| 1 | /* |
| 2 | * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org> |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License as published by |
| 6 | * the Free Software Foundation; either version 2 of the License, or |
| 7 | * (at your option) any later version. |
| 8 | * |
| 9 | * This program is distributed in the hope that it will be useful, |
| 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 12 | * General Public License for more details. |
| 13 | * |
| 14 | * You should have received a copy of the GNU General Public License |
| 15 | * along with this program; if not, write to the Free Software |
| 16 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 17 | */ |
| 18 | |
| 19 | /* July 29, 2004 |
| 20 | * |
| 21 | * This is a hacked replacement for the 'addpattern' utility used to |
| 22 | * create wrt54g .bin firmware files. It isn't pretty, but it does |
| 23 | * the job for me. |
| 24 | * |
| 25 | * Extensions: |
| 26 | * -v allows setting the version string on the command line. |
| 27 | * -{0|1} sets the (currently ignored) hw_ver flag in the header |
| 28 | * to 0 or 1 respectively. |
| 29 | */ |
| 30 | |
| 31 | /* January 12, 2005 |
| 32 | * |
| 33 | * Modified by rodent at rodent dot za dot net |
| 34 | * Support added for the new WRT54G v2.2 and WRT54GS v1.1 "flags" |
| 35 | * Without the flags set to 0x7, the above units will refuse to flash. |
| 36 | * |
| 37 | * Extensions: |
| 38 | * -{0|1|2} sets {0|1} sets hw_ver flag to 0/1. {2} sets hw_ver to 1 |
| 39 | * and adds the new hardware "flags" for the v2.2/v1.1 units |
| 40 | */ |
| 41 | |
| 42 | /* January 1, 2007 |
| 43 | * |
| 44 | * Modified by juan.i.gonzalez at subdown dot net |
| 45 | * Support added for the AG241v2 and similar |
| 46 | * |
| 47 | * Extensions: |
| 48 | * -r #.# adds revision hardware flags. AG241v2 and similar. |
| 49 | * |
| 50 | * AG241V2 firmware sets the hw_ver to 0x44. |
| 51 | * |
| 52 | * Example: -r 2.0 |
| 53 | * |
| 54 | * Convert 2.0 to 20 to be an integer, and add 0x30 to skip special ASCII |
| 55 | * #define HW_Version ((HW_REV * 10) + 0x30) -> from cyutils.h |
| 56 | */ |
| 57 | |
| 58 | #include <stdio.h> |
| 59 | #include <stdlib.h> |
| 60 | #include <string.h> |
| 61 | #include <time.h> |
| 62 | #include <unistd.h> |
| 63 | #include <sys/stat.h> |
| 64 | |
| 65 | /**********************************************************************/ |
| 66 | |
| 67 | #define CODE_ID "U2ND" /* from code_pattern.h */ |
| 68 | #define CODE_PATTERN "W54S" /* from code_pattern.h */ |
| 69 | #define PBOT_PATTERN "PBOT" |
| 70 | |
| 71 | #define CYBERTAN_VERSION "v3.37.2" /* from cyutils.h */ |
| 72 | |
| 73 | /* WRT54G v2.2 and WRT54GS v1.1 "flags" (from 3.37.32 firmware cyutils.h) */ |
| 74 | #define SUPPORT_4712_CHIP 0x0001 |
| 75 | #define SUPPORT_INTEL_FLASH 0x0002 |
| 76 | #define SUPPORT_5325E_SWITCH 0x0004 |
| 77 | /* (from 3.00.24 firmware cyutils.h) */ |
| 78 | #define SUPPORT_4704_CHIP 0x0008 |
| 79 | #define SUPPORT_5352E_CHIP 0x0010 |
| 80 | |
| 81 | struct code_header { /* from cyutils.h */ |
| 82 | char magic[4]; |
| 83 | char res1[4]; /* for extra magic */ |
| 84 | char fwdate[3]; |
| 85 | char fwvern[3]; |
| 86 | char id[4]; /* U2ND */ |
| 87 | char hw_ver; /* 0: for 4702, 1: for 4712 -- new in 2.04.3 */ |
| 88 | |
| 89 | unsigned char sn; // Serial Number |
| 90 | unsigned char flags[2]; /* SUPPORT_ flags new for 3.37.2 (WRT54G v2.2 and WRT54GS v1.1) */ |
| 91 | unsigned char stable[2]; // The image is stable (for dual image) |
| 92 | unsigned char try1[2]; // Try to boot image first time (for dual image) |
| 93 | unsigned char try2[2]; // Try to boot image second time (for dual image) |
| 94 | unsigned char try3[2]; // Try to boot image third time (for dual_image) |
| 95 | unsigned char res3[2]; |
| 96 | } ; |
| 97 | |
| 98 | struct board_info { |
| 99 | char *id; |
| 100 | char *pattern; |
| 101 | char hw_ver; |
| 102 | char sn; |
| 103 | char flags[2]; |
| 104 | }; |
| 105 | |
| 106 | struct board_info boards[] = { |
| 107 | { |
| 108 | .id = "WRT160NL", |
| 109 | .pattern = "NL16", |
| 110 | .hw_ver = 0x00, |
| 111 | .sn = 0x0f, |
| 112 | .flags = {0x3f, 0x00}, |
| 113 | }, { |
| 114 | /* Terminating entry */ |
| 115 | .id = NULL, |
| 116 | } |
| 117 | }; |
| 118 | |
| 119 | /**********************************************************************/ |
| 120 | |
| 121 | void usage(void) __attribute__ (( __noreturn__ )); |
| 122 | |
| 123 | void usage(void) |
| 124 | { |
| 125 | fprintf(stderr, "Usage: addpattern [-i trxfile] [-o binfile] [-B board_id] [-p pattern] [-s serial] [-g] [-b] [-v v#.#.#] [-r #.#] [-{0|1|2|4|5}] -h\n"); |
| 126 | exit(EXIT_FAILURE); |
| 127 | } |
| 128 | |
| 129 | struct board_info *find_board(char *id) |
| 130 | { |
| 131 | struct board_info *board; |
| 132 | |
| 133 | for (board = boards; board->id != NULL; board++) |
| 134 | if (strcasecmp(id, board->id) == 0) |
| 135 | return board; |
| 136 | |
| 137 | return NULL; |
| 138 | } |
| 139 | |
| 140 | int main(int argc, char **argv) |
| 141 | { |
| 142 | char buf[1024]; /* keep this at 1k or adjust garbage calc below */ |
| 143 | struct code_header *hdr; |
| 144 | FILE *in = stdin; |
| 145 | FILE *out = stdout; |
| 146 | char *ifn = NULL; |
| 147 | char *ofn = NULL; |
| 148 | char *pattern = CODE_PATTERN; |
| 149 | char *pbotpat = PBOT_PATTERN; |
| 150 | char *version = CYBERTAN_VERSION; |
| 151 | char *board_id = NULL; |
| 152 | struct board_info *board = NULL; |
| 153 | int gflag = 0; |
| 154 | int pbotflag = 0; |
| 155 | int c; |
| 156 | int v0, v1, v2; |
| 157 | size_t off, n; |
| 158 | time_t t; |
| 159 | struct tm *ptm; |
| 160 | |
| 161 | fprintf(stderr, "mjn3's addpattern replacement - v0.81\n"); |
| 162 | |
| 163 | hdr = (struct code_header *) buf; |
| 164 | memset(hdr, 0, sizeof(struct code_header)); |
| 165 | |
| 166 | while ((c = getopt(argc, argv, "i:o:p:s:gbv:01245hr:B:")) != -1) { |
| 167 | switch (c) { |
| 168 | case 'i': |
| 169 | ifn = optarg; |
| 170 | break; |
| 171 | case 'o': |
| 172 | ofn = optarg; |
| 173 | break; |
| 174 | case 'p': |
| 175 | pattern = optarg; |
| 176 | break; |
| 177 | case 's': |
| 178 | hdr->sn = (unsigned char) atoi (optarg); |
| 179 | break; |
| 180 | case 'g': |
| 181 | gflag = 1; |
| 182 | break; |
| 183 | case 'b': |
| 184 | pbotflag = 1; |
| 185 | break; |
| 186 | case 'v': /* extension to allow setting version */ |
| 187 | version = optarg; |
| 188 | break; |
| 189 | case '0': |
| 190 | hdr->hw_ver = 0; |
| 191 | break; |
| 192 | case '1': |
| 193 | hdr->hw_ver = 1; |
| 194 | break; |
| 195 | case '2': /* new 54G v2.2 and 54GS v1.1 flags */ |
| 196 | hdr->hw_ver = 1; |
| 197 | hdr->flags[0] |= SUPPORT_4712_CHIP; |
| 198 | hdr->flags[0] |= SUPPORT_INTEL_FLASH; |
| 199 | hdr->flags[0] |= SUPPORT_5325E_SWITCH; |
| 200 | break; |
| 201 | case '4': |
| 202 | /* V4 firmware sets the flags to 0x1f */ |
| 203 | hdr->hw_ver = 0; |
| 204 | hdr->flags[0] = 0x1f; |
| 205 | break; |
| 206 | case '5': |
| 207 | /* V5 is appended to trxV2 image */ |
| 208 | hdr->stable[0] = 0x73; // force image to be stable |
| 209 | hdr->stable[1] = 0x00; |
| 210 | hdr->try1[0] = 0x74; // force try1 to be set |
| 211 | hdr->try1[1] = 0x00; |
| 212 | hdr->try2[0] = hdr->try2[1] = 0xFF; |
| 213 | hdr->try3[0] = hdr->try3[1] = 0xFF; |
| 214 | break; |
| 215 | case 'r': |
| 216 | hdr->hw_ver = (char)(atof(optarg)*10)+0x30; |
| 217 | break; |
| 218 | case 'B': |
| 219 | board_id = optarg; |
| 220 | break; |
| 221 | |
| 222 | case 'h': |
| 223 | default: |
| 224 | usage(); |
| 225 | } |
| 226 | } |
| 227 | |
| 228 | if (optind != argc || optind == 1) { |
| 229 | fprintf(stderr, "illegal arg \"%s\"\n", argv[optind]); |
| 230 | usage(); |
| 231 | } |
| 232 | |
| 233 | if (board_id) { |
| 234 | board = find_board(board_id); |
| 235 | if (board == NULL) { |
| 236 | fprintf(stderr, "unknown board \"%s\"\n", board_id); |
| 237 | usage(); |
| 238 | } |
| 239 | pattern = board->pattern; |
| 240 | hdr->hw_ver = board->hw_ver; |
| 241 | hdr->sn = board->sn; |
| 242 | hdr->flags[0] = board->flags[0]; |
| 243 | hdr->flags[1] = board->flags[1]; |
| 244 | } |
| 245 | |
| 246 | if (strlen(pattern) != 4) { |
| 247 | fprintf(stderr, "illegal pattern \"%s\": length != 4\n", pattern); |
| 248 | usage(); |
| 249 | } |
| 250 | |
| 251 | if (ifn && !(in = fopen(ifn, "r"))) { |
| 252 | fprintf(stderr, "can not open \"%s\" for reading\n", ifn); |
| 253 | usage(); |
| 254 | } |
| 255 | |
| 256 | if (ofn && !(out = fopen(ofn, "w"))) { |
| 257 | fprintf(stderr, "can not open \"%s\" for writing\n", ofn); |
| 258 | usage(); |
| 259 | } |
| 260 | |
| 261 | if (time(&t) == (time_t)(-1)) { |
| 262 | fprintf(stderr, "time call failed\n"); |
| 263 | return EXIT_FAILURE; |
| 264 | } |
| 265 | |
| 266 | ptm = localtime(&t); |
| 267 | |
| 268 | if (3 != sscanf(version, "v%d.%d.%d", &v0, &v1, &v2)) { |
| 269 | fprintf(stderr, "bad version string \"%s\"\n", version); |
| 270 | return EXIT_FAILURE; |
| 271 | } |
| 272 | |
| 273 | memcpy(&hdr->magic, pattern, 4); |
| 274 | if (pbotflag) |
| 275 | memcpy(&hdr->res1, pbotpat, 4); |
| 276 | hdr->fwdate[0] = ptm->tm_year % 100; |
| 277 | hdr->fwdate[1] = ptm->tm_mon + 1; |
| 278 | hdr->fwdate[2] = ptm->tm_mday; |
| 279 | hdr->fwvern[0] = v0; |
| 280 | hdr->fwvern[1] = v1; |
| 281 | hdr->fwvern[2] = v2; |
| 282 | memcpy(&hdr->id, CODE_ID, strlen(CODE_ID)); |
| 283 | |
| 284 | off = sizeof(struct code_header); |
| 285 | |
| 286 | fprintf(stderr, "writing firmware v%d.%d.%d on %d/%d/%d (y/m/d)\n", |
| 287 | v0, v1, v2, |
| 288 | hdr->fwdate[0], hdr->fwdate[1], hdr->fwdate[2]); |
| 289 | |
| 290 | |
| 291 | while ((n = fread(buf + off, 1, sizeof(buf)-off, in) + off) > 0) { |
| 292 | off = 0; |
| 293 | if (n < sizeof(buf)) { |
| 294 | if (ferror(in)) { |
| 295 | FREAD_ERROR: |
| 296 | fprintf(stderr, "fread error\n"); |
| 297 | return EXIT_FAILURE; |
| 298 | } |
| 299 | if (gflag) { |
| 300 | gflag = sizeof(buf) - n; |
| 301 | memset(buf + n, 0xff, gflag); |
| 302 | fprintf(stderr, "adding %d bytes of garbage\n", gflag); |
| 303 | n = sizeof(buf); |
| 304 | } |
| 305 | } |
| 306 | if (!fwrite(buf, n, 1, out)) { |
| 307 | FWRITE_ERROR: |
| 308 | fprintf(stderr, "fwrite error\n"); |
| 309 | return EXIT_FAILURE; |
| 310 | } |
| 311 | } |
| 312 | |
| 313 | if (ferror(in)) { |
| 314 | goto FREAD_ERROR; |
| 315 | } |
| 316 | |
| 317 | if (fflush(out)) { |
| 318 | goto FWRITE_ERROR; |
| 319 | } |
| 320 | |
| 321 | fclose(in); |
| 322 | fclose(out); |
| 323 | |
| 324 | return EXIT_SUCCESS; |
| 325 | } |
| 326 | |