| 1 | diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c |
| 2 | index 45b61c9..17140ac 100644 |
| 3 | --- a/arch/mips/alchemy/mtx-1/board_setup.c |
| 4 | +++ b/arch/mips/alchemy/mtx-1/board_setup.c |
| 5 | @@ -56,8 +56,6 @@ void __init board_setup(void) |
| 6 | } |
| 7 | #endif |
| 8 | |
| 9 | - alchemy_gpio2_enable(); |
| 10 | - |
| 11 | #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) |
| 12 | /* Enable USB power switch */ |
| 13 | alchemy_gpio_direction_output(204, 0); |
| 14 | @@ -92,20 +90,12 @@ void __init board_setup(void) |
| 15 | int |
| 16 | mtx1_pci_idsel(unsigned int devsel, int assert) |
| 17 | { |
| 18 | -#define MTX_IDSEL_ONLY_0_AND_3 0 |
| 19 | -#if MTX_IDSEL_ONLY_0_AND_3 |
| 20 | - if (devsel != 0 && devsel != 3) { |
| 21 | - printk(KERN_ERR "*** not 0 or 3\n"); |
| 22 | - return 0; |
| 23 | - } |
| 24 | -#endif |
| 25 | - |
| 26 | if (assert && devsel != 0) |
| 27 | /* Suppress signal to Cardbus */ |
| 28 | gpio_set_value(1, 0); /* set EXT_IO3 OFF */ |
| 29 | else |
| 30 | gpio_set_value(1, 1); /* set EXT_IO3 ON */ |
| 31 | |
| 32 | - au_sync_udelay(1); |
| 33 | + udelay(1); |
| 34 | return 1; |
| 35 | } |
| 36 | |
