Root/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c

1/*
2 * arch/arm/mach-orion5x/dt2-setup.c
3 *
4 * Freecom DataTank Gateway Setup
5 *
6 * Copyright (C) 2009 Zintis Petersons <Zintis.Petersons@abcsolutions.lv>
7 *
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
11 */
12
13#include <linux/kernel.h>
14#include <linux/init.h>
15#include <linux/platform_device.h>
16#include <linux/pci.h>
17#include <linux/irq.h>
18#include <linux/mtd/physmap.h>
19#include <linux/mv643xx_eth.h>
20#include <linux/ethtool.h>
21#include <linux/if_ether.h>
22#include <net/dsa.h>
23#include <linux/ata_platform.h>
24#include <linux/i2c.h>
25#include <linux/reboot.h>
26#include <linux/interrupt.h>
27#include <asm/mach-types.h>
28#include <asm/gpio.h>
29#include <asm/leds.h>
30#include <asm/mach/arch.h>
31#include <asm/mach/pci.h>
32#include <mach/orion5x.h>
33#include "common.h"
34#include "mpp.h"
35
36/*****************************************************************************
37 * DT2 local
38 ****************************************************************************/
39#include <asm/setup.h>
40#include "dt2-common.h"
41
42u32 mvUbootVer = 0;
43u32 mvTclk = 166666667;
44u32 mvSysclk = 200000000;
45u32 mvIsUsbHost = 1;
46u32 overEthAddr = 0;
47u32 gBoardId = -1;
48struct DT2_EEPROM_STRUCT dt2_eeprom;
49
50/*****************************************************************************
51 * DT2 Info
52 ****************************************************************************/
53/*
54 * PCI
55 */
56
57#define DT2_PCI_SLOT0_OFFS 7
58#define DT2_PCI_SLOT0_IRQ_A_PIN 3
59#define DT2_PCI_SLOT0_IRQ_B_PIN 2
60
61#define DT2_PIN_GPIO_SYNC 25
62#define DT2_PIN_GPIO_POWER 24
63#define DT2_PIN_GPIO_UNPLUG1 23
64#define DT2_PIN_GPIO_UNPLUG2 22
65#define DT2_PIN_GPIO_RESET 4
66
67#define DT2_NOR_BOOT_BASE 0xf4000000
68#define DT2_NOR_BOOT_SIZE SZ_512K
69
70#define DT2_LEDS_BASE 0xfa000000
71#define DT2_LEDS_SIZE SZ_1K
72
73/*****************************************************************************
74 * 512K NOR Flash on Device bus Boot CS
75 ****************************************************************************/
76
77static struct mtd_partition dt2_partitions[] = {
78    {
79        .name = "u-boot",
80        .size = 0x00080000,
81        .offset = 0,
82    },
83};
84
85static struct physmap_flash_data dt2_nor_flash_data = {
86    .width = 1, /* 8 bit bus width */
87    .parts = dt2_partitions,
88    .nr_parts = ARRAY_SIZE(dt2_partitions)
89};
90
91static struct resource dt2_nor_flash_resource = {
92    .flags = IORESOURCE_MEM,
93    .start = DT2_NOR_BOOT_BASE,
94    .end = DT2_NOR_BOOT_BASE + DT2_NOR_BOOT_SIZE - 1,
95};
96
97static struct platform_device dt2_nor_flash = {
98    .name = "physmap-flash",
99    .id = 0,
100    .dev = {
101        .platform_data = &dt2_nor_flash_data,
102    },
103    .resource = &dt2_nor_flash_resource,
104    .num_resources = 1,
105};
106
107/*****************************************************************************
108 * PCI
109 ****************************************************************************/
110
111void __init dt2_pci_preinit(void)
112{
113    int pin, irq;
114
115    /*
116     * Configure PCI GPIO IRQ pins
117     */
118    pin = DT2_PCI_SLOT0_IRQ_A_PIN;
119    if (gpio_request(pin, "PCI IntA") == 0) {
120        if (gpio_direction_input(pin) == 0) {
121            irq = gpio_to_irq(pin);
122            irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
123            printk (KERN_INFO "PCI IntA IRQ: %d\n", irq);
124        } else {
125            printk(KERN_ERR "dt2_pci_preinit failed to "
126                    "irq_set_irq_type pin %d\n", pin);
127            gpio_free(pin);
128        }
129    } else {
130        printk(KERN_ERR "dt2_pci_preinit failed to request gpio %d\n", pin);
131    }
132
133    pin = DT2_PCI_SLOT0_IRQ_B_PIN;
134    if (gpio_request(pin, "PCI IntB") == 0) {
135        if (gpio_direction_input(pin) == 0) {
136            irq = gpio_to_irq(pin);
137            irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
138            printk (KERN_INFO "PCI IntB IRQ: %d\n", irq);
139        } else {
140            printk(KERN_ERR "dt2_pci_preinit failed to "
141                    "irq_set_irq_type pin %d\n", pin);
142            gpio_free(pin);
143        }
144    } else {
145        printk(KERN_ERR "dt2_pci_preinit failed to gpio_request %d\n", pin);
146    }
147}
148
149static int __init dt2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
150{
151    int irq;
152
153    /*
154     * Check for devices with hard-wired IRQs.
155     */
156    irq = orion5x_pci_map_irq(dev, slot, pin);
157    if (irq != -1){
158        printk(KERN_INFO "orion5x_pci_map_irq: %d\n", irq);
159        return irq;
160    }
161
162    /*
163     * PCI IRQs are connected via GPIOs
164     */
165    switch (slot - DT2_PCI_SLOT0_OFFS) {
166    case 0:
167        if (pin == 1){
168            irq = gpio_to_irq(DT2_PCI_SLOT0_IRQ_A_PIN);
169            printk(KERN_INFO "dt2_pci_map_irq DT2_PCI_SLOT0_IRQ_A_PIN: %d\n", irq);
170        }
171        else {
172            irq = gpio_to_irq(DT2_PCI_SLOT0_IRQ_B_PIN);
173            printk(KERN_INFO "dt2_pci_map_irq DT2_PCI_SLOT0_IRQ_B_PIN: %d\n", irq);
174        }
175    default:
176        irq = -1;
177            printk(KERN_INFO "dt2_pci_map_irq IRQ: %d\n", irq);
178    }
179
180    return irq;
181}
182
183static struct hw_pci dt2_pci __initdata = {
184    .nr_controllers = 2,
185    .preinit = dt2_pci_preinit,
186    .swizzle = pci_std_swizzle,
187    .setup = orion5x_pci_sys_setup,
188    .scan = orion5x_pci_sys_scan_bus,
189    .map_irq = dt2_pci_map_irq,
190};
191
192static int __init dt2_pci_init(void)
193{
194    if (machine_is_dt2())
195        pci_common_init(&dt2_pci);
196
197    return 0;
198}
199
200subsys_initcall(dt2_pci_init);
201
202/*****************************************************************************
203 * Ethernet
204 ****************************************************************************/
205
206static struct mv643xx_eth_platform_data dt2_eth_data = {
207    .phy_addr = MV643XX_ETH_PHY_NONE,
208    .speed = SPEED_1000,
209    .duplex = DUPLEX_FULL,
210};
211
212static struct dsa_chip_data dt2_switch_chip_data = {
213    .port_names[0] = "wan",
214    .port_names[1] = "lan1",
215    .port_names[2] = "lan2",
216    .port_names[3] = "cpu",
217    .port_names[4] = "lan3",
218    .port_names[5] = "lan4",
219};
220
221static struct dsa_platform_data dt2_switch_plat_data = {
222    .nr_chips = 1,
223    .chip = &dt2_switch_chip_data,
224};
225
226/*****************************************************************************
227 * RTC ISL1208 on I2C bus
228 ****************************************************************************/
229static struct i2c_board_info __initdata dt2_i2c_rtc = {
230    I2C_BOARD_INFO("isl1208", 0x6F),
231};
232
233/*****************************************************************************
234 * Sata
235 ****************************************************************************/
236static struct mv_sata_platform_data dt2_sata_data = {
237    .n_ports = 2,
238};
239
240/*****************************************************************************
241 * General Setup
242 ****************************************************************************/
243static unsigned int dt2_mpp_modes[] __initdata = {
244    MPP0_GPIO, // RTC interrupt
245    MPP1_GPIO, // 88e6131 interrupt
246    MPP2_GPIO, // PCI_intB
247    MPP3_GPIO, // PCI_intA
248    MPP4_GPIO, // reset button switch
249    MPP5_GPIO,
250    MPP6_GPIO,
251    MPP7_GPIO,
252    MPP8_GPIO,
253    MPP9_GIGE, /* GE_RXERR */
254    MPP10_GPIO, // usb
255    MPP11_GPIO, // usb
256    MPP12_GIGE, // GE_TXD[4]
257    MPP13_GIGE, // GE_TXD[5]
258    MPP14_GIGE, // GE_TXD[6]
259    MPP15_GIGE, // GE_TXD[7]
260    MPP16_GIGE, // GE_RXD[4]
261    MPP17_GIGE, // GE_RXD[5]
262    MPP18_GIGE, // GE_RXD[6]
263    MPP19_GIGE, // GE_RXD[7]
264    0,
265};
266
267/*****************************************************************************
268 * LEDS
269 ****************************************************************************/
270static struct platform_device dt2_leds = {
271    .name = "dt2-led",
272    .id = -1,
273};
274
275/****************************************************************************
276 * GPIO key
277 ****************************************************************************/
278static irqreturn_t dt2_reset_handler(int irq, void *dev_id)
279{
280    /* This is the paper-clip reset which does an emergency reboot. */
281    printk(KERN_INFO "Restarting system.\n");
282    machine_restart(NULL);
283
284    /* This should never be reached. */
285    return IRQ_HANDLED;
286}
287
288static irqreturn_t dt2_power_handler(int irq, void *dev_id)
289{
290    printk(KERN_INFO "Shutting down system.\n");
291    machine_power_off();
292    return IRQ_HANDLED;
293}
294
295static void __init dt2_init(void)
296{
297    /*
298     * Setup basic Orion functions. Need to be called early.
299     */
300    orion5x_init();
301
302    orion5x_mpp_conf(dt2_mpp_modes);
303
304    /*
305     * Configure peripherals.
306     */
307
308    orion5x_uart0_init();
309    orion5x_ehci0_init();
310    orion5x_ehci1_init();
311    orion5x_i2c_init();
312    orion5x_sata_init(&dt2_sata_data);
313    orion5x_xor_init();
314
315    printk(KERN_INFO "U-Boot parameters:\n");
316    printk(KERN_INFO "Sys Clk = %d, Tclk = %d, BoardID = 0x%02x\n", mvSysclk, mvTclk, gBoardId);
317
318    printk(KERN_INFO "Serial: %s\n", dt2_eeprom.fc.dt2_serial_number);
319    printk(KERN_INFO "Revision: %016x\n", dt2_eeprom.fc.dt2_revision);
320    printk(KERN_INFO "DT2: Using MAC address %pM for port 0\n",
321           dt2_eeprom.gw.mac_addr[0]);
322    printk(KERN_INFO "DT2: Using MAC address %pM for port 1\n",
323           dt2_eeprom.gw.mac_addr[1]);
324
325    orion5x_eth_init(&dt2_eth_data);
326    memcpy(dt2_eth_data.mac_addr, dt2_eeprom.gw.mac_addr[0], 6);
327    orion5x_eth_switch_init(&dt2_switch_plat_data, NO_IRQ);
328
329    i2c_register_board_info(0, &dt2_i2c_rtc, 1);
330
331    orion5x_setup_dev_boot_win(DT2_NOR_BOOT_BASE, DT2_NOR_BOOT_SIZE);
332    platform_device_register(&dt2_nor_flash);
333
334    orion5x_setup_dev0_win(DT2_LEDS_BASE, DT2_LEDS_SIZE);
335    platform_device_register(&dt2_leds);
336
337    if (request_irq(gpio_to_irq(DT2_PIN_GPIO_RESET), &dt2_reset_handler,
338            IRQF_DISABLED | IRQF_TRIGGER_LOW,
339            "DT2: Reset button", NULL) < 0) {
340
341        printk("DT2: Reset Button IRQ %d not available\n",
342            gpio_to_irq(DT2_PIN_GPIO_RESET));
343    }
344
345    if (request_irq(gpio_to_irq(DT2_PIN_GPIO_POWER), &dt2_power_handler,
346            IRQF_DISABLED | IRQF_TRIGGER_LOW,
347            "DT2: Power button", NULL) < 0) {
348
349        printk(KERN_DEBUG "DT2: Power Button IRQ %d not available\n",
350            gpio_to_irq(DT2_PIN_GPIO_POWER));
351    }
352}
353
354static int __init parse_tag_dt2_uboot(const struct tag *t)
355{
356    struct tag_mv_uboot *mv_uboot;
357        
358    // Get pointer to our block
359    mv_uboot = (struct tag_mv_uboot*)&t->u;
360    mvTclk = mv_uboot->tclk;
361    mvSysclk = mv_uboot->sysclk;
362    mvUbootVer = mv_uboot->uboot_version;
363    mvIsUsbHost = mv_uboot->isUsbHost;
364
365    // Some clock fixups
366    if(mvTclk == 166000000) mvTclk = 166666667;
367    else if(mvTclk == 133000000) mvTclk = 133333333;
368    else if(mvSysclk == 166000000) mvSysclk = 166666667;
369
370    gBoardId = (mvUbootVer & 0xff);
371            
372    //DT2 specific data
373    memcpy(&dt2_eeprom, mv_uboot->dt2_eeprom, sizeof(struct DT2_EEPROM_STRUCT));
374
375    return 0;
376}
377__tagtable(ATAG_MV_UBOOT, parse_tag_dt2_uboot);
378
379/*
380 * This is OpenWrt specific fixup. It includes code from original "tag_fixup_mem32" to
381 * fixup bogus memory tags and also fixes kernel cmdline by adding " init=/etc/preinit"
382 * at the end. It is important to flash OpenWrt image from original Freecom firmware.
383 *
384 * Vanilla kernel should use "tag_fixup_mem32" function.
385 */
386void __init openwrt_fixup(struct machine_desc *mdesc, struct tag *t,
387                char **from, struct meminfo *meminfo)
388{
389    char *p = NULL;
390    static char openwrt_init_tag[] __initdata = " init=/etc/preinit";
391
392    for (; t->hdr.size; t = tag_next(t)){
393        /* Locate the Freecom cmdline */
394        if (t->hdr.tag == ATAG_CMDLINE) {
395            p = t->u.cmdline.cmdline;
396            printk("%s(%d): Found cmdline '%s' at 0x%0lx\n",
397                   __FUNCTION__, __LINE__, p, (unsigned long)p);
398        }
399        /*
400         * Many orion-based systems have buggy bootloader implementations.
401         * This is a common fixup for bogus memory tags.
402         */
403        if (t->hdr.tag == ATAG_MEM &&
404            (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK ||
405             t->u.mem.start & ~PAGE_MASK)) {
406            printk(KERN_WARNING
407                   "Clearing invalid memory bank %dKB@0x%08x\n",
408                   t->u.mem.size / 1024, t->u.mem.start);
409            t->hdr.tag = 0;
410        }
411    }
412
413    printk("%s(%d): End of table at 0x%0lx\n", __FUNCTION__, __LINE__, (unsigned long)t);
414
415    /* Overwrite the end of the table with a new cmdline tag. */
416    t->hdr.tag = ATAG_CMDLINE;
417    t->hdr.size =
418        (sizeof (struct tag_header) +
419         strlen(p) + strlen(openwrt_init_tag) + 1 + 4) >> 2;
420
421    strlcpy(t->u.cmdline.cmdline, p, COMMAND_LINE_SIZE);
422    strlcpy(t->u.cmdline.cmdline + strlen(p), openwrt_init_tag,
423        COMMAND_LINE_SIZE - strlen(p));
424
425    printk("%s(%d): New cmdline '%s' at 0x%0lx\n",
426           __FUNCTION__, __LINE__,
427           t->u.cmdline.cmdline, (unsigned long)t->u.cmdline.cmdline);
428
429    t = tag_next(t);
430
431    printk("%s(%d): New end of table at 0x%0lx\n", __FUNCTION__, __LINE__, (unsigned long)t);
432
433    t->hdr.tag = ATAG_NONE;
434    t->hdr.size = 0;
435}
436
437/* Warning: Freecom uses their own custom bootloader with mach-type (=1500) */
438MACHINE_START(DT2, "Freecom DataTank Gateway")
439    /* Maintainer: Zintis Petersons <Zintis.Petersons@abcsolutions.lv> */
440    .boot_params = 0x00000100,
441    .init_machine = dt2_init,
442    .map_io = orion5x_map_io,
443    .init_irq = orion5x_init_irq,
444    .timer = &orion5x_timer,
445    .fixup = openwrt_fixup, //tag_fixup_mem32,
446MACHINE_END
447

Archive Download this file

Branches:
backfire
history
master
release_2010-11-17
release_2010-12-14
release_2011-02-23
release_2011-05-28
release_2011-08-27
release_2011-11-13
release_2012-03-18
release_2012-04-09
release_2012-10-11
uclibc_nptl



interactive