Root/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c

1/*
2 * TP-LINK TL-WR741ND board support
3 *
4 * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11#include <linux/mtd/mtd.h>
12#include <linux/mtd/partitions.h>
13
14#include <asm/mach-ar71xx/ar71xx.h>
15
16#include "machtype.h"
17#include "devices.h"
18#include "dev-m25p80.h"
19#include "dev-ap91-eth.h"
20#include "dev-ap91-pci.h"
21#include "dev-gpio-buttons.h"
22#include "dev-leds-gpio.h"
23
24#define TL_WR741ND_GPIO_LED_QSS 0
25#define TL_WR741ND_GPIO_LED_SYSTEM 1
26
27#define TL_WR741ND_GPIO_BTN_RESET 11
28#define TL_WR741ND_GPIO_BTN_QSS 12
29
30#define TL_WR741ND_BUTTONS_POLL_INTERVAL 20
31
32#ifdef CONFIG_MTD_PARTITIONS
33static struct mtd_partition tl_wr741nd_partitions[] = {
34    {
35        .name = "u-boot",
36        .offset = 0,
37        .size = 0x020000,
38        .mask_flags = MTD_WRITEABLE,
39    } , {
40        .name = "kernel",
41        .offset = 0x020000,
42        .size = 0x140000,
43    } , {
44        .name = "rootfs",
45        .offset = 0x160000,
46        .size = 0x290000,
47    } , {
48        .name = "art",
49        .offset = 0x3f0000,
50        .size = 0x010000,
51        .mask_flags = MTD_WRITEABLE,
52    } , {
53        .name = "firmware",
54        .offset = 0x020000,
55        .size = 0x3d0000,
56    }
57};
58#endif /* CONFIG_MTD_PARTITIONS */
59
60static struct flash_platform_data tl_wr741nd_flash_data = {
61#ifdef CONFIG_MTD_PARTITIONS
62        .parts = tl_wr741nd_partitions,
63        .nr_parts = ARRAY_SIZE(tl_wr741nd_partitions),
64#endif
65};
66
67static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
68    {
69        .name = "tl-wr741nd:green:system",
70        .gpio = TL_WR741ND_GPIO_LED_SYSTEM,
71        .active_low = 1,
72    }, {
73        .name = "tl-wr741nd:green:qss",
74        .gpio = TL_WR741ND_GPIO_LED_QSS,
75        .active_low = 1,
76    }
77};
78
79static struct gpio_button tl_wr741nd_gpio_buttons[] __initdata = {
80    {
81        .desc = "reset",
82        .type = EV_KEY,
83        .code = BTN_0,
84        .threshold = 3,
85        .gpio = TL_WR741ND_GPIO_BTN_RESET,
86        .active_low = 1,
87    }, {
88        .desc = "qss",
89        .type = EV_KEY,
90        .code = BTN_1,
91        .threshold = 3,
92        .gpio = TL_WR741ND_GPIO_BTN_QSS,
93        .active_low = 1,
94    }
95};
96
97static void __init tl_wr741nd_setup(void)
98{
99    u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
100    u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
101
102    ar71xx_add_device_m25p80(&tl_wr741nd_flash_data);
103
104    ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
105                    tl_wr741nd_leds_gpio);
106
107    ar71xx_add_device_gpio_buttons(-1, TL_WR741ND_BUTTONS_POLL_INTERVAL,
108                    ARRAY_SIZE(tl_wr741nd_gpio_buttons),
109                    tl_wr741nd_gpio_buttons);
110
111    ar71xx_eth1_data.has_ar7240_switch = 1;
112    ar71xx_set_mac_base(mac);
113
114    /* WAN port */
115    ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
116    ar71xx_eth0_data.speed = SPEED_100;
117    ar71xx_eth0_data.duplex = DUPLEX_FULL;
118
119    /* LAN ports */
120    ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
121    ar71xx_eth1_data.speed = SPEED_1000;
122    ar71xx_eth1_data.duplex = DUPLEX_FULL;
123
124    ar71xx_add_device_mdio(0x0);
125    ar71xx_add_device_eth(1);
126    ar71xx_add_device_eth(0);
127
128    ap91_pci_init(ee, mac);
129}
130MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",
131         tl_wr741nd_setup);
132

Archive Download this file



interactive