| 1 | /* |
| 2 | * Asus RT-N15 board support |
| 3 | * |
| 4 | * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify it |
| 7 | * under the terms of the GNU General Public License version 2 as published |
| 8 | * by the Free Software Foundation. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/init.h> |
| 12 | #include <linux/platform_device.h> |
| 13 | #include <linux/rtl8366.h> |
| 14 | #include <linux/ethtool.h> |
| 15 | |
| 16 | #include <asm/mach-ralink/machine.h> |
| 17 | #include <asm/mach-ralink/dev-gpio-buttons.h> |
| 18 | #include <asm/mach-ralink/dev-gpio-leds.h> |
| 19 | #include <asm/mach-ralink/rt288x.h> |
| 20 | #include <asm/mach-ralink/rt288x_regs.h> |
| 21 | #include <asm/mach-ralink/ramips_eth_platform.h> |
| 22 | |
| 23 | #include "devices.h" |
| 24 | |
| 25 | #define RT_N15_GPIO_LED_POWER 11 |
| 26 | #define RT_N15_GPIO_BUTTON_WPS 0 |
| 27 | #define RT_N15_GPIO_BUTTON_RESET 12 |
| 28 | |
| 29 | #define RT_N15_GPIO_RTL8366_SCK 2 |
| 30 | #define RT_N15_GPIO_RTL8366_SDA 1 |
| 31 | |
| 32 | #define RT_N15_KEYS_POLL_INTERVAL 20 |
| 33 | #define RT_N15_KEYS_DEBOUNCE_INTERVAL (3 * RT_N15_KEYS_POLL_INTERVAL) |
| 34 | |
| 35 | static struct gpio_led rt_n15_leds_gpio[] __initdata = { |
| 36 | { |
| 37 | .name = "rt-n15:blue:power", |
| 38 | .gpio = RT_N15_GPIO_LED_POWER, |
| 39 | .active_low = 1, |
| 40 | } |
| 41 | }; |
| 42 | |
| 43 | static struct gpio_keys_button rt_n15_gpio_buttons[] __initdata = { |
| 44 | { |
| 45 | .desc = "reset", |
| 46 | .type = EV_KEY, |
| 47 | .code = KEY_RESTART, |
| 48 | .debounce_interval = RT_N15_KEYS_DEBOUNCE_INTERVAL, |
| 49 | .gpio = RT_N15_GPIO_BUTTON_RESET, |
| 50 | .active_low = 1, |
| 51 | }, { |
| 52 | .desc = "wps", |
| 53 | .type = EV_KEY, |
| 54 | .code = KEY_WPS_BUTTON, |
| 55 | .debounce_interval = RT_N15_KEYS_DEBOUNCE_INTERVAL, |
| 56 | .gpio = RT_N15_GPIO_BUTTON_WPS, |
| 57 | .active_low = 1, |
| 58 | } |
| 59 | }; |
| 60 | |
| 61 | static struct rtl8366_platform_data rt_n15_rtl8366s_data = { |
| 62 | .gpio_sda = RT_N15_GPIO_RTL8366_SDA, |
| 63 | .gpio_sck = RT_N15_GPIO_RTL8366_SCK, |
| 64 | }; |
| 65 | |
| 66 | static struct platform_device rt_n15_rtl8366s_device = { |
| 67 | .name = RTL8366S_DRIVER_NAME, |
| 68 | .id = -1, |
| 69 | .dev = { |
| 70 | .platform_data = &rt_n15_rtl8366s_data, |
| 71 | } |
| 72 | }; |
| 73 | |
| 74 | static void __init rt_n15_init(void) |
| 75 | { |
| 76 | rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C); |
| 77 | |
| 78 | rt288x_register_flash(0); |
| 79 | |
| 80 | ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n15_leds_gpio), |
| 81 | rt_n15_leds_gpio); |
| 82 | |
| 83 | ramips_register_gpio_buttons(-1, RT_N15_KEYS_POLL_INTERVAL, |
| 84 | ARRAY_SIZE(rt_n15_gpio_buttons), |
| 85 | rt_n15_gpio_buttons); |
| 86 | |
| 87 | platform_device_register(&rt_n15_rtl8366s_device); |
| 88 | |
| 89 | rt288x_register_wifi(); |
| 90 | |
| 91 | rt288x_eth_data.speed = SPEED_1000; |
| 92 | rt288x_eth_data.duplex = DUPLEX_FULL; |
| 93 | rt288x_eth_data.tx_fc = 1; |
| 94 | rt288x_eth_data.rx_fc = 1; |
| 95 | rt288x_register_ethernet(); |
| 96 | rt288x_register_wdt(); |
| 97 | } |
| 98 | |
| 99 | MIPS_MACHINE(RAMIPS_MACH_RT_N15, "RT-N15", "Asus RT-N15", rt_n15_init); |
| 100 | |
