| 1 | #!/bin/sh |
| 2 | # |
| 3 | # Copyright (C) 2010 OpenWrt.org |
| 4 | # |
| 5 | # This is free software, licensed under the GNU General Public License v2. |
| 6 | # See /LICENSE for more information. |
| 7 | # |
| 8 | |
| 9 | # |
| 10 | # This script sets system defaults for the hardware on firstboot |
| 11 | # |
| 12 | |
| 13 | local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo` |
| 14 | |
| 15 | wrt350nv2_default() { |
| 16 | # leds |
| 17 | uci batch <<__EOF |
| 18 | set system.power_led=led |
| 19 | set system.power_led.name='Power LED (green)' |
| 20 | set system.power_led.sysfs='wrt350nv2:green:power' |
| 21 | set system.power_led.default='1' |
| 22 | set system.wifi_led=led |
| 23 | set system.wifi_led.name='Wireless LED (green)' |
| 24 | set system.wifi_led.sysfs='wrt350nv2:green:wireless' |
| 25 | set system.wifi_led.trigger='netdev' |
| 26 | set system.wifi_led.dev='wlan0' |
| 27 | set system.wifi_led.mode='link tx rx' |
| 28 | set system.wifi_led.default='0' |
| 29 | commit system |
| 30 | __EOF |
| 31 | |
| 32 | # add mac address from U-Boot partition to lan and wan devices |
| 33 | MTD=`grep -e 'u-boot' /proc/mtd` |
| 34 | MTD=`echo ${MTD} | sed 's/[a-z]*\([0-9]*\):.*/\1/'` |
| 35 | [ -n "${MTD}" ] && { |
| 36 | MACADDR=`dd if=/dev/mtdblock${MTD} bs=1 skip=262048 count=6 2>/dev/null | hexdump -e '1/1 "%02x"'` |
| 37 | MACADDR2=$(( 0x${MACADDR} + 1)) |
| 38 | MACADDR2=`printf "%012x" ${MACADDR2}` |
| 39 | |
| 40 | MACADDR=`echo ${MACADDR} | sed 's/\(..\)/\1:/g' | sed 's/:$//'` |
| 41 | MACADDR2=`echo ${MACADDR2} | sed 's/\(..\)/\1:/g' | sed 's/:$//'` |
| 42 | |
| 43 | uci set network.eth0.macaddr=${MACADDR} |
| 44 | uci set network.lan.macaddr=${MACADDR} |
| 45 | uci set network.wan.macaddr=${MACADDR2} |
| 46 | uci commit network |
| 47 | } |
| 48 | } |
| 49 | |
| 50 | case "${hardware}" in |
| 51 | 'Linksys WRT350N v2') |
| 52 | wrt350nv2_default |
| 53 | ;; |
| 54 | esac |
| 55 | |
