | + hci_h4p_bc4_parse_fw_event(info, skb); |
| 1207 | + break; |
| 1208 | + case BT_CHIP_TI: |
| 1209 | + hci_h4p_brf6150_parse_fw_event(info, skb); |
| 1210 | + break; |
| 1211 | + default: |
| 1212 | + dev_err(info->dev, "Don't know how to parse fw event\n"); |
| 1213 | + info->fw_error = -EINVAL; |
| 1214 | + } |
| 1215 | + |
| 1216 | + return; |
| 1217 | +} |
| 1218 | --- /dev/null |
| 1219 | +++ b/drivers/bluetooth/hci_h4p/fw-csr.c |
| 1220 | @@ -0,0 +1,149 @@ |
| 1221 | +/* |
| 1222 | + * This file is part of hci_h4p bluetooth driver |
| 1223 | + * |
| 1224 | + * Copyright (C) 2005, 2006 Nokia Corporation. |
| 1225 | + * |
| 1226 | + * Contact: Ville Tervo <ville.tervo@nokia.com> |
| 1227 | + * |
| 1228 | + * This program is free software; you can redistribute it and/or |
| 1229 | + * modify it under the terms of the GNU General Public License |
| 1230 | + * version 2 as published by the Free Software Foundation. |
| 1231 | + * |
| 1232 | + * This program is distributed in the hope that it will be useful, but |
| 1233 | + * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 1234 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 1235 | + * General Public License for more details. |
| 1236 | + * |
| 1237 | + * You should have received a copy of the GNU General Public License |
| 1238 | + * along with this program; if not, write to the Free Software |
| 1239 | + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 1240 | + * 02110-1301 USA |
| 1241 | + * |
| 1242 | + */ |
| 1243 | + |
| 1244 | +#include <linux/skbuff.h> |
| 1245 | +#include <linux/delay.h> |
| 1246 | +#include <linux/serial_reg.h> |
| 1247 | + |
| 1248 | +#include "hci_h4p.h" |
| 1249 | + |
| 1250 | +void hci_h4p_bc4_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb) |
| 1251 | +{ |
| 1252 | + /* Check if this is fw packet */ |
| 1253 | + if (skb->data[0] != 0xff) { |
| 1254 | + hci_recv_frame(skb); |
| 1255 | + return; |
| 1256 | + } |
| 1257 | + |
| 1258 | + if (skb->data[11] || skb->data[12]) { |
| 1259 | + dev_err(info->dev, "Firmware sending command failed\n"); |
| 1260 | + info->fw_error = -EPROTO; |
| 1261 | + } |
| 1262 | + |
| 1263 | + kfree_skb(skb); |
| 1264 | + complete(&info->fw_completion); |
| 1265 | +} |
| 1266 | + |
| 1267 | +int hci_h4p_bc4_send_fw(struct hci_h4p_info *info, |
| 1268 | + struct sk_buff_head *fw_queue) |
| 1269 | +{ |
| 1270 | + struct sk_buff *skb; |
| 1271 | + unsigned int offset; |
| 1272 | + int retries, count, i; |
| 1273 | + |
| 1274 | + info->fw_error = 0; |
| 1275 | + |
| 1276 | + NBT_DBG_FW("Sending firmware\n"); |
| 1277 | + skb = skb_dequeue(fw_queue); |
| 1278 | + |
| 1279 | + if (!skb) |
| 1280 | + return -ENOMSG; |
| 1281 | + |
| 1282 | + info->bdaddr[0] = 0x00; |
| 1283 | + info->bdaddr[1] = 0x1D; |
| 1284 | + info->bdaddr[2] = 0x6E; |
| 1285 | + info->bdaddr[3] = 0xD4; |
| 1286 | + info->bdaddr[4] = 0xF0; |
| 1287 | + info->bdaddr[5] = 0x37; |
| 1288 | + |
| 1289 | + /* Check if this is bd_address packet */ |
| 1290 | + if (skb->data[15] == 0x01 && skb->data[16] == 0x00) { |
| 1291 | + dev_info(info->dev, "bd_address packet found\n"); |
| 1292 | + offset = 21; |
| 1293 | + skb->data[offset + 1] = 0x00; |
| 1294 | + skb->data[offset + 5] = 0x00; |
| 1295 | + skb->data[offset + 7] = info->bdaddr[0]; |
| 1296 | + skb->data[offset + 6] = info->bdaddr[1]; |
| 1297 | + skb->data[offset + 4] = info->bdaddr[2]; |
| 1298 | + skb->data[offset + 0] = info->bdaddr[3]; |
| 1299 | + skb->data[offset + 3] = info->bdaddr[4]; |
| 1300 | + skb->data[offset + 2] = info->bdaddr[5]; |
| 1301 | + } |
| 1302 | + |
| 1303 | + for (i = 0; i < 6; i++) { |
| 1304 | + if (info->bdaddr[i] != 0x00) |
| 1305 | + break; |
| 1306 | + } |
| 1307 | + |
| 1308 | + /* if (i > 5) { |
| 1309 | + dev_info(info->dev, "Valid bluetooth address not found.\n"); |
| 1310 | + kfree_skb(skb); |
| 1311 | + return -ENODEV; |
| 1312 | + } */ |
| 1313 | + |
| 1314 | + for (count = 1; ; count++) { |
| 1315 | + NBT_DBG_FW("Sending firmware command %d\n", count); |
| 1316 | + init_completion(&info->fw_completion); |
| 1317 | + skb_queue_tail(&info->txq, skb); |
| 1318 | + tasklet_schedule(&info->tx_task); |
| 1319 | + |
| 1320 | + skb = skb_dequeue(fw_queue); |
| 1321 | + if (!skb) |
| 1322 | + break; |
| 1323 | + |
| 1324 | + if (!wait_for_completion_timeout(&info->fw_completion, |
| 1325 | + msecs_to_jiffies(1000))) { |
| 1326 | + dev_err(info->dev, "No reply to fw command\n"); |
| 1327 | + return -ETIMEDOUT; |
| 1328 | + } |
| 1329 | + |
| 1330 | + if (info->fw_error) { |
| 1331 | + dev_err(info->dev, "FW error\n"); |
| 1332 | + return -EPROTO; |
| 1333 | + } |
| 1334 | + }; |
| 1335 | + |
| 1336 | + /* Wait for chip warm reset */ |
| 1337 | + retries = 100; |
| 1338 | + while ((!skb_queue_empty(&info->txq) || |
| 1339 | + !(hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT)) && |
| 1340 | + retries--) { |
| 1341 | + msleep(10); |
| 1342 | + } |
| 1343 | + if (!retries) { |
| 1344 | + dev_err(info->dev, "Transmitter not empty\n"); |
| 1345 | + return -ETIMEDOUT; |
| 1346 | + } |
| 1347 | + |
| 1348 | + hci_h4p_change_speed(info, BC4_MAX_BAUD_RATE); |
| 1349 | + |
| 1350 | + if (hci_h4p_wait_for_cts(info, 1, 100)) { |
| 1351 | + dev_err(info->dev, "cts didn't go down after final speed change\n"); |
| 1352 | + return -ETIMEDOUT; |
| 1353 | + } |
| 1354 | + |
| 1355 | + retries = 100; |
| 1356 | + do { |
| 1357 | + init_completion(&info->init_completion); |
| 1358 | + hci_h4p_send_alive_packet(info); |
| 1359 | + retries--; |
| 1360 | + } while (!wait_for_completion_timeout(&info->init_completion, 100) && |
| 1361 | + retries > 0); |
| 1362 | + |
| 1363 | + if (!retries) { |
| 1364 | + dev_err(info->dev, "No alive reply after speed change\n"); |
| 1365 | + return -ETIMEDOUT; |
| 1366 | + } |
| 1367 | + |
| 1368 | + return 0; |
| 1369 | +} |
| 1370 | --- /dev/null |
| 1371 | +++ b/drivers/bluetooth/hci_h4p/fw-ti.c |
| 1372 | @@ -0,0 +1,90 @@ |
| 1373 | +/* |
| 1374 | + * This file is part of hci_h4p bluetooth driver |
| 1375 | + * |
| 1376 | + * Copyright (C) 2005, 2006 Nokia Corporation. |
| 1377 | + * |
| 1378 | + * Contact: Ville Tervo <ville.tervo@nokia.com> |
| 1379 | + * |
| 1380 | + * This program is free software; you can redistribute it and/or |
| 1381 | + * modify it under the terms of the GNU General Public License |
| 1382 | + * version 2 as published by the Free Software Foundation. |
| 1383 | + * |
| 1384 | + * This program is distributed in the hope that it will be useful, but |
| 1385 | + * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 1386 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 1387 | + * General Public License for more details. |
| 1388 | + * |
| 1389 | + * You should have received a copy of the GNU General Public License |
| 1390 | + * along with this program; if not, write to the Free Software |
| 1391 | + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 1392 | + * 02110-1301 USA |
| 1393 | + * |
| 1394 | + */ |
| 1395 | + |
| 1396 | +#include <linux/skbuff.h> |
| 1397 | + |
| 1398 | +#include "hci_h4p.h" |
| 1399 | + |
| 1400 | +void hci_h4p_brf6150_parse_fw_event(struct hci_h4p_info *info, |
| 1401 | + struct sk_buff *skb) |
| 1402 | +{ |
| 1403 | + struct hci_fw_event *ev; |
| 1404 | + int err = 0; |
| 1405 | + |
| 1406 | + if (bt_cb(skb)->pkt_type != H4_EVT_PKT) { |
| 1407 | + dev_err(info->dev, "Got non event fw packet.\n"); |
| 1408 | + err = -EPROTO; |
| 1409 | + goto ret; |
| 1410 | + } |
| 1411 | + |
| 1412 | + ev = (struct hci_fw_event *)skb->data; |
| 1413 | + if (ev->hev.evt != HCI_EV_CMD_COMPLETE) { |
| 1414 | + dev_err(info->dev, "Got non cmd complete fw event\n"); |
| 1415 | + err = -EPROTO; |
| 1416 | + goto ret; |
| 1417 | + } |
| 1418 | + |
| 1419 | + if (ev->status != 0) { |
| 1420 | + dev_err(info->dev, "Got error status from fw command\n"); |
| 1421 | + err = -EPROTO; |
| 1422 | + goto ret; |
| 1423 | + } |
| 1424 | + |
| 1425 | +ret: |
| 1426 | + info->fw_error = err; |
| 1427 | + complete(&info->fw_completion); |
| 1428 | +} |
| 1429 | + |
| 1430 | +int hci_h4p_brf6150_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue) |
| 1431 | +{ |
| 1432 | + struct sk_buff *skb; |
| 1433 | + int err = 0; |
| 1434 | + |
| 1435 | + info->fw_error = 0; |
| 1436 | + |
| 1437 | + while ((skb = skb_dequeue(fw_queue)) != NULL) { |
| 1438 | + /* We should allways send word aligned data to h4+ devices */ |
| 1439 | + if (skb->len % 2) { |
| 1440 | + err = skb_pad(skb, 1); |
| 1441 | + } |
| 1442 | + if (err) |
| 1443 | + return err; |
| 1444 | + |
| 1445 | + init_completion(&info->fw_completion); |
| 1446 | + skb_queue_tail(&info->txq, skb); |
| 1447 | + tasklet_schedule(&info->tx_task); |
| 1448 | + |
| 1449 | + if (!wait_for_completion_timeout(&info->fw_completion, HZ)) { |
| 1450 | + dev_err(info->dev, "Timeout while sending brf6150 fw\n"); |
| 1451 | + return -ETIMEDOUT; |
| 1452 | + } |
| 1453 | + |
| 1454 | + if (info->fw_error) { |
| 1455 | + dev_err(info->dev, "There was fw_error while sending bfr6150 fw\n"); |
| 1456 | + return -EPROTO; |
| 1457 | + } |
| 1458 | + } |
| 1459 | + NBT_DBG_FW("Firmware sent\n"); |
| 1460 | + |
| 1461 | + return 0; |
| 1462 | +} |
| 1463 | --- /dev/null |
| 1464 | +++ b/drivers/bluetooth/hci_h4p/hci_h4p.h |
| 1465 | @@ -0,0 +1,183 @@ |
| 1466 | +/* |
| 1467 | + * This file is part of hci_h4p bluetooth driver |
| 1468 | + * |
| 1469 | + * Copyright (C) 2005, 2006 Nokia Corporation. |
| 1470 | + * |
| 1471 | + * Contact: Ville Tervo <ville.tervo@nokia.com> |
| 1472 | + * |
| 1473 | + * This program is free software; you can redistribute it and/or |
| 1474 | + * modify it under the terms of the GNU General Public License |
| 1475 | + * version 2 as published by the Free Software Foundation. |
| 1476 | + * |
| 1477 | + * This program is distributed in the hope that it will be useful, but |
| 1478 | + * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 1479 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 1480 | + * General Public License for more details. |
| 1481 | + * |
| 1482 | + * You should have received a copy of the GNU General Public License |
| 1483 | + * along with this program; if not, write to the Free Software |
| 1484 | + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 1485 | + * 02110-1301 USA |
| 1486 | + * |
| 1487 | + */ |
| 1488 | + |
| 1489 | +#include <mach/board.h> |
| 1490 | + |
| 1491 | +#include <net/bluetooth/bluetooth.h> |
| 1492 | +#include <net/bluetooth/hci_core.h> |
| 1493 | +#include <net/bluetooth/hci.h> |
| 1494 | + |
| 1495 | +#ifndef __DRIVERS_BLUETOOTH_HCI_H4P_H |
| 1496 | +#define __DRIVERS_BLUETOOTH_HCI_H4P_H |
| 1497 | + |
| 1498 | +#define UART_SYSC_OMAP_RESET 0x03 |
| 1499 | +#define UART_SYSS_RESETDONE 0x01 |
| 1500 | +#define UART_OMAP_SCR_EMPTY_THR 0x08 |
| 1501 | +#define UART_OMAP_SCR_WAKEUP 0x10 |
| 1502 | +#define UART_OMAP_SSR_WAKEUP 0x02 |
| 1503 | +#define UART_OMAP_SSR_TXFULL 0x01 |
| 1504 | + |
| 1505 | +#if 0 |
| 1506 | +#define NBT_DBG(fmt, arg...) printk("%s: " fmt "" , __FUNCTION__ , ## arg) |
| 1507 | +#else |
| 1508 | +#define NBT_DBG(...) |
| 1509 | +#endif |
| 1510 | + |
| 1511 | +#if 0 |
| 1512 | +#define NBT_DBG_FW(fmt, arg...) printk("%s: " fmt "" , __FUNCTION__ , ## arg) |
| 1513 | +#else |
| 1514 | +#define NBT_DBG_FW(...) |
| 1515 | +#endif |
| 1516 | + |
| 1517 | +#if 0 |
| 1518 | +#define NBT_DBG_POWER(fmt, arg...) printk("%s: " fmt "" , __FUNCTION__ , ## arg) |
| 1519 | +#else |
| 1520 | +#define NBT_DBG_POWER(...) |
| 1521 | +#endif |
| 1522 | + |
| 1523 | +#if 0 |
| 1524 | +#define NBT_DBG_TRANSFER(fmt, arg...) printk("%s: " fmt "" , __FUNCTION__ , ## arg) |
| 1525 | +#else |
| 1526 | +#define NBT_DBG_TRANSFER(...) |
| 1527 | +#endif |
| 1528 | + |
| 1529 | +#if 0 |
| 1530 | +#define NBT_DBG_TRANSFER_NF(fmt, arg...) printk(fmt "" , ## arg) |
| 1531 | +#else |
| 1532 | +#define NBT_DBG_TRANSFER_NF(...) |
| 1533 | +#endif |
| 1534 | + |
| 1535 | +#if 0 |
| 1536 | +#define NBT_DBG_DMA(fmt, arg...) printk("%s: " fmt "" , __FUNCTION__ , ## arg) |
| 1537 | +#else |
| 1538 | +#define NBT_DBG_DMA(...) |
| 1539 | +#endif |
| 1540 | + |
| 1541 | +struct hci_h4p_info { |
| 1542 | + struct hci_dev *hdev; |
| 1543 | + spinlock_t lock; |
| 1544 | + |
| 1545 | + void __iomem *uart_base; |
| 1546 | + unsigned long uart_phys_base; |
| 1547 | + int irq; |
| 1548 | + struct device *dev; |
| 1549 | + u8 bdaddr[6]; |
| 1550 | + u8 chip_type; |
| 1551 | + u8 bt_wakeup_gpio; |
| 1552 | + u8 host_wakeup_gpio; |
| 1553 | + u8 reset_gpio; |
| 1554 | + u8 bt_sysclk; |
| 1555 | + |
| 1556 | + |
| 1557 | + struct sk_buff_head fw_queue; |
| 1558 | + struct sk_buff *alive_cmd_skb; |
| 1559 | + struct completion init_completion; |
| 1560 | + struct completion fw_completion; |
| 1561 | + int fw_error; |
| 1562 | + int init_error; |
| 1563 | + |
| 1564 | + struct sk_buff_head txq; |
| 1565 | + struct tasklet_struct tx_task; |
| 1566 | + |
| 1567 | + struct sk_buff *rx_skb; |
| 1568 | + long rx_count; |
| 1569 | + unsigned long rx_state; |
| 1570 | + unsigned long garbage_bytes; |
| 1571 | + struct tasklet_struct rx_task; |
| 1572 | + |
| 1573 | + int pm_enabled; |
| 1574 | + int tx_pm_enabled; |
| 1575 | + int rx_pm_enabled; |
| 1576 | + struct timer_list tx_pm_timer; |
| 1577 | + struct timer_list rx_pm_timer; |
| 1578 | + |
| 1579 | + int tx_clocks_en; |
| 1580 | + int rx_clocks_en; |
| 1581 | + spinlock_t clocks_lock; |
| 1582 | + struct clk *uart_iclk; |
| 1583 | + struct clk *uart_fclk; |
| 1584 | +}; |
| 1585 | + |
| 1586 | +#define MAX_BAUD_RATE 921600 |
| 1587 | +#define BC4_MAX_BAUD_RATE 3692300 |
| 1588 | +#define UART_CLOCK 48000000 |
| 1589 | +#define BT_INIT_DIVIDER 320 |
| 1590 | +#define BT_BAUDRATE_DIVIDER 384000000 |
| 1591 | +#define BT_SYSCLK_DIV 1000 |
| 1592 | +#define INIT_SPEED 120000 |
| 1593 | + |
| 1594 | +#define H4_TYPE_SIZE 1 |
| 1595 | + |
| 1596 | +/* H4+ packet types */ |
| 1597 | +#define H4_CMD_PKT 0x01 |
| 1598 | +#define H4_ACL_PKT 0x02 |
| 1599 | +#define H4_SCO_PKT 0x03 |
| 1600 | +#define H4_EVT_PKT 0x04 |
| 1601 | +#define H4_NEG_PKT 0x06 |
| 1602 | +#define H4_ALIVE_PKT 0x07 |
| 1603 | + |
| 1604 | +/* TX states */ |
| 1605 | +#define WAIT_FOR_PKT_TYPE 1 |
| 1606 | +#define WAIT_FOR_HEADER 2 |
| 1607 | +#define WAIT_FOR_DATA 3 |
| 1608 | + |
| 1609 | +struct hci_fw_event { |
| 1610 | + struct hci_event_hdr hev; |
| 1611 | + struct hci_ev_cmd_complete cmd; |
| 1612 | + u8 status; |
| 1613 | +} __attribute__ ((packed)); |
| 1614 | + |
| 1615 | +struct hci_bc4_set_bdaddr { |
| 1616 | + u8 type; |
| 1617 | + struct hci_command_hdr cmd_hdr; |
| 1618 | +} __attribute__ ((packed)); |
| 1619 | + |
| 1620 | +int hci_h4p_send_alive_packet(struct hci_h4p_info *info); |
| 1621 | + |
| 1622 | +void hci_h4p_bc4_parse_fw_event(struct hci_h4p_info *info, |
| 1623 | + struct sk_buff *skb); |
| 1624 | +int hci_h4p_bc4_send_fw(struct hci_h4p_info *info, |
| 1625 | + struct sk_buff_head *fw_queue); |
| 1626 | + |
| 1627 | +void hci_h4p_brf6150_parse_fw_event(struct hci_h4p_info *info, |
| 1628 | + struct sk_buff *skb); |
| 1629 | +int hci_h4p_brf6150_send_fw(struct hci_h4p_info *info, |
| 1630 | + struct sk_buff_head *fw_queue); |
| 1631 | + |
| 1632 | +int hci_h4p_read_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue); |
| 1633 | +int hci_h4p_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue); |
| 1634 | +void hci_h4p_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb); |
| 1635 | + |
| 1636 | +int hci_h4p_sysfs_create_files(struct device *dev); |
| 1637 | + |
| 1638 | +void hci_h4p_outb(struct hci_h4p_info *info, unsigned int offset, u8 val); |
| 1639 | +u8 hci_h4p_inb(struct hci_h4p_info *info, unsigned int offset); |
| 1640 | +void hci_h4p_set_rts(struct hci_h4p_info *info, int active); |
| 1641 | +int hci_h4p_wait_for_cts(struct hci_h4p_info *info, int active, int timeout_ms); |
| 1642 | +void __hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which); |
| 1643 | +void hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which); |
| 1644 | +void hci_h4p_change_speed(struct hci_h4p_info *info, unsigned long speed); |
| 1645 | +int hci_h4p_reset_uart(struct hci_h4p_info *info); |
| 1646 | +int hci_h4p_init_uart(struct hci_h4p_info *info); |
| 1647 | + |
| 1648 | +#endif /* __DRIVERS_BLUETOOTH_HCI_H4P_H */ |
| 1649 | --- /dev/null |
| 1650 | +++ b/drivers/bluetooth/hci_h4p/Makefile |
| 1651 | @@ -0,0 +1,7 @@ |
| 1652 | +# |
| 1653 | +# Makefile for the Linux Bluetooth HCI device drivers. |
| 1654 | +# |
| 1655 | + |
| 1656 | +obj-$(CONFIG_BT_HCIH4P) += hci_h4p.o |
| 1657 | + |
| 1658 | +hci_h4p-objs := core.o fw.o uart.o sysfs.o fw-ti.o fw-csr.o |
| 1659 | --- /dev/null |
| 1660 | +++ b/drivers/bluetooth/hci_h4p/sysfs.c |
| 1661 | @@ -0,0 +1,84 @@ |
| 1662 | +/* |
| 1663 | + * This file is part of hci_h4p bluetooth driver |
| 1664 | + * |
| 1665 | + * Copyright (C) 2005, 2006 Nokia Corporation. |
| 1666 | + * |
| 1667 | + * Contact: Ville Tervo <ville.tervo@nokia.com> |
| 1668 | + * |
| 1669 | + * This program is free software; you can redistribute it and/or |
| 1670 | + * modify it under the terms of the GNU General Public License |
| 1671 | + * version 2 as published by the Free Software Foundation. |
| 1672 | + * |
| 1673 | + * This program is distributed in the hope that it will be useful, but |
| 1674 | + * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 1675 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 1676 | + * General Public License for more details. |
| 1677 | + * |
| 1678 | + * You should have received a copy of the GNU General Public License |
| 1679 | + * along with this program; if not, write to the Free Software |
| 1680 | + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 1681 | + * 02110-1301 USA |
| 1682 | + * |
| 1683 | + */ |
| 1684 | + |
| 1685 | +#include <linux/kernel.h> |
| 1686 | +#include <linux/init.h> |
| 1687 | +#include <linux/device.h> |
| 1688 | +#include <linux/platform_device.h> |
| 1689 | + |
| 1690 | +#include "hci_h4p.h" |
| 1691 | + |
| 1692 | +#ifdef CONFIG_SYSFS |
| 1693 | + |
| 1694 | +static ssize_t hci_h4p_store_bdaddr(struct device *dev, struct device_attribute *attr, |
| 1695 | + const char *buf, size_t count) |
| 1696 | +{ |
| 1697 | + struct hci_h4p_info *info = (struct hci_h4p_info*)dev_get_drvdata(dev); |
| 1698 | + unsigned int bdaddr[6]; |
| 1699 | + int ret, i; |
| 1700 | + |
| 1701 | + dev_info(info->dev, "HCI_H4P_STORE_BDADDR called\n"); |
| 1702 | + |
| 1703 | + ret = sscanf(buf, "%2x:%2x:%2x:%2x:%2x:%2x\n", |
| 1704 | + &bdaddr[0], &bdaddr[1], &bdaddr[2], |
| 1705 | + &bdaddr[3], &bdaddr[4], &bdaddr[5]); |
| 1706 | + |
| 1707 | + if (ret != 6) { |
| 1708 | + dev_info(info->dev, "bdaddr isn't found\n"); |
| 1709 | + return -EINVAL; |
| 1710 | + } |
| 1711 | + |
| 1712 | + //for (i = 0; i < 6; i++) |
| 1713 | + //info->bdaddr[i] = bdaddr[i] & 0xff; |
| 1714 | + |
| 1715 | + info->bdaddr[0] = 0x00; |
| 1716 | + info->bdaddr[1] = 0x1D; |
| 1717 | + info->bdaddr[2] = 0x6E; |
| 1718 | + info->bdaddr[3] = 0xD4; |
| 1719 | + info->bdaddr[4] = 0xF0; |
| 1720 | + info->bdaddr[5] = 0x37; |
| 1721 | + |
| 1722 | + return count; |
| 1723 | +} |
| 1724 | + |
| 1725 | +static ssize_t hci_h4p_show_bdaddr(struct device *dev, struct device_attribute *attr, |
| 1726 | + char *buf) |
| 1727 | +{ |
| 1728 | + struct hci_h4p_info *info = (struct hci_h4p_info*)dev_get_drvdata(dev); |
| 1729 | + |
| 1730 | + return sprintf(buf, "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", |
| 1731 | + info->bdaddr[0], |
| 1732 | + info->bdaddr[1], |
| 1733 | + info->bdaddr[2], |
| 1734 | + info->bdaddr[3], |
| 1735 | + info->bdaddr[4], |
| 1736 | + info->bdaddr[5]); |
| 1737 | +} |
| 1738 | + |
| 1739 | +static DEVICE_ATTR(bdaddr, S_IRUGO | S_IWUSR, hci_h4p_show_bdaddr, hci_h4p_store_bdaddr); |
| 1740 | +int hci_h4p_sysfs_create_files(struct device *dev) |
| 1741 | +{ |
| 1742 | + return device_create_file(dev, &dev_attr_bdaddr); |
| 1743 | +} |
| 1744 | + |
| 1745 | +#endif |
| 1746 | --- /dev/null |
| 1747 | +++ b/drivers/bluetooth/hci_h4p/uart.c |
| 1748 | @@ -0,0 +1,169 @@ |
| 1749 | +/* |
| 1750 | + * This file is part of hci_h4p bluetooth driver |
| 1751 | + * |
| 1752 | + * Copyright (C) 2005, 2006 Nokia Corporation. |
| 1753 | + * |
| 1754 | + * Contact: Ville Tervo <ville.tervo@nokia.com> |
| 1755 | + * |
| 1756 | + * This program is free software; you can redistribute it and/or |
| 1757 | + * modify it under the terms of the GNU General Public License |
| 1758 | + * version 2 as published by the Free Software Foundation. |
| 1759 | + * |
| 1760 | + * This program is distributed in the hope that it will be useful, but |
| 1761 | + * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 1762 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 1763 | + * General Public License for more details. |
| 1764 | + * |
| 1765 | + * You should have received a copy of the GNU General Public License |
| 1766 | + * along with this program; if not, write to the Free Software |
| 1767 | + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 1768 | + * 02110-1301 USA |
| 1769 | + * |
| 1770 | + */ |
| 1771 | + |
| 1772 | +#include <linux/serial_reg.h> |
| 1773 | +#include <linux/delay.h> |
| 1774 | +#include <linux/clk.h> |
| 1775 | + |
| 1776 | +#include <asm/io.h> |
| 1777 | + |
| 1778 | +#include "hci_h4p.h" |
| 1779 | + |
| 1780 | +inline void hci_h4p_outb(struct hci_h4p_info *info, unsigned int offset, u8 val) |
| 1781 | +{ |
| 1782 | + offset <<= 2; |
| 1783 | + __raw_writeb(val, info->uart_base + offset); |
| 1784 | + //outb(val, info->uart_base + (offset << 2)); |
| 1785 | +} |
| 1786 | + |
| 1787 | +inline u8 hci_h4p_inb(struct hci_h4p_info *info, unsigned int offset) |
| 1788 | +{ |
| 1789 | + offset <<= 2; |
| 1790 | + return (u8)__raw_readb(info->uart_base + offset); |
| 1791 | + //return (unsigned int)__raw_readb(up->membase + offset); |
| 1792 | + //return inb(info->uart_base + (offset << 2)); |
| 1793 | +} |
| 1794 | + |
| 1795 | +void hci_h4p_set_rts(struct hci_h4p_info *info, int active) |
| 1796 | +{ |
| 1797 | + u8 b; |
| 1798 | + |
| 1799 | + b = hci_h4p_inb(info, UART_MCR); |
| 1800 | + if (active) |
| 1801 | + b |= UART_MCR_RTS; |
| 1802 | + else |
| 1803 | + b &= ~UART_MCR_RTS; |
| 1804 | + hci_h4p_outb(info, UART_MCR, b); |
| 1805 | +} |
| 1806 | + |
| 1807 | +int hci_h4p_wait_for_cts(struct hci_h4p_info *info, int active, |
| 1808 | + int timeout_ms) |
| 1809 | +{ |
| 1810 | + int okay; |
| 1811 | + unsigned long timeout; |
| 1812 | + |
| 1813 | + okay = 0; |
| 1814 | + timeout = jiffies + msecs_to_jiffies(timeout_ms); |
| 1815 | + for (;;) { |
| 1816 | + int state; |
| 1817 | + |
| 1818 | + state = hci_h4p_inb(info, UART_MSR) & UART_MSR_CTS; |
| 1819 | + if (active) { |
| 1820 | + if (state) |
| 1821 | + return 0; |
| 1822 | + } else { |
| 1823 | + if (!state) |
| 1824 | + return 0; |
| 1825 | + } |
| 1826 | + if (time_after(jiffies, timeout)) |
| 1827 | + return -ETIMEDOUT; |
| 1828 | + } |
| 1829 | +} |
| 1830 | + |
| 1831 | +void __hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which) |
| 1832 | +{ |
| 1833 | + u8 lcr, b; |
| 1834 | + |
| 1835 | + lcr = hci_h4p_inb(info, UART_LCR); |
| 1836 | + hci_h4p_outb(info, UART_LCR, 0xbf); |
| 1837 | + b = hci_h4p_inb(info, UART_EFR); |
| 1838 | + if (on) |
| 1839 | + b |= which; |
| 1840 | + else |
| 1841 | + b &= ~which; |
| 1842 | + hci_h4p_outb(info, UART_EFR, b); |
| 1843 | + hci_h4p_outb(info, UART_LCR, lcr); |
| 1844 | +} |
| 1845 | + |
| 1846 | +void hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which) |
| 1847 | +{ |
| 1848 | + unsigned long flags; |
| 1849 | + |
| 1850 | + spin_lock_irqsave(&info->lock, flags); |
| 1851 | + __hci_h4p_set_auto_ctsrts(info, on, which); |
| 1852 | + spin_unlock_irqrestore(&info->lock, flags); |
| 1853 | +} |
| 1854 | + |
| 1855 | +void hci_h4p_change_speed(struct hci_h4p_info *info, unsigned long speed) |
| 1856 | +{ |
| 1857 | + unsigned int divisor; |
| 1858 | + u8 lcr, mdr1; |
| 1859 | + |
| 1860 | + NBT_DBG("Setting speed %lu\n", speed); |
| 1861 | + |
| 1862 | + if (speed >= 460800) { |
| 1863 | + divisor = UART_CLOCK / 13 / speed; |
| 1864 | + mdr1 = 3; |
| 1865 | + } else { |
| 1866 | + divisor = UART_CLOCK / 16 / speed; |
| 1867 | + mdr1 = 0; |
| 1868 | + } |
| 1869 | + |
| 1870 | + hci_h4p_outb(info, UART_OMAP_MDR1, 7); /* Make sure UART mode is disabled */ |
| 1871 | + lcr = hci_h4p_inb(info, UART_LCR); |
| 1872 | + hci_h4p_outb(info, UART_LCR, UART_LCR_DLAB); /* Set DLAB */ |
| 1873 | + hci_h4p_outb(info, UART_DLL, divisor & 0xff); /* Set speed */ |
| 1874 | + hci_h4p_outb(info, UART_DLM, divisor >> 8); |
| 1875 | + hci_h4p_outb(info, UART_LCR, lcr); |
| 1876 | + hci_h4p_outb(info, UART_OMAP_MDR1, mdr1); /* Make sure UART mode is enabled */ |
| 1877 | +} |
| 1878 | + |
| 1879 | +int hci_h4p_reset_uart(struct hci_h4p_info *info) |
| 1880 | +{ |
| 1881 | + int count = 0; |
| 1882 | + |
| 1883 | + /* Reset the UART */ |
| 1884 | + hci_h4p_outb(info, UART_OMAP_SYSC, UART_SYSC_OMAP_RESET); |
| 1885 | + while (!(hci_h4p_inb(info, UART_OMAP_SYSS) & UART_SYSS_RESETDONE)) { |
| 1886 | + if (count++ > 20000) { |
| 1887 | + dev_err(info->dev, "hci_h4p: UART reset timeout\n"); |
| 1888 | + return -ENODEV; |
| 1889 | + } |
| 1890 | + udelay(1); |
| 1891 | + } |
| 1892 | + |
| 1893 | + return 0; |
| 1894 | +} |
| 1895 | + |
| 1896 | +int hci_h4p_init_uart(struct hci_h4p_info *info) |
| 1897 | +{ |
| 1898 | + int err; |
| 1899 | + |
| 1900 | + err = hci_h4p_reset_uart(info); |
| 1901 | + if (err < 0) |
| 1902 | + return err; |
| 1903 | + |
| 1904 | + /* Enable and setup FIFO */ |
| 1905 | + hci_h4p_outb(info, UART_LCR, UART_LCR_WLEN8); |
| 1906 | + hci_h4p_outb(info, UART_OMAP_MDR1, 0x00); /* Make sure UART mode is enabled */ |
| 1907 | + hci_h4p_outb(info, UART_OMAP_SCR, 0x80); |
| 1908 | + hci_h4p_outb(info, UART_EFR, UART_EFR_ECB); |
| 1909 | + hci_h4p_outb(info, UART_MCR, UART_MCR_TCRTLR); |
| 1910 | + hci_h4p_outb(info, UART_TI752_TLR, 0x1f); |
| 1911 | + hci_h4p_outb(info, UART_TI752_TCR, 0xef); |
| 1912 | + hci_h4p_outb(info, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | |
| 1913 | + UART_FCR_CLEAR_XMIT | UART_FCR_R_TRIG_00); |
| 1914 | + hci_h4p_outb(info, UART_IER, UART_IER_RDI); |
| 1915 | + |
| 1916 | + return 0; |
| 1917 | +} |
| 1918 | --- a/drivers/bluetooth/Kconfig |
| 1919 | +++ b/drivers/bluetooth/Kconfig |
| 1920 | @@ -173,6 +173,16 @@ config BT_HCIBTUART |
| 1921 | Say Y here to compile support for HCI UART devices into the |
| 1922 | kernel or say M to compile it as module (btuart_cs). |
| 1923 | |
| 1924 | +config BT_HCIH4P |
| 1925 | + tristate "HCI driver with H4 Nokia extensions" |
| 1926 | + depends on BT && ARCH_OMAP |
| 1927 | + help |
| 1928 | + Bluetooth HCI driver with H4 extensions. This driver provides |
| 1929 | + support for H4+ Bluetooth chip with vendor-specific H4 extensions. |
| 1930 | + |
| 1931 | + Say Y here to compile support for h4 extended devices into the kernel |
| 1932 | + or say M to compile it as module (hci_h4p). |
| 1933 | + |
| 1934 | config BT_HCIVHCI |
| 1935 | tristate "HCI VHCI (Virtual HCI device) driver" |
| 1936 | help |
| 1937 | --- a/drivers/bluetooth/Makefile |
| 1938 | +++ b/drivers/bluetooth/Makefile |
| 1939 | @@ -11,6 +11,7 @@ obj-$(CONFIG_BT_HCIDTL1) += dtl1_cs.o |
| 1940 | obj-$(CONFIG_BT_HCIBT3C) += bt3c_cs.o |
| 1941 | obj-$(CONFIG_BT_HCIBLUECARD) += bluecard_cs.o |
| 1942 | obj-$(CONFIG_BT_HCIBTUART) += btuart_cs.o |
| 1943 | +obj-$(CONFIG_BT_HCIH4P) += hci_h4p/ |
| 1944 | |
| 1945 | obj-$(CONFIG_BT_HCIBTUSB) += btusb.o |
| 1946 | obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o |
| 1947 | |