| 1 | --- a/hostapd/config_file.c |
| 2 | +++ b/hostapd/config_file.c |
| 3 | @@ -1920,6 +1920,10 @@ struct hostapd_config * hostapd_config_r |
| 4 | "ht_capab", line); |
| 5 | errors++; |
| 6 | } |
| 7 | + } else if (os_strcmp(buf, "dynamic_ht40") == 0) { |
| 8 | + conf->dynamic_ht40 = atoi(pos); |
| 9 | + if (conf->dynamic_ht40 == 1) |
| 10 | + conf->dynamic_ht40 = 1500; |
| 11 | } else if (os_strcmp(buf, "require_ht") == 0) { |
| 12 | conf->require_ht = atoi(pos); |
| 13 | #endif /* CONFIG_IEEE80211N */ |
| 14 | --- a/src/ap/ap_config.h |
| 15 | +++ b/src/ap/ap_config.h |
| 16 | @@ -395,6 +395,7 @@ struct hostapd_config { |
| 17 | int ieee80211n; |
| 18 | int secondary_channel; |
| 19 | int require_ht; |
| 20 | + int dynamic_ht40; |
| 21 | }; |
| 22 | |
| 23 | |
| 24 | --- a/src/ap/hostapd.c |
| 25 | +++ b/src/ap/hostapd.c |
| 26 | @@ -27,6 +27,7 @@ |
| 27 | #include "beacon.h" |
| 28 | #include "iapp.h" |
| 29 | #include "ieee802_1x.h" |
| 30 | +#include "ieee802_11.h" |
| 31 | #include "ieee802_11_auth.h" |
| 32 | #include "vlan_init.h" |
| 33 | #include "wpa_auth.h" |
| 34 | @@ -285,6 +286,7 @@ static void hostapd_cleanup_iface_pre(st |
| 35 | */ |
| 36 | static void hostapd_cleanup_iface(struct hostapd_iface *iface) |
| 37 | { |
| 38 | + hostapd_deinit_ht(iface); |
| 39 | hostapd_free_hw_features(iface->hw_features, iface->num_hw_features); |
| 40 | iface->hw_features = NULL; |
| 41 | os_free(iface->current_rates); |
| 42 | --- a/src/ap/hostapd.h |
| 43 | +++ b/src/ap/hostapd.h |
| 44 | @@ -220,6 +220,9 @@ struct hostapd_iface { |
| 45 | /* Overlapping BSS information */ |
| 46 | int olbc_ht; |
| 47 | |
| 48 | + int force_20mhz; |
| 49 | + struct os_time last_20mhz_trigger; |
| 50 | + |
| 51 | u16 ht_op_mode; |
| 52 | void (*scan_cb)(struct hostapd_iface *iface); |
| 53 | |
| 54 | --- a/src/ap/ieee802_11.c |
| 55 | +++ b/src/ap/ieee802_11.c |
| 56 | @@ -1242,6 +1242,9 @@ static void handle_beacon(struct hostapd |
| 57 | sizeof(mgmt->u.beacon)), &elems, |
| 58 | 0); |
| 59 | |
| 60 | + if (!elems.ht_capabilities) |
| 61 | + hostapd_trigger_20mhz(hapd->iface); |
| 62 | + |
| 63 | ap_list_process_beacon(hapd->iface, mgmt, &elems, fi); |
| 64 | } |
| 65 | |
| 66 | --- a/src/ap/ieee802_11.h |
| 67 | +++ b/src/ap/ieee802_11.h |
| 68 | @@ -65,4 +65,17 @@ void hostapd_tx_status(struct hostapd_da |
| 69 | void ieee802_11_rx_from_unknown(struct hostapd_data *hapd, const u8 *src, |
| 70 | int wds); |
| 71 | |
| 72 | +#ifdef CONFIG_IEEE80211N |
| 73 | +void hostapd_trigger_20mhz(struct hostapd_iface *iface); |
| 74 | +void hostapd_deinit_ht(struct hostapd_iface *iface); |
| 75 | + |
| 76 | +#else |
| 77 | +static inline void hostapd_deinit_ht(struct hostapd_iface *iface) |
| 78 | +{ |
| 79 | +} |
| 80 | +static inline void hostapd_trigger_20mhz(struct hostapd_iface *iface) |
| 81 | +{ |
| 82 | +} |
| 83 | +#endif /* CONFIG_IEEE80211N */ |
| 84 | + |
| 85 | #endif /* IEEE802_11_H */ |
| 86 | --- a/src/ap/ieee802_11_ht.c |
| 87 | +++ b/src/ap/ieee802_11_ht.c |
| 88 | @@ -20,9 +20,11 @@ |
| 89 | #include "drivers/driver.h" |
| 90 | #include "hostapd.h" |
| 91 | #include "ap_config.h" |
| 92 | +#include "ap_drv_ops.h" |
| 93 | #include "sta_info.h" |
| 94 | #include "beacon.h" |
| 95 | #include "ieee802_11.h" |
| 96 | +#include "utils/eloop.h" |
| 97 | |
| 98 | |
| 99 | u8 * hostapd_eid_ht_capabilities(struct hostapd_data *hapd, u8 *eid) |
| 100 | @@ -70,12 +72,15 @@ u8 * hostapd_eid_ht_operation(struct hos |
| 101 | |
| 102 | oper->control_chan = hapd->iconf->channel; |
| 103 | oper->operation_mode = host_to_le16(hapd->iface->ht_op_mode); |
| 104 | - if (hapd->iconf->secondary_channel == 1) |
| 105 | - oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE | |
| 106 | - HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; |
| 107 | - if (hapd->iconf->secondary_channel == -1) |
| 108 | - oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW | |
| 109 | - HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; |
| 110 | + |
| 111 | + if (!hapd->iface->force_20mhz) { |
| 112 | + if (hapd->iconf->secondary_channel == 1) |
| 113 | + oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE | |
| 114 | + HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; |
| 115 | + if (hapd->iconf->secondary_channel == -1) |
| 116 | + oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW | |
| 117 | + HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; |
| 118 | + } |
| 119 | |
| 120 | pos += sizeof(*oper); |
| 121 | |
| 122 | @@ -265,3 +270,80 @@ void hostapd_get_ht_capab(struct hostapd |
| 123 | |
| 124 | neg_ht_cap->ht_capabilities_info = host_to_le16(cap); |
| 125 | } |
| 126 | + |
| 127 | +static void hostapd_set_force_20mhz(struct hostapd_iface *iface); |
| 128 | + |
| 129 | +static void hostapd_restore_40mhz(void *eloop_data, void *user_ctx) |
| 130 | +{ |
| 131 | + struct hostapd_iface *iface = eloop_data; |
| 132 | + struct os_time time; |
| 133 | + int timeout; |
| 134 | + |
| 135 | + if (!iface->last_20mhz_trigger.sec) |
| 136 | + return; |
| 137 | + |
| 138 | + os_get_time(&time); |
| 139 | + timeout = iface->last_20mhz_trigger.sec + iface->conf->dynamic_ht40 - |
| 140 | + time.sec; |
| 141 | + |
| 142 | + if (timeout > 0) { |
| 143 | + eloop_register_timeout(timeout, 0, hostapd_restore_40mhz, |
| 144 | + iface, NULL); |
| 145 | + return; |
| 146 | + } |
| 147 | + |
| 148 | + iface->last_20mhz_trigger.sec = 0; |
| 149 | + iface->last_20mhz_trigger.usec = 0; |
| 150 | + |
| 151 | + iface->force_20mhz = 0; |
| 152 | + hostapd_set_force_20mhz(iface); |
| 153 | +} |
| 154 | + |
| 155 | +static void hostapd_set_force_20mhz(struct hostapd_iface *iface) |
| 156 | +{ |
| 157 | + int secondary_channel; |
| 158 | + int i; |
| 159 | + |
| 160 | + ieee802_11_set_beacons(iface); |
| 161 | + |
| 162 | + for (i = 0; i < iface->num_bss; i++) { |
| 163 | + struct hostapd_data *hapd = iface->bss[i]; |
| 164 | + |
| 165 | + if (iface->force_20mhz) |
| 166 | + secondary_channel = 0; |
| 167 | + else |
| 168 | + secondary_channel = hapd->iconf->secondary_channel; |
| 169 | + |
| 170 | + if (hostapd_set_freq(hapd, hapd->iconf->hw_mode, iface->freq, |
| 171 | + hapd->iconf->channel, |
| 172 | + hapd->iconf->ieee80211n, |
| 173 | + secondary_channel)) { |
| 174 | + wpa_printf(MSG_ERROR, "Could not set channel for " |
| 175 | + "kernel driver"); |
| 176 | + } |
| 177 | + } |
| 178 | +} |
| 179 | + |
| 180 | +void hostapd_deinit_ht(struct hostapd_iface *iface) |
| 181 | +{ |
| 182 | + eloop_cancel_timeout(hostapd_restore_40mhz, iface, NULL); |
| 183 | +} |
| 184 | + |
| 185 | +void hostapd_trigger_20mhz(struct hostapd_iface *iface) |
| 186 | +{ |
| 187 | + if (!iface->conf->dynamic_ht40) |
| 188 | + return; |
| 189 | + |
| 190 | + if (!iface->force_20mhz) { |
| 191 | + iface->force_20mhz = 1; |
| 192 | + hostapd_set_force_20mhz(iface); |
| 193 | + } |
| 194 | + |
| 195 | + if (!iface->last_20mhz_trigger.sec) { |
| 196 | + eloop_cancel_timeout(hostapd_restore_40mhz, iface, NULL); |
| 197 | + eloop_register_timeout(iface->conf->dynamic_ht40, 0, |
| 198 | + hostapd_restore_40mhz, iface, NULL); |
| 199 | + } |
| 200 | + |
| 201 | + os_get_time(&iface->last_20mhz_trigger); |
| 202 | +} |
| 203 | |