Root/
| File | Age | Message | Size | |
|---|---|---|---|---|
| .. | ||||
![]() |
Kconfig | 13 years 2 months | nbd: ar71xx: merge ap91_eth removal from r23439 | 5.64 kB |
![]() |
Makefile | 13 years 2 months | nbd: ar71xx: merge ap91_eth removal from r23439 | 2.40 kB |
![]() |
ar71xx.c | 13 years 9 months | nbd: ar71xx: add support for ar7241 and ar7242 | 4.00 kB |
![]() |
dev-ap91-pci.c | 12 years 11 months | juhosg: backfire: ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards (backport of r24568) | 2.94 kB |
![]() |
dev-ap91-pci.h | 12 years 11 months | juhosg: backfire: ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards (backport of r24568) | 817 bytes |
![]() |
dev-ap94-pci.c | 12 years 11 months | juhosg: backfire: ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards (backport of r24649, r24651) | 4.25 kB |
![]() |
dev-ap94-pci.h | 12 years 11 months | juhosg: backfire: ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards (backport of r24649, r24651) | 968 bytes |
![]() |
dev-ar913x-wmac.c | 12 years 11 months | juhosg: backfire: ar71xx: improve the wndr3700 quirks (backport of r23822, r23875) | 1.75 kB |
![]() |
dev-ar913x-wmac.h | 13 years 11 months | juhosg: ar71xx: pass eeprom and mac address location to the ar913x_add_device_wmac function | 603 bytes |
![]() |
dev-dsa.c | 14 years 1 day | juhosg: ar71xx: move dsa switch device support into a separate file | 1.11 kB |
![]() |
dev-dsa.h | 14 years 1 day | juhosg: ar71xx: move dsa switch device support into a separate file | 558 bytes |
![]() |
dev-gpio-buttons.c | 14 years 1 day | juhosg: ar71xx: move gpio-buttons support into a spearate file | 1.28 kB |
![]() |
dev-gpio-buttons.h | 14 years 1 day | juhosg: ar71xx: move gpio-buttons support into a spearate file | 715 bytes |
![]() |
dev-leds-gpio.c | 14 years 1 day | juhosg: ar71xx: move leds-gpio device support into a spearate file | 1.22 kB |
![]() |
dev-leds-gpio.h | 14 years 1 day | juhosg: ar71xx: move leds-gpio device support into a spearate file | 591 bytes |
![]() |
dev-m25p80.c | 14 years 9 days | juhosg: ar71xx: add common m25p80 device | 737 bytes |
![]() |
dev-m25p80.h | 14 years 9 days | juhosg: ar71xx: add common m25p80 device | 454 bytes |
![]() |
dev-pb42-pci.c | 14 years 2 days | juhosg: ar71xx: move PB42 specific PCI init code into a separate file | 894 bytes |
![]() |
dev-pb42-pci.h | 14 years 2 days | juhosg: ar71xx: move PB42 specific PCI init code into a separate file | 600 bytes |
![]() |
dev-pb9x-pci.c | 13 years 9 months | nbd: ar71xx: add basic kernel support for pb92 | 827 bytes |
![]() |
dev-pb9x-pci.h | 13 years 9 months | nbd: ar71xx: add basic kernel support for pb92 | 655 bytes |
![]() |
dev-usb.c | 13 years 9 months | nbd: ar71xx: add support for ar7241 and ar7242 | 4.45 kB |
![]() |
dev-usb.h | 14 years 1 day | juhosg: ar71xx: move USB host device support into a separate file | 488 bytes |
![]() |
devices.c | 13 years 8 months | nbd: ar71xx: reset the mdio bus on ar7241/ar7242 | 12.82 kB |
![]() |
devices.h | 14 years 1 day | juhosg: ar71xx: move dsa switch device support into a separate file | 1.38 kB |
![]() |
early_printk.c | 14 years 4 months | juhosg: [ar71xx] move early_printk stuff into a separate file | 853 bytes |
![]() |
gpio.c | 13 years 9 months | nbd: ar71xx: add support for ar7241 and ar7242 | 4.37 kB |
![]() |
irq.c | 13 years 8 months | nbd: ar71xx: fix a wifi card stability issue | 7.04 kB |
![]() |
mach-ap81.c | 13 years 9 months | juhosg: ar71xx: change PHY select logic, and update phy_masks | 3.15 kB |
![]() |
mach-ap83.c | 13 years 9 months | juhosg: ar71xx: change PHY select logic, and update phy_masks | 6.03 kB |
![]() |
mach-aw-nr580.c | 13 years 9 months | juhosg: ar71xx: change PHY select logic, and update phy_masks | 2.44 kB |
![]() |
mach-dir-600-a1.c | 12 years 8 months | nbd: ar71xx: sync ethernet driver changes with trunk to fix MDIO issues on ar7240 | 3.70 kB |
![]() |
mach-dir-615-c1.c | 13 years 8 months | juhosg: backfire: ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards (backport of r20752) | 4.52 kB |
![]() |
mach-dir-825-b1.c | 12 years 10 months | juhosg: backfire: ar71xx: add rtl8366s initvals for the DIR-825 board (backport of r25121) | 5.15 kB |
![]() |
mach-mzk-w04nu.c | 13 years 7 months | juhosg: backfire: ar71xx: fix firmware partition size on the MZK-W04NU board (backport of r21172) | 3.91 kB |
![]() |
mach-mzk-w300nh.c | 13 years 7 months | juhosg: backfire: ar71xx: remove config partition from the mtd map on the MZK-W300NH board (backport of r21173) | 3.85 kB |
![]() |
mach-pb42.c | 13 years 9 months | juhosg: ar71xx: change PHY select logic, and update phy_masks | 1.75 kB |
![]() |
mach-pb44.c | 13 years 9 months | juhosg: ar71xx: change PHY select logic, and update phy_masks | 5.08 kB |
![]() |
mach-pb92.c | 13 years 8 months | nbd: ar71xx: fix the wan port on pb92 | 2.52 kB |
![]() |
mach-rb4xx.c | 13 years 8 months | jow: [backfire] merge r20722 | 6.50 kB |
![]() |
mach-rb750.c | 12 years 8 months | nbd: ar71xx: sync ethernet driver changes with trunk to fix MDIO issues on ar7240 | 3.50 kB |
![]() |
mach-tew-632brp.c | 13 years 8 months | juhosg: backfire: ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards (backport of r20752) | 3.69 kB |
![]() |
mach-tl-wr1043nd.c | 13 years 9 months | juhosg: ar71xx: change PHY select logic, and update phy_masks | 3.86 kB |
![]() |
mach-tl-wr741nd.c | 12 years 8 months | nbd: ar71xx: sync ethernet driver changes with trunk to fix MDIO issues on ar7240 | 3.17 kB |
![]() |
mach-tl-wr841n.c | 13 years 9 months | juhosg: ar71xx: change PHY select logic, and update phy_masks | 3.39 kB |
![]() |
mach-tl-wr941nd.c | 12 years 11 months | juhosg: backfire: ar71xx: add wlan led for the TL-WR941ND (backport of r24612) | 3.52 kB |
![]() |
mach-ubnt.c | 13 years 8 months | jow: [backfire] merge r20722 | 7.00 kB |
![]() |
mach-wndr3700.c | 12 years 9 months | juhosg: backfire: ar71xx: add support for the WNDR3700v2 board (backport of r25118) | 7.04 kB |
![]() |
mach-wnr2000.c | 13 years 9 months | juhosg: ar71xx: change PHY select logic, and update phy_masks | 3.48 kB |
![]() |
mach-wp543.c | 13 years 9 months | juhosg: ar71xx: change PHY select logic, and update phy_masks | 2.29 kB |
![]() |
mach-wrt160nl.c | 13 years 11 months | juhosg: ar71xx: reduce button threshold values | 3.72 kB |
![]() |
mach-wrt400n.c | 13 years 9 months | agb: [ar71xx] wrt400n: lan ports don't need the ar8216 workaround | 3.90 kB |
![]() |
mach-wzr-hp-g300nh.c | 13 years 9 months | juhosg: ar71xx: change PHY select logic, and update phy_masks | 7.03 kB |
![]() |
machtype.h | 12 years 9 months | juhosg: backfire: ar71xx: add support for the WNDR3700v2 board (backport of r25118) | 2.48 kB |
![]() |
nvram.c | 13 years 11 months | juhosg: ar71xx: fix random wireless mac address on the TEW-632BRP/DIR-615 boards | 1.48 kB |
![]() |
nvram.h | 13 years 11 months | juhosg: ar71xx: fix random wireless mac address on the TEW-632BRP/DIR-615 boards | 574 bytes |
![]() |
pci.c | 13 years 9 months | nbd: ar71xx: add support for ar7241 and ar7242 | 1.92 kB |
![]() |
prom.c | 13 years 9 months | juhosg: ar71xx: use COMMAND_LINE_SIZE | 3.57 kB |
![]() |
setup.c | 13 years 9 months | nbd: ar71xx: add support for ar7241 and ar7242 | 6.84 kB |
Download this version or git clone git://projects.qi-hardware.com/openwrt-xburst.git 
