| 1 | --- a/MAKEALL |
| 2 | +++ b/MAKEALL |
| 3 | @@ -730,6 +730,12 @@ LIST_arm=" \ |
| 4 | ## MIPS Systems (default = big endian) |
| 5 | ######################################################################### |
| 6 | |
| 7 | +LIST_ifxcpe=" \ |
| 8 | + easy50712 \ |
| 9 | + easy50712_DDR166M \ |
| 10 | + easy50712_DDR166M_ramboot \ |
| 11 | +" |
| 12 | + |
| 13 | LIST_mips4kc=" \ |
| 14 | incaip \ |
| 15 | qemu_mips \ |
| 16 | @@ -761,6 +767,7 @@ LIST_au1xx0=" \ |
| 17 | " |
| 18 | |
| 19 | LIST_mips=" \ |
| 20 | + ${LIST_ifxcpe} \ |
| 21 | ${LIST_mips4kc} \ |
| 22 | ${LIST_mips5kc} \ |
| 23 | ${LIST_au1xx0} \ |
| 24 | --- a/Makefile |
| 25 | +++ b/Makefile |
| 26 | @@ -447,7 +447,7 @@ $(obj)include/autoconf.mk: $(obj)include |
| 27 | set -e ; \ |
| 28 | : Extract the config macros ; \ |
| 29 | $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ |
| 30 | - sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ |
| 31 | + sed -n -f tools/scripts/define2mk.sed |sort > $@.tmp && \ |
| 32 | mv $@.tmp $@ |
| 33 | |
| 34 | ######################################################################### |
| 35 | @@ -3370,7 +3370,7 @@ incaip_config: unconfig |
| 36 | { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ |
| 37 | $(XECHO) "... with 150MHz system clock" ; \ |
| 38 | } |
| 39 | - @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip |
| 40 | + @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip infineon |
| 41 | |
| 42 | tb0229_config: unconfig |
| 43 | @$(MKCONFIG) $(@:_config=) mips mips tb0229 |
| 44 | @@ -3411,6 +3411,50 @@ vct_platinumavc_onenand_small_config: un |
| 45 | @$(MKCONFIG) -a vct mips mips vct micronas |
| 46 | |
| 47 | ######################################################################### |
| 48 | +## MIPS32 ifxcpe |
| 49 | +######################################################################### |
| 50 | + |
| 51 | +easy50712%config : unconfig |
| 52 | + @mkdir -p $(obj)include |
| 53 | + @mkdir -p $(obj)board/infineon/easy50712 |
| 54 | + @[ -z "$(findstring ramboot,$@)" ] || \ |
| 55 | + { echo "TEXT_BASE = 0xA0400000" >$(obj)board/infineon/easy50712/config.tmp ; \ |
| 56 | + echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \ |
| 57 | + $(XECHO) "... with ramboot configuration" ; \ |
| 58 | + } |
| 59 | + @if [ "$(findstring _DDR,$@)" ] ; then \ |
| 60 | + echo "#define CONFIG_USE_DDR_RAM" >>$(obj)include/config.h ; \ |
| 61 | + DDR=$(subst DDR,,$(filter DDR%,$(subst _, ,$@))); \ |
| 62 | + case "$${DDR}" in \ |
| 63 | + 111M|166M|e111M|e166M|promos400|samsung166|psc166) \ |
| 64 | + $(XECHO) "... with DDR RAM config $${DDR}" ; \ |
| 65 | + echo "#define CONFIG_USE_DDR_RAM_CFG_$${DDR}" >>$(obj)include/config.h ;; \ |
| 66 | + *) $(XECHO) "... DDR RAM config \\\"$${DDR}\\\" unknown, use default"; \ |
| 67 | + esac; \ |
| 68 | + fi |
| 69 | + @$(MKCONFIG) -a $(word 1,$(subst _, ,$@)) mips mips easy50712 infineon danube |
| 70 | + |
| 71 | +easy50812%config : unconfig |
| 72 | + @mkdir -p $(obj)include |
| 73 | + @mkdir -p $(obj)board/infineon/easy50812 |
| 74 | + @[ -z "$(findstring ramboot,$@)" ] || \ |
| 75 | + { echo "TEXT_BASE = 0xA0400000" >$(obj)board/infineon/easy50812/config.tmp ; \ |
| 76 | + echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \ |
| 77 | + $(XECHO) "... with ramboot configuration" ; \ |
| 78 | + } |
| 79 | + @if [ "$(findstring _DDR,$@)" ] ; then \ |
| 80 | + echo "#define CONFIG_USE_DDR_RAM" >>$(obj)include/config.h ; \ |
| 81 | + DDR=$(subst DDR,,$(filter DDR%,$(subst _, ,$@))); \ |
| 82 | + case "$${DDR}" in \ |
| 83 | + 111M|166M|e111M|e166M|promos400|samsung166|psc166) \ |
| 84 | + $(XECHO) "... with DDR RAM config $${DDR}" ; \ |
| 85 | + echo "#define CONFIG_USE_DDR_RAM_CFG_$${DDR}" >>$(obj)include/config.h ;; \ |
| 86 | + *) $(XECHO) "... DDR RAM config \\\"$${DDR}\\\" unknown, use default"; \ |
| 87 | + esac; \ |
| 88 | + fi |
| 89 | + @$(MKCONFIG) -a $(word 1,$(subst _, ,$@)) mips mips easy50812 infineon ar9 |
| 90 | + |
| 91 | +######################################################################### |
| 92 | ## MIPS32 AU1X00 |
| 93 | ######################################################################### |
| 94 | |
| 95 | --- a/drivers/net/Makefile |
| 96 | +++ b/drivers/net/Makefile |
| 97 | @@ -43,6 +43,7 @@ COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o |
| 98 | COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o |
| 99 | COBJS-$(CONFIG_FTMAC100) += ftmac100.o |
| 100 | COBJS-$(CONFIG_GRETH) += greth.o |
| 101 | +COBJS-$(CONFIG_IFX_ETOP) += ifx_etop.o |
| 102 | COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o |
| 103 | COBJS-$(CONFIG_KIRKWOOD_EGIGA) += kirkwood_egiga.o |
| 104 | COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o |
| 105 | --- a/drivers/serial/Makefile |
| 106 | +++ b/drivers/serial/Makefile |
| 107 | @@ -28,6 +28,7 @@ LIB := $(obj)libserial.a |
| 108 | COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o |
| 109 | COBJS-$(CONFIG_AT91RM9200_USART) += at91rm9200_usart.o |
| 110 | COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o |
| 111 | +COBJS-$(CONFIG_IFX_ASC) += ifx_asc.o |
| 112 | COBJS-$(CONFIG_MCFUART) += mcfuart.o |
| 113 | COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o |
| 114 | COBJS-$(CONFIG_SYS_NS16550) += ns16550.o |
| 115 | --- a/include/netdev.h |
| 116 | +++ b/include/netdev.h |
| 117 | @@ -57,6 +57,7 @@ int fecmxc_initialize (bd_t *bis); |
| 118 | int ftmac100_initialize(bd_t *bits); |
| 119 | int greth_initialize(bd_t *bis); |
| 120 | void gt6426x_eth_initialize(bd_t *bis); |
| 121 | +int ifx_etop_initialize(bd_t *bis); |
| 122 | int inca_switch_initialize(bd_t *bis); |
| 123 | int kirkwood_egiga_initialize(bd_t *bis); |
| 124 | int lan91c96_initialize(u8 dev_num, int base_addr); |
| 125 | @@ -85,6 +86,7 @@ int uec_standard_init(bd_t *bis); |
| 126 | int uli526x_initialize(bd_t *bis); |
| 127 | int sh_eth_initialize(bd_t *bis); |
| 128 | int dm9000_initialize(bd_t *bis); |
| 129 | +int lq_eth_initialize(bd_t * bis); |
| 130 | |
| 131 | /* Boards with PCI network controllers can call this from their board_eth_init() |
| 132 | * function to initialize whatever's on board. |
| 133 | |
