| 1 | --- a/configure.in |
| 2 | +++ b/configure.in |
| 3 | @@ -333,12 +333,12 @@ AC_ARG_ENABLE(ifxos-include, |
| 4 | echo Set the lib_ifxos include path $enableval |
| 5 | AC_SUBST([IFXOS_INCLUDE_PATH],[$enableval]) |
| 6 | else |
| 7 | - echo -e Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH |
| 8 | + echo Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH |
| 9 | AC_SUBST([IFXOS_INCLUDE_PATH],[$DEFAULT_IFXOS_INCLUDE_PATH]) |
| 10 | fi |
| 11 | ], |
| 12 | [ |
| 13 | - echo -e Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH |
| 14 | + echo Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH |
| 15 | AC_SUBST([IFXOS_INCLUDE_PATH],[$DEFAULT_IFXOS_INCLUDE_PATH]) |
| 16 | ] |
| 17 | ) |
| 18 | @@ -1702,73 +1702,73 @@ dnl Set the configure params for dist ch |
| 19 | AC_SUBST([DISTCHECK_CONFIGURE_PARAMS],[$CONFIGURE_OPTIONS]) |
| 20 | |
| 21 | AC_CONFIG_COMMANDS_PRE([ |
| 22 | -echo -e "------------------------------------------------------------------------" |
| 23 | -echo -e " Configuration for drv_dsl_cpe_api:" |
| 24 | -echo -e " Configure model type: $DSL_CONFIG_MODEL_TYPE" |
| 25 | -echo -e " Source code location: $srcdir" |
| 26 | -echo -e " Compiler: $CC" |
| 27 | -echo -e " Compiler c-flags: $CFLAGS" |
| 28 | -echo -e " Extra compiler c-flags: $EXTRA_DRV_CFLAGS" |
| 29 | -echo -e " Host System Type: $host" |
| 30 | -echo -e " Install path: $prefix" |
| 31 | -echo -e " Linux kernel include path: $KERNEL_INCL_PATH" |
| 32 | -echo -e " Linux kernel build path: $KERNEL_BUILD_PATH" |
| 33 | -echo -e " Linux kernel architecture: $KERNEL_ARCH" |
| 34 | -echo -e " Include IFXOS: $INCLUDE_DSL_CPE_API_IFXOS_SUPPORT" |
| 35 | -echo -e " IFXOS include path: $IFXOS_INCLUDE_PATH" |
| 36 | -echo -e " Driver Include Path $DSL_DRIVER_INCL_PATH" |
| 37 | -echo -e " DSL device: $DSL_DEVICE_NAME" |
| 38 | -echo -e " Max device number: $DSL_DRV_MAX_DEVICE_NUMBER" |
| 39 | -echo -e " Channels per line: $DSL_CHANNELS_PER_LINE" |
| 40 | -echo -e " Build lib (only for kernel 2.6) $DSL_CPE_API_LIBRARY_BUILD_2_6" |
| 41 | -echo -e " DSL data led flash frequency: $DSL_DATA_LED_FLASH_FREQUENCY Hz" |
| 42 | -echo -e " Disable debug prints: $DSL_DEBUG_DISABLE" |
| 43 | -echo -e " Preselection of max. debug level: $DSL_DBG_MAX_LEVEL_SET" |
| 44 | -echo -e " Preselected max. debug level: $DSL_DBG_MAX_LEVEL_PRE" |
| 45 | -echo -e " Include deprecated functions: $INCLUDE_DEPRECATED" |
| 46 | -echo -e " Include Device Exception Codes: $INCLUDE_DEVICE_EXCEPTION_CODES" |
| 47 | -echo -e " Include FW request support: $INCLUDE_FW_REQUEST_SUPPORT" |
| 48 | -echo -e " Include ADSL trace buffer: $INCLUDE_DSL_CPE_TRACE_BUFFER" |
| 49 | -echo -e " Include ADSL MIB: $INCLUDE_DSL_ADSL_MIB" |
| 50 | -echo -e " Include ADSL LED: $INCLUDE_ADSL_LED" |
| 51 | -echo -e " Include CEOC: $INCLUDE_DSL_CEOC" |
| 52 | -echo -e " Include config get support: $INCLUDE_DSL_CONFIG_GET" |
| 53 | -echo -e " Include System i/f configuration: $INCLUDE_DSL_SYSTEM_INTERFACE" |
| 54 | -echo -e " Include Resource Statistics: $INCLUDE_DSL_RESOURCE_STATISTICS" |
| 55 | -echo -e " Include Framing Parameters: $INCLUDE_DSL_FRAMING_PARAMETERS" |
| 56 | -echo -e " Include G997 Line Inventory: $INCLUDE_DSL_G997_LINE_INVENTORY" |
| 57 | -echo -e " Include G997 Framing Parameters: $INCLUDE_DSL_G997_FRAMING_PARAMETERS" |
| 58 | -echo -e " Include G997 per tone data: $INCLUDE_DSL_G997_PER_TONE" |
| 59 | -echo -e " Include G997 status: $INCLUDE_DSL_G997_STATUS" |
| 60 | -echo -e " Include G997 alarm: $INCLUDE_DSL_G997_ALARM" |
| 61 | -echo -e " Include DSL Bonding: $INCLUDE_DSL_BONDING" |
| 62 | -echo -e " Include Misc Line Status $INCLUDE_DSL_CPE_MISC_LINE_STATUS" |
| 63 | -echo -e " Include DELT: $INCLUDE_DSL_DELT" |
| 64 | -echo -e " Include DELT data static storage: $DSL_CPE_STATIC_DELT_DATA" |
| 65 | -echo -e " Include PM: $INCLUDE_DSL_PM" |
| 66 | -echo -e " Include PM config: $INCLUDE_DSL_CPE_PM_CONFIG" |
| 67 | -echo -e " Include PM total: $INCLUDE_DSL_CPE_PM_TOTAL_COUNTERS" |
| 68 | -echo -e " Include PM history: $INCLUDE_DSL_CPE_PM_HISTORY" |
| 69 | -echo -e " Include PM showtime: $INCLUDE_DSL_CPE_PM_SHOWTIME_COUNTERS" |
| 70 | -echo -e " Include PM optional: $INCLUDE_DSL_CPE_PM_OPTIONAL_PARAMETERS" |
| 71 | -echo -e " Include PM line: $INCLUDE_DSL_CPE_PM_LINE_COUNTERS" |
| 72 | -echo -e " Include PM line event showtime: $INCLUDE_DSL_CPE_PM_LINE_EVENT_SHOWTIME_COUNTERS" |
| 73 | -echo -e " Include PM channel: $INCLUDE_DSL_CPE_PM_CHANNEL_COUNTERS" |
| 74 | -echo -e " Include PM channel extended: $INCLUDE_DSL_CPE_PM_CHANNEL_EXT_COUNTERS" |
| 75 | -echo -e " Include PM data path: $INCLUDE_DSL_CPE_PM_DATA_PATH_COUNTERS" |
| 76 | -echo -e " Include PM data path failure: $INCLUDE_DSL_CPE_PM_DATA_PATH_FAILURE_COUNTERS" |
| 77 | -echo -e " Include PM ReTx: $INCLUDE_DSL_CPE_PM_RETX_COUNTERS" |
| 78 | -echo -e " Include PM line threshold: $INCLUDE_DSL_CPE_PM_LINE_THRESHOLDS" |
| 79 | -echo -e " Include PM channel threshold: $INCLUDE_DSL_CPE_PM_CHANNEL_THRESHOLDS" |
| 80 | -echo -e " Include PM data path threshold: $INCLUDE_DSL_CPE_PM_DATA_PATH_THRESHOLDS" |
| 81 | -echo -e " Include PM ReTx threshold: $INCLUDE_DSL_CPE_PM_RETX_THRESHOLDS" |
| 82 | -echo -e " Include FW memory free support: $INCLUDE_DSL_FIRMWARE_MEMORY_FREE" |
| 83 | -echo -e "----------------------- deprectated ! ----------------------------------" |
| 84 | -echo -e " Include PM line failure: $INCLUDE_DSL_CPE_PM_LINE_FAILURE_COUNTERS" |
| 85 | -echo -e "" |
| 86 | -echo -e " Settings:" |
| 87 | -echo -e " Configure options: $CONFIGURE_OPTIONS" |
| 88 | -echo -e "------------------------------------------------------------------------" |
| 89 | +echo "------------------------------------------------------------------------" |
| 90 | +echo " Configuration for drv_dsl_cpe_api:" |
| 91 | +echo " Configure model type: $DSL_CONFIG_MODEL_TYPE" |
| 92 | +echo " Source code location: $srcdir" |
| 93 | +echo " Compiler: $CC" |
| 94 | +echo " Compiler c-flags: $CFLAGS" |
| 95 | +echo " Extra compiler c-flags: $EXTRA_DRV_CFLAGS" |
| 96 | +echo " Host System Type: $host" |
| 97 | +echo " Install path: $prefix" |
| 98 | +echo " Linux kernel include path: $KERNEL_INCL_PATH" |
| 99 | +echo " Linux kernel build path: $KERNEL_BUILD_PATH" |
| 100 | +echo " Linux kernel architecture: $KERNEL_ARCH" |
| 101 | +echo " Include IFXOS: $INCLUDE_DSL_CPE_API_IFXOS_SUPPORT" |
| 102 | +echo " IFXOS include path: $IFXOS_INCLUDE_PATH" |
| 103 | +echo " Driver Include Path $DSL_DRIVER_INCL_PATH" |
| 104 | +echo " DSL device: $DSL_DEVICE_NAME" |
| 105 | +echo " Max device number: $DSL_DRV_MAX_DEVICE_NUMBER" |
| 106 | +echo " Channels per line: $DSL_CHANNELS_PER_LINE" |
| 107 | +echo " Build lib (only for kernel 2.6) $DSL_CPE_API_LIBRARY_BUILD_2_6" |
| 108 | +echo " DSL data led flash frequency: $DSL_DATA_LED_FLASH_FREQUENCY Hz" |
| 109 | +echo " Disable debug prints: $DSL_DEBUG_DISABLE" |
| 110 | +echo " Preselection of max. debug level: $DSL_DBG_MAX_LEVEL_SET" |
| 111 | +echo " Preselected max. debug level: $DSL_DBG_MAX_LEVEL_PRE" |
| 112 | +echo " Include deprecated functions: $INCLUDE_DEPRECATED" |
| 113 | +echo " Include Device Exception Codes: $INCLUDE_DEVICE_EXCEPTION_CODES" |
| 114 | +echo " Include FW request support: $INCLUDE_FW_REQUEST_SUPPORT" |
| 115 | +echo " Include ADSL trace buffer: $INCLUDE_DSL_CPE_TRACE_BUFFER" |
| 116 | +echo " Include ADSL MIB: $INCLUDE_DSL_ADSL_MIB" |
| 117 | +echo " Include ADSL LED: $INCLUDE_ADSL_LED" |
| 118 | +echo " Include CEOC: $INCLUDE_DSL_CEOC" |
| 119 | +echo " Include config get support: $INCLUDE_DSL_CONFIG_GET" |
| 120 | +echo " Include System i/f configuration: $INCLUDE_DSL_SYSTEM_INTERFACE" |
| 121 | +echo " Include Resource Statistics: $INCLUDE_DSL_RESOURCE_STATISTICS" |
| 122 | +echo " Include Framing Parameters: $INCLUDE_DSL_FRAMING_PARAMETERS" |
| 123 | +echo " Include G997 Line Inventory: $INCLUDE_DSL_G997_LINE_INVENTORY" |
| 124 | +echo " Include G997 Framing Parameters: $INCLUDE_DSL_G997_FRAMING_PARAMETERS" |
| 125 | +echo " Include G997 per tone data: $INCLUDE_DSL_G997_PER_TONE" |
| 126 | +echo " Include G997 status: $INCLUDE_DSL_G997_STATUS" |
| 127 | +echo " Include G997 alarm: $INCLUDE_DSL_G997_ALARM" |
| 128 | +echo " Include DSL Bonding: $INCLUDE_DSL_BONDING" |
| 129 | +echo " Include Misc Line Status $INCLUDE_DSL_CPE_MISC_LINE_STATUS" |
| 130 | +echo " Include DELT: $INCLUDE_DSL_DELT" |
| 131 | +echo " Include DELT data static storage: $DSL_CPE_STATIC_DELT_DATA" |
| 132 | +echo " Include PM: $INCLUDE_DSL_PM" |
| 133 | +echo " Include PM config: $INCLUDE_DSL_CPE_PM_CONFIG" |
| 134 | +echo " Include PM total: $INCLUDE_DSL_CPE_PM_TOTAL_COUNTERS" |
| 135 | +echo " Include PM history: $INCLUDE_DSL_CPE_PM_HISTORY" |
| 136 | +echo " Include PM showtime: $INCLUDE_DSL_CPE_PM_SHOWTIME_COUNTERS" |
| 137 | +echo " Include PM optional: $INCLUDE_DSL_CPE_PM_OPTIONAL_PARAMETERS" |
| 138 | +echo " Include PM line: $INCLUDE_DSL_CPE_PM_LINE_COUNTERS" |
| 139 | +echo " Include PM line event showtime: $INCLUDE_DSL_CPE_PM_LINE_EVENT_SHOWTIME_COUNTERS" |
| 140 | +echo " Include PM channel: $INCLUDE_DSL_CPE_PM_CHANNEL_COUNTERS" |
| 141 | +echo " Include PM channel extended: $INCLUDE_DSL_CPE_PM_CHANNEL_EXT_COUNTERS" |
| 142 | +echo " Include PM data path: $INCLUDE_DSL_CPE_PM_DATA_PATH_COUNTERS" |
| 143 | +echo " Include PM data path failure: $INCLUDE_DSL_CPE_PM_DATA_PATH_FAILURE_COUNTERS" |
| 144 | +echo " Include PM ReTx: $INCLUDE_DSL_CPE_PM_RETX_COUNTERS" |
| 145 | +echo " Include PM line threshold: $INCLUDE_DSL_CPE_PM_LINE_THRESHOLDS" |
| 146 | +echo " Include PM channel threshold: $INCLUDE_DSL_CPE_PM_CHANNEL_THRESHOLDS" |
| 147 | +echo " Include PM data path threshold: $INCLUDE_DSL_CPE_PM_DATA_PATH_THRESHOLDS" |
| 148 | +echo " Include PM ReTx threshold: $INCLUDE_DSL_CPE_PM_RETX_THRESHOLDS" |
| 149 | +echo " Include FW memory free support: $INCLUDE_DSL_FIRMWARE_MEMORY_FREE" |
| 150 | +echo "----------------------- deprectated ! ----------------------------------" |
| 151 | +echo " Include PM line failure: $INCLUDE_DSL_CPE_PM_LINE_FAILURE_COUNTERS" |
| 152 | +echo "" |
| 153 | +echo " Settings:" |
| 154 | +echo " Configure options: $CONFIGURE_OPTIONS" |
| 155 | +echo "------------------------------------------------------------------------" |
| 156 | ]) |
| 157 | |
| 158 | AC_CONFIG_FILES([Makefile src/Makefile]) |
| 159 | --- a/src/Makefile.am |
| 160 | +++ b/src/Makefile.am |
| 161 | @@ -303,7 +303,7 @@ if KERNEL_2_6 |
| 162 | drv_dsl_cpe_api_OBJS = "$(subst .c,.o,$(filter %.c,$(drv_dsl_cpe_api_SOURCES)))" |
| 163 | |
| 164 | drv_dsl_cpe_api.ko: $(drv_dsl_cpe_api_SOURCES) |
| 165 | - @echo -e "drv_dsl_cpe_api: Making Linux 2.6.x kernel object" |
| 166 | + @echo "drv_dsl_cpe_api: Making Linux 2.6.x kernel object" |
| 167 | if test ! -e common/drv_dsl_cpe_api.c ; then \ |
| 168 | echo "copy source files (as links only!)"; \ |
| 169 | for f in $(filter %.c,$(drv_dsl_cpe_api_SOURCES)); do \ |
| 170 | @@ -311,10 +311,10 @@ drv_dsl_cpe_api.ko: $(drv_dsl_cpe_api_SO |
| 171 | cp -s $(addprefix @abs_srcdir@/,$$f) $(PWD)/`dirname $$f`/ ; \ |
| 172 | done \ |
| 173 | fi |
| 174 | - @echo -e "# drv_dsl_cpe_api: Generated to build Linux 2.6.x kernel object" > $(PWD)/Kbuild |
| 175 | - @echo -e "obj-m := $(subst .ko,.o,$@)" >> $(PWD)/Kbuild |
| 176 | - @echo -e "$(subst .ko,,$@)-y := $(drv_dsl_cpe_api_OBJS)" >> $(PWD)/Kbuild |
| 177 | - @echo -e "EXTRA_CFLAGS := $(CFLAGS) -DHAVE_CONFIG_H $(drv_dsl_cpe_api_CFLAGS) $(DSL_DRIVER_INCL_PATH) $(IFXOS_INCLUDE_PATH) -I@abs_srcdir@/include -I$(PWD)/include" >> $(PWD)/Kbuild |
| 178 | + @echo "# drv_dsl_cpe_api: Generated to build Linux 2.6.x kernel object" > $(PWD)/Kbuild |
| 179 | + @echo "obj-m := $(subst .ko,.o,$@)" >> $(PWD)/Kbuild |
| 180 | + @echo "$(subst .ko,,$@)-y := $(drv_dsl_cpe_api_OBJS)" >> $(PWD)/Kbuild |
| 181 | + @echo "EXTRA_CFLAGS := $(CFLAGS) -DHAVE_CONFIG_H $(drv_dsl_cpe_api_CFLAGS) $(DSL_DRIVER_INCL_PATH) $(IFXOS_INCLUDE_PATH) -I@abs_srcdir@/include -I$(PWD)/include" >> $(PWD)/Kbuild |
| 182 | $(MAKE) ARCH=@KERNEL_ARCH@ -C @KERNEL_BUILD_PATH@ O=@KERNEL_BUILD_PATH@ M=$(PWD) modules |
| 183 | |
| 184 | clean-generic: |
| 185 | |
