| 1 | /* |
| 2 | * ADM5120 PCI Host Controller driver |
| 3 | * |
| 4 | * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> |
| 5 | * |
| 6 | * This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel |
| 7 | * done by Jeroen Vreeken |
| 8 | * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) |
| 9 | * |
| 10 | * Jeroen's code was based on the Linux 2.4.xx source codes found in various |
| 11 | * tarballs released by Edimax for it's ADM5120 based devices |
| 12 | * Copyright (C) ADMtek Incorporated |
| 13 | * |
| 14 | * This program is free software; you can redistribute it and/or modify it |
| 15 | * under the terms of the GNU General Public License version 2 as published |
| 16 | * by the Free Software Foundation. |
| 17 | * |
| 18 | */ |
| 19 | #include <linux/types.h> |
| 20 | #include <linux/kernel.h> |
| 21 | #include <linux/init.h> |
| 22 | #include <linux/spinlock.h> |
| 23 | #include <linux/io.h> |
| 24 | |
| 25 | #include <linux/pci.h> |
| 26 | #include <linux/pci_ids.h> |
| 27 | #include <linux/pci_regs.h> |
| 28 | |
| 29 | #include <asm/delay.h> |
| 30 | #include <asm/bootinfo.h> |
| 31 | |
| 32 | #include <asm/mach-adm5120/adm5120_defs.h> |
| 33 | #include <asm/mach-adm5120/adm5120_info.h> |
| 34 | #include <asm/mach-adm5120/adm5120_defs.h> |
| 35 | #include <asm/mach-adm5120/adm5120_platform.h> |
| 36 | |
| 37 | #undef DEBUG |
| 38 | |
| 39 | #ifdef DEBUG |
| 40 | #define DBG(f, a...) printk(KERN_DEBUG f, ## a) |
| 41 | #else |
| 42 | #define DBG(f, a...) do {} while (0) |
| 43 | #endif |
| 44 | |
| 45 | #define PCI_ENABLE 0x80000000 |
| 46 | |
| 47 | /* -------------------------------------------------------------------------*/ |
| 48 | |
| 49 | static unsigned int adm5120_pci_nr_irqs __initdata; |
| 50 | static struct adm5120_pci_irq *adm5120_pci_irq_map __initdata; |
| 51 | |
| 52 | static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED; |
| 53 | |
| 54 | /* -------------------------------------------------------------------------*/ |
| 55 | |
| 56 | static inline void write_cfgaddr(u32 addr) |
| 57 | { |
| 58 | __raw_writel((addr | PCI_ENABLE), |
| 59 | (void __iomem *)(KSEG1ADDR(ADM5120_PCICFG_ADDR))); |
| 60 | } |
| 61 | |
| 62 | static inline void write_cfgdata(u32 data) |
| 63 | { |
| 64 | __raw_writel(data, (void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA)); |
| 65 | } |
| 66 | |
| 67 | static inline u32 read_cfgdata(void) |
| 68 | { |
| 69 | return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA)); |
| 70 | } |
| 71 | |
| 72 | static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where) |
| 73 | { |
| 74 | return (((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \ |
| 75 | (where & 0xFC)); |
| 76 | } |
| 77 | |
| 78 | /* -------------------------------------------------------------------------*/ |
| 79 | |
| 80 | static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, |
| 81 | int size, u32 *val) |
| 82 | { |
| 83 | unsigned long flags; |
| 84 | u32 data; |
| 85 | |
| 86 | spin_lock_irqsave(&pci_lock, flags); |
| 87 | |
| 88 | write_cfgaddr(mkaddr(bus, devfn, where)); |
| 89 | data = read_cfgdata(); |
| 90 | |
| 91 | DBG("PCI: cfg_read %02u.%02u.%01u/%02X:%01d, cfg:0x%08X", |
| 92 | bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), |
| 93 | where, size, data); |
| 94 | |
| 95 | switch (size) { |
| 96 | case 1: |
| 97 | if (where & 1) |
| 98 | data >>= 8; |
| 99 | if (where & 2) |
| 100 | data >>= 16; |
| 101 | data &= 0xFF; |
| 102 | break; |
| 103 | case 2: |
| 104 | if (where & 2) |
| 105 | data >>= 16; |
| 106 | data &= 0xFFFF; |
| 107 | break; |
| 108 | } |
| 109 | |
| 110 | *val = data; |
| 111 | DBG(", 0x%08X returned\n", data); |
| 112 | |
| 113 | spin_unlock_irqrestore(&pci_lock, flags); |
| 114 | |
| 115 | return PCIBIOS_SUCCESSFUL; |
| 116 | } |
| 117 | |
| 118 | static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, |
| 119 | int size, u32 val) |
| 120 | { |
| 121 | unsigned long flags; |
| 122 | u32 data; |
| 123 | int s; |
| 124 | |
| 125 | spin_lock_irqsave(&pci_lock, flags); |
| 126 | |
| 127 | write_cfgaddr(mkaddr(bus, devfn, where)); |
| 128 | data = read_cfgdata(); |
| 129 | |
| 130 | DBG("PCI: cfg_write %02u.%02u.%01u/%02X:%01d, cfg:0x%08X", |
| 131 | bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), |
| 132 | where, size, data); |
| 133 | |
| 134 | switch (size) { |
| 135 | case 1: |
| 136 | s = ((where & 3) << 3); |
| 137 | data &= ~(0xFF << s); |
| 138 | data |= ((val & 0xFF) << s); |
| 139 | break; |
| 140 | case 2: |
| 141 | s = ((where & 2) << 4); |
| 142 | data &= ~(0xFFFF << s); |
| 143 | data |= ((val & 0xFFFF) << s); |
| 144 | break; |
| 145 | case 4: |
| 146 | data = val; |
| 147 | break; |
| 148 | } |
| 149 | |
| 150 | write_cfgdata(data); |
| 151 | DBG(", 0x%08X written\n", data); |
| 152 | |
| 153 | spin_unlock_irqrestore(&pci_lock, flags); |
| 154 | |
| 155 | return PCIBIOS_SUCCESSFUL; |
| 156 | } |
| 157 | |
| 158 | struct pci_ops adm5120_pci_ops = { |
| 159 | .read = pci_config_read, |
| 160 | .write = pci_config_write, |
| 161 | }; |
| 162 | |
| 163 | /* -------------------------------------------------------------------------*/ |
| 164 | |
| 165 | static void adm5120_pci_fixup(struct pci_dev *dev) |
| 166 | { |
| 167 | if (dev->devfn != 0) |
| 168 | return; |
| 169 | |
| 170 | /* setup COMMAND register */ |
| 171 | pci_write_config_word(dev, PCI_COMMAND, |
| 172 | (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER)); |
| 173 | |
| 174 | /* setup CACHE_LINE_SIZE register */ |
| 175 | pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4); |
| 176 | |
| 177 | /* setup BARS */ |
| 178 | pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0); |
| 179 | pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0); |
| 180 | } |
| 181 | |
| 182 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120, |
| 183 | adm5120_pci_fixup); |
| 184 | |
| 185 | /* -------------------------------------------------------------------------*/ |
| 186 | |
| 187 | void __init adm5120_pci_set_irq_map(unsigned int nr_irqs, |
| 188 | struct adm5120_pci_irq *map) |
| 189 | { |
| 190 | adm5120_pci_nr_irqs = nr_irqs; |
| 191 | adm5120_pci_irq_map = map; |
| 192 | } |
| 193 | |
| 194 | int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| 195 | { |
| 196 | int irq = -1; |
| 197 | int i; |
| 198 | |
| 199 | if ((!adm5120_pci_nr_irqs) || (!adm5120_pci_irq_map)) { |
| 200 | printk(KERN_ALERT "PCI: pci_irq_map is not initialized\n"); |
| 201 | goto out; |
| 202 | } |
| 203 | |
| 204 | if (slot < 1 || slot > 3) { |
| 205 | printk(KERN_ALERT "PCI: slot number %u is not supported\n", |
| 206 | slot); |
| 207 | goto out; |
| 208 | } |
| 209 | |
| 210 | for (i = 0; i < adm5120_pci_nr_irqs; i++) { |
| 211 | if ((adm5120_pci_irq_map[i].slot == slot) |
| 212 | && (adm5120_pci_irq_map[i].func == PCI_FUNC(dev->devfn)) |
| 213 | && (adm5120_pci_irq_map[i].pin == pin)) { |
| 214 | irq = adm5120_pci_irq_map[i].irq; |
| 215 | break; |
| 216 | } |
| 217 | } |
| 218 | |
| 219 | if (irq < 0) { |
| 220 | printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n", |
| 221 | pci_name((struct pci_dev *)dev), pin); |
| 222 | } else { |
| 223 | printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n", |
| 224 | pci_name((struct pci_dev *)dev), pin, irq); |
| 225 | } |
| 226 | |
| 227 | out: |
| 228 | return irq; |
| 229 | } |
| 230 | |
| 231 | int pcibios_plat_dev_init(struct pci_dev *dev) |
| 232 | { |
| 233 | return 0; |
| 234 | } |
| 235 | |
| 236 | /* -------------------------------------------------------------------------*/ |
| 237 | |
| 238 | static struct resource pci_io_resource = { |
| 239 | .name = "ADM5120 PCI I/O", |
| 240 | .start = ADM5120_PCIIO_BASE, |
| 241 | .end = ADM5120_PCICFG_ADDR-1, |
| 242 | .flags = IORESOURCE_IO |
| 243 | }; |
| 244 | |
| 245 | static struct resource pci_mem_resource = { |
| 246 | .name = "ADM5120 PCI MEM", |
| 247 | .start = ADM5120_PCIMEM_BASE, |
| 248 | .end = ADM5120_PCIIO_BASE-1, |
| 249 | .flags = IORESOURCE_MEM |
| 250 | }; |
| 251 | |
| 252 | static struct pci_controller adm5120_controller = { |
| 253 | .pci_ops = &adm5120_pci_ops, |
| 254 | .io_resource = &pci_io_resource, |
| 255 | .mem_resource = &pci_mem_resource, |
| 256 | }; |
| 257 | |
| 258 | static int __init adm5120_pci_setup(void) |
| 259 | { |
| 260 | if (adm5120_package_pqfp()) { |
| 261 | printk(KERN_INFO "PCI: not available on ADM5120P\n"); |
| 262 | return -1; |
| 263 | } |
| 264 | |
| 265 | /* Avoid ISA compat ranges. */ |
| 266 | PCIBIOS_MIN_IO = 0x00000000; |
| 267 | PCIBIOS_MIN_MEM = 0x00000000; |
| 268 | |
| 269 | /* Set I/O resource limits. */ |
| 270 | ioport_resource.end = 0x1fffffff; |
| 271 | iomem_resource.end = 0xffffffff; |
| 272 | |
| 273 | register_pci_controller(&adm5120_controller); |
| 274 | return 0; |
| 275 | } |
| 276 | |
| 277 | arch_initcall(adm5120_pci_setup); |
| 278 | |