| 1 | --- a/arch/mips/Kconfig |
| 2 | +++ b/arch/mips/Kconfig |
| 3 | @@ -74,6 +74,7 @@ config BCM47XX |
| 4 | select SSB_DRIVER_MIPS |
| 5 | select SSB_DRIVER_EXTIF |
| 6 | select SSB_EMBEDDED |
| 7 | + select SSB_B43_PCI_BRIDGE if PCI |
| 8 | select SSB_PCICORE_HOSTMODE if PCI |
| 9 | select GENERIC_GPIO |
| 10 | select SYS_HAS_EARLY_PRINTK |
| 11 | --- a/arch/mips/bcm47xx/Makefile |
| 12 | +++ b/arch/mips/bcm47xx/Makefile |
| 13 | @@ -3,4 +3,4 @@ |
| 14 | # under Linux. |
| 15 | # |
| 16 | |
| 17 | -obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o |
| 18 | +obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o |
| 19 | --- a/arch/mips/bcm47xx/irq.c |
| 20 | +++ b/arch/mips/bcm47xx/irq.c |
| 21 | @@ -1,5 +1,6 @@ |
| 22 | /* |
| 23 | * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org> |
| 24 | + * Copyright (C) 2008 Michael Buesch <mb@bu3sch.de> |
| 25 | * |
| 26 | * This program is free software; you can redistribute it and/or modify it |
| 27 | * under the terms of the GNU General Public License as published by the |
| 28 | @@ -23,10 +24,19 @@ |
| 29 | */ |
| 30 | |
| 31 | #include <linux/types.h> |
| 32 | +#include <linux/errno.h> |
| 33 | +#include <linux/init.h> |
| 34 | #include <linux/interrupt.h> |
| 35 | #include <linux/irq.h> |
| 36 | +#include <linux/pci.h> |
| 37 | +#include <linux/ssb/ssb.h> |
| 38 | + |
| 39 | #include <asm/irq_cpu.h> |
| 40 | |
| 41 | + |
| 42 | +extern struct ssb_bus ssb_bcm47xx; |
| 43 | + |
| 44 | + |
| 45 | void plat_irq_dispatch(void) |
| 46 | { |
| 47 | u32 cause; |
| 48 | --- a/arch/mips/bcm47xx/nvram.c |
| 49 | +++ b/arch/mips/bcm47xx/nvram.c |
| 50 | @@ -24,10 +24,10 @@ |
| 51 | #include <asm/io.h> |
| 52 | #include <asm/uaccess.h> |
| 53 | |
| 54 | -#include <nvram.h> |
| 55 | +#include "include/nvram.h" |
| 56 | |
| 57 | #define MB * 1048576 |
| 58 | -extern struct ssb_bus ssb; |
| 59 | +extern struct ssb_bus ssb_bcm47xx; |
| 60 | |
| 61 | static char nvram_buf[NVRAM_SPACE]; |
| 62 | static int cfe_env; |
| 63 | @@ -36,7 +36,7 @@ extern char *cfe_env_get(char *nv_buf, c |
| 64 | /* Probe for NVRAM header */ |
| 65 | static void __init early_nvram_init(void) |
| 66 | { |
| 67 | - struct ssb_mipscore *mcore = &ssb.mipscore; |
| 68 | + struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore; |
| 69 | struct nvram_header *header; |
| 70 | int i; |
| 71 | u32 base, lim, off; |
| 72 | --- a/arch/mips/bcm47xx/setup.c |
| 73 | +++ b/arch/mips/bcm47xx/setup.c |
| 74 | @@ -2,7 +2,7 @@ |
| 75 | * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org> |
| 76 | * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org> |
| 77 | * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> |
| 78 | - * Copyright (C) 2006 Michael Buesch <mb@bu3sch.de> |
| 79 | + * Copyright (C) 2006-2008 Michael Buesch <mb@bu3sch.de> |
| 80 | * |
| 81 | * This program is free software; you can redistribute it and/or modify it |
| 82 | * under the terms of the GNU General Public License as published by the |
| 83 | @@ -25,18 +25,28 @@ |
| 84 | * 675 Mass Ave, Cambridge, MA 02139, USA. |
| 85 | */ |
| 86 | |
| 87 | +#include <linux/init.h> |
| 88 | #include <linux/types.h> |
| 89 | #include <linux/ssb/ssb.h> |
| 90 | #include <linux/ssb/ssb_embedded.h> |
| 91 | +#include <linux/tty.h> |
| 92 | +#include <linux/serial.h> |
| 93 | +#include <linux/serial_core.h> |
| 94 | +#include <linux/serial_reg.h> |
| 95 | +#include <linux/serial_8250.h> |
| 96 | #include <asm/bootinfo.h> |
| 97 | #include <asm/reboot.h> |
| 98 | #include <asm/time.h> |
| 99 | -#include <bcm47xx.h> |
| 100 | #include <asm/fw/cfe/cfe_api.h> |
| 101 | +#include <linux/pm.h> |
| 102 | + |
| 103 | +#include "include/nvram.h" |
| 104 | |
| 105 | struct ssb_bus ssb_bcm47xx; |
| 106 | EXPORT_SYMBOL(ssb_bcm47xx); |
| 107 | |
| 108 | +extern void bcm47xx_pci_init(void); |
| 109 | + |
| 110 | static void bcm47xx_machine_restart(char *command) |
| 111 | { |
| 112 | printk(KERN_ALERT "Please stand by while rebooting the system...\n"); |
| 113 | @@ -56,7 +66,7 @@ static void bcm47xx_machine_halt(void) |
| 114 | cpu_relax(); |
| 115 | } |
| 116 | |
| 117 | -static void str2eaddr(char *str, char *dest) |
| 118 | +static void e_aton(char *str, char *dest) |
| 119 | { |
| 120 | int i = 0; |
| 121 | |
| 122 | @@ -73,52 +83,142 @@ static void str2eaddr(char *str, char *d |
| 123 | } |
| 124 | } |
| 125 | |
| 126 | -static int bcm47xx_get_invariants(struct ssb_bus *bus, |
| 127 | - struct ssb_init_invariants *iv) |
| 128 | +static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) |
| 129 | { |
| 130 | - char buf[100]; |
| 131 | + char *s; |
| 132 | |
| 133 | - /* Fill boardinfo structure */ |
| 134 | - memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo)); |
| 135 | + memset(sprom, 0xFF, sizeof(struct ssb_sprom)); |
| 136 | |
| 137 | - if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0) |
| 138 | - iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); |
| 139 | - if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0) |
| 140 | - iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); |
| 141 | - if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0) |
| 142 | - iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0); |
| 143 | - |
| 144 | - /* Fill sprom structure */ |
| 145 | - memset(&(iv->sprom), 0, sizeof(struct ssb_sprom)); |
| 146 | - iv->sprom.revision = 3; |
| 147 | - |
| 148 | - if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0) |
| 149 | - str2eaddr(buf, iv->sprom.et0mac); |
| 150 | - if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0) |
| 151 | - str2eaddr(buf, iv->sprom.et1mac); |
| 152 | - if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0) |
| 153 | - iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10); |
| 154 | - if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0) |
| 155 | - iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10); |
| 156 | - if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0) |
| 157 | - iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10); |
| 158 | - if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0) |
| 159 | - iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10); |
| 160 | + sprom->revision = 1; |
| 161 | + if ((s = nvram_get("il0macaddr"))) |
| 162 | + e_aton(s, sprom->il0mac); |
| 163 | + if ((s = nvram_get("et0macaddr"))) |
| 164 | + e_aton(s, sprom->et0mac); |
| 165 | + if ((s = nvram_get("et1macaddr"))) |
| 166 | + e_aton(s, sprom->et1mac); |
| 167 | + if ((s = nvram_get("et0phyaddr"))) |
| 168 | + sprom->et0phyaddr = simple_strtoul(s, NULL, 0); |
| 169 | + if ((s = nvram_get("et1phyaddr"))) |
| 170 | + sprom->et1phyaddr = simple_strtoul(s, NULL, 0); |
| 171 | + if ((s = nvram_get("et0mdcport"))) |
| 172 | + sprom->et0mdcport = !!simple_strtoul(s, NULL, 10); |
| 173 | + if ((s = nvram_get("et1mdcport"))) |
| 174 | + sprom->et1mdcport = !!simple_strtoul(s, NULL, 10); |
| 175 | + if ((s = nvram_get("pa0b0"))) |
| 176 | + sprom->pa0b0 = simple_strtoul(s, NULL, 0); |
| 177 | + if ((s = nvram_get("pa0b1"))) |
| 178 | + sprom->pa0b1 = simple_strtoul(s, NULL, 0); |
| 179 | + if ((s = nvram_get("pa0b2"))) |
| 180 | + sprom->pa0b2 = simple_strtoul(s, NULL, 0); |
| 181 | + if ((s = nvram_get("pa1b0"))) |
| 182 | + sprom->pa1b0 = simple_strtoul(s, NULL, 0); |
| 183 | + if ((s = nvram_get("pa1b1"))) |
| 184 | + sprom->pa1b1 = simple_strtoul(s, NULL, 0); |
| 185 | + if ((s = nvram_get("pa1b2"))) |
| 186 | + sprom->pa1b2 = simple_strtoul(s, NULL, 0); |
| 187 | + if ((s = nvram_get("wl0gpio0"))) |
| 188 | + sprom->gpio0 = simple_strtoul(s, NULL, 0); |
| 189 | + if ((s = nvram_get("wl0gpio1"))) |
| 190 | + sprom->gpio1 = simple_strtoul(s, NULL, 0); |
| 191 | + if ((s = nvram_get("wl0gpio2"))) |
| 192 | + sprom->gpio2 = simple_strtoul(s, NULL, 0); |
| 193 | + if ((s = nvram_get("wl0gpio3"))) |
| 194 | + sprom->gpio3 = simple_strtoul(s, NULL, 0); |
| 195 | + if ((s = nvram_get("pa0maxpwr"))) |
| 196 | + sprom->maxpwr_bg = simple_strtoul(s, NULL, 0); |
| 197 | + if ((s = nvram_get("pa1maxpwr"))) |
| 198 | + sprom->maxpwr_a = simple_strtoul(s, NULL, 0); |
| 199 | + if ((s = nvram_get("pa0itssit"))) |
| 200 | + sprom->itssi_bg = simple_strtoul(s, NULL, 0); |
| 201 | + if ((s = nvram_get("pa1itssit"))) |
| 202 | + sprom->itssi_a = simple_strtoul(s, NULL, 0); |
| 203 | + sprom->boardflags_lo = 0; |
| 204 | + if ((s = nvram_get("boardflags"))) |
| 205 | + sprom->boardflags_lo = simple_strtoul(s, NULL, 0); |
| 206 | + sprom->boardflags_hi = 0; |
| 207 | + if ((s = nvram_get("boardflags2"))) |
| 208 | + sprom->boardflags_hi = simple_strtoul(s, NULL, 0); |
| 209 | +} |
| 210 | + |
| 211 | +static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv) |
| 212 | +{ |
| 213 | + char *s; |
| 214 | + |
| 215 | + iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM; |
| 216 | + if ((s = nvram_get("boardtype"))) |
| 217 | + iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0); |
| 218 | + if ((s = nvram_get("boardrev"))) |
| 219 | + iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0); |
| 220 | + |
| 221 | + bcm47xx_fill_sprom(&iv->sprom); |
| 222 | + |
| 223 | + if ((s = nvram_get("cardbus"))) |
| 224 | + iv->has_cardbus_slot = !!simple_strtoul(s, NULL, 10); |
| 225 | |
| 226 | return 0; |
| 227 | } |
| 228 | |
| 229 | void __init plat_mem_setup(void) |
| 230 | { |
| 231 | - int err; |
| 232 | + int i, err; |
| 233 | + char *s; |
| 234 | + struct ssb_mipscore *mcore; |
| 235 | + |
| 236 | + err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants); |
| 237 | + if (err) { |
| 238 | + const char *msg = "Failed to initialize SSB bus (err %d)\n"; |
| 239 | + printk(msg, err); /* Make sure the message gets out of the box. */ |
| 240 | + panic(msg, err); |
| 241 | + } |
| 242 | + mcore = &ssb_bcm47xx.mipscore; |
| 243 | |
| 244 | - err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, |
| 245 | - bcm47xx_get_invariants); |
| 246 | - if (err) |
| 247 | - panic("Failed to initialize SSB bus (err %d)\n", err); |
| 248 | + s = nvram_get("kernel_args"); |
| 249 | + if (s && !strncmp(s, "console=ttyS1", 13)) { |
| 250 | + struct ssb_serial_port port; |
| 251 | + |
| 252 | + printk("Swapping serial ports!\n"); |
| 253 | + /* swap serial ports */ |
| 254 | + memcpy(&port, &mcore->serial_ports[0], sizeof(port)); |
| 255 | + memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port)); |
| 256 | + memcpy(&mcore->serial_ports[1], &port, sizeof(port)); |
| 257 | + } |
| 258 | + |
| 259 | + for (i = 0; i < mcore->nr_serial_ports; i++) { |
| 260 | + struct ssb_serial_port *port = &(mcore->serial_ports[i]); |
| 261 | + struct uart_port s; |
| 262 | + |
| 263 | + memset(&s, 0, sizeof(s)); |
| 264 | + s.line = i; |
| 265 | + s.mapbase = (unsigned int) port->regs; |
| 266 | + s.membase = port->regs; |
| 267 | + s.irq = port->irq + 2; |
| 268 | + s.uartclk = port->baud_base; |
| 269 | + s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; |
| 270 | + s.iotype = SERIAL_IO_MEM; |
| 271 | + s.regshift = port->reg_shift; |
| 272 | + |
| 273 | + early_serial_setup(&s); |
| 274 | + } |
| 275 | + printk("Serial init done.\n"); |
| 276 | |
| 277 | _machine_restart = bcm47xx_machine_restart; |
| 278 | _machine_halt = bcm47xx_machine_halt; |
| 279 | pm_power_off = bcm47xx_machine_halt; |
| 280 | } |
| 281 | |
| 282 | +static int __init bcm47xx_register_gpiodev(void) |
| 283 | +{ |
| 284 | + static struct resource res = { |
| 285 | + .start = 0xFFFFFFFF, |
| 286 | + }; |
| 287 | + struct platform_device *pdev; |
| 288 | + |
| 289 | + pdev = platform_device_register_simple("GPIODEV", 0, &res, 1); |
| 290 | + if (!pdev) { |
| 291 | + printk(KERN_ERR "bcm47xx: GPIODEV init failed\n"); |
| 292 | + return -ENODEV; |
| 293 | + } |
| 294 | + |
| 295 | + return 0; |
| 296 | +} |
| 297 | +device_initcall(bcm47xx_register_gpiodev); |
| 298 | --- a/arch/mips/bcm47xx/time.c |
| 299 | +++ b/arch/mips/bcm47xx/time.c |
| 300 | @@ -22,11 +22,17 @@ |
| 301 | * 675 Mass Ave, Cambridge, MA 02139, USA. |
| 302 | */ |
| 303 | |
| 304 | - |
| 305 | #include <linux/init.h> |
| 306 | +#include <linux/kernel.h> |
| 307 | +#include <linux/sched.h> |
| 308 | +#include <linux/serial_reg.h> |
| 309 | +#include <linux/interrupt.h> |
| 310 | #include <linux/ssb/ssb.h> |
| 311 | +#include <asm/addrspace.h> |
| 312 | +#include <asm/io.h> |
| 313 | #include <asm/time.h> |
| 314 | -#include <bcm47xx.h> |
| 315 | + |
| 316 | +extern struct ssb_bus ssb_bcm47xx; |
| 317 | |
| 318 | void __init plat_time_init(void) |
| 319 | { |
| 320 | |