Root/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c

1/*
2 * TP-LINK TL-WR741ND board support
3 *
4 * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11#include <linux/mtd/mtd.h>
12#include <linux/mtd/partitions.h>
13
14#include <asm/mach-ar71xx/ar71xx.h>
15
16#include "machtype.h"
17#include "devices.h"
18#include "dev-m25p80.h"
19#include "dev-ap91-pci.h"
20#include "dev-gpio-buttons.h"
21#include "dev-leds-gpio.h"
22
23#define TL_WR741ND_GPIO_LED_QSS 0
24#define TL_WR741ND_GPIO_LED_SYSTEM 1
25
26#define TL_WR741ND_GPIO_BTN_RESET 11
27#define TL_WR741ND_GPIO_BTN_QSS 12
28
29#define TL_WR741ND_BUTTONS_POLL_INTERVAL 20
30
31#ifdef CONFIG_MTD_PARTITIONS
32static struct mtd_partition tl_wr741nd_partitions[] = {
33    {
34        .name = "u-boot",
35        .offset = 0,
36        .size = 0x020000,
37        .mask_flags = MTD_WRITEABLE,
38    } , {
39        .name = "kernel",
40        .offset = 0x020000,
41        .size = 0x140000,
42    } , {
43        .name = "rootfs",
44        .offset = 0x160000,
45        .size = 0x290000,
46    } , {
47        .name = "art",
48        .offset = 0x3f0000,
49        .size = 0x010000,
50        .mask_flags = MTD_WRITEABLE,
51    } , {
52        .name = "firmware",
53        .offset = 0x020000,
54        .size = 0x3d0000,
55    }
56};
57#endif /* CONFIG_MTD_PARTITIONS */
58
59static struct flash_platform_data tl_wr741nd_flash_data = {
60#ifdef CONFIG_MTD_PARTITIONS
61        .parts = tl_wr741nd_partitions,
62        .nr_parts = ARRAY_SIZE(tl_wr741nd_partitions),
63#endif
64};
65
66static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
67    {
68        .name = "tl-wr741nd:green:system",
69        .gpio = TL_WR741ND_GPIO_LED_SYSTEM,
70        .active_low = 1,
71    }, {
72        .name = "tl-wr741nd:green:qss",
73        .gpio = TL_WR741ND_GPIO_LED_QSS,
74        .active_low = 1,
75    }
76};
77
78static struct gpio_button tl_wr741nd_gpio_buttons[] __initdata = {
79    {
80        .desc = "reset",
81        .type = EV_KEY,
82        .code = BTN_0,
83        .threshold = 3,
84        .gpio = TL_WR741ND_GPIO_BTN_RESET,
85        .active_low = 1,
86    }, {
87        .desc = "qss",
88        .type = EV_KEY,
89        .code = BTN_1,
90        .threshold = 3,
91        .gpio = TL_WR741ND_GPIO_BTN_QSS,
92        .active_low = 1,
93    }
94};
95
96static void __init tl_wr741nd_setup(void)
97{
98    u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
99    u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
100
101    ar71xx_add_device_m25p80(&tl_wr741nd_flash_data);
102
103    ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
104                    tl_wr741nd_leds_gpio);
105
106    ar71xx_add_device_gpio_buttons(-1, TL_WR741ND_BUTTONS_POLL_INTERVAL,
107                    ARRAY_SIZE(tl_wr741nd_gpio_buttons),
108                    tl_wr741nd_gpio_buttons);
109
110    ar71xx_eth1_data.has_ar7240_switch = 1;
111    ar71xx_set_mac_base(mac);
112
113    /* WAN port */
114    ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
115    ar71xx_eth0_data.speed = SPEED_100;
116    ar71xx_eth0_data.duplex = DUPLEX_FULL;
117
118    /* LAN ports */
119    ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
120    ar71xx_eth1_data.speed = SPEED_1000;
121    ar71xx_eth1_data.duplex = DUPLEX_FULL;
122
123    ar71xx_add_device_mdio(0x0);
124    ar71xx_add_device_eth(1);
125    ar71xx_add_device_eth(0);
126
127    ap91_pci_setup_wmac_led_pin(1);
128
129    ap91_pci_init(ee, mac);
130}
131MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",
132         tl_wr741nd_setup);
133

Archive Download this file



interactive