| 1 | --- a/drivers/usb/host/ohci-ssb.c |
| 2 | +++ b/drivers/usb/host/ohci-ssb.c |
| 3 | @@ -17,6 +17,8 @@ |
| 4 | */ |
| 5 | #include <linux/ssb/ssb.h> |
| 6 | |
| 7 | +extern int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **hcd); |
| 8 | +extern void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd); |
| 9 | |
| 10 | #define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29) |
| 11 | |
| 12 | @@ -24,6 +26,9 @@ struct ssb_ohci_device { |
| 13 | struct ohci_hcd ohci; /* _must_ be at the beginning. */ |
| 14 | |
| 15 | u32 enable_flags; |
| 16 | +#ifdef CONFIG_USB_EHCI_HCD_SSB |
| 17 | + struct usb_hcd *ehci_hcd; |
| 18 | +#endif |
| 19 | }; |
| 20 | |
| 21 | static inline |
| 22 | @@ -92,6 +97,9 @@ static const struct hc_driver ssb_ohci_h |
| 23 | static void ssb_ohci_detach(struct ssb_device *dev) |
| 24 | { |
| 25 | struct usb_hcd *hcd = ssb_get_drvdata(dev); |
| 26 | +#ifdef CONFIG_USB_EHCI_HCD_SSB |
| 27 | + struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); |
| 28 | +#endif |
| 29 | |
| 30 | if (hcd->driver->shutdown) |
| 31 | hcd->driver->shutdown(hcd); |
| 32 | @@ -99,6 +107,14 @@ static void ssb_ohci_detach(struct ssb_d |
| 33 | iounmap(hcd->regs); |
| 34 | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| 35 | usb_put_hcd(hcd); |
| 36 | + |
| 37 | +#ifdef CONFIG_USB_EHCI_HCD_SSB |
| 38 | + /* |
| 39 | + * Also detach ehci function |
| 40 | + */ |
| 41 | + if (dev->id.coreid == SSB_DEV_USB20_HOST) |
| 42 | + ssb_ehci_detach(dev, ohcidev->ehci_hcd); |
| 43 | +#endif |
| 44 | ssb_device_disable(dev, 0); |
| 45 | } |
| 46 | |
| 47 | @@ -121,6 +137,9 @@ static int ssb_ohci_attach(struct ssb_de |
| 48 | /* |
| 49 | * USB 2.0 special considerations: |
| 50 | * |
| 51 | + * Since the core supports both OHCI and EHCI functions, |
| 52 | + * it must only be reset once. |
| 53 | + * |
| 54 | * In addition to the standard SSB reset sequence, the Host |
| 55 | * Control Register must be programmed to bring the USB core |
| 56 | * and various phy components out of reset. |
| 57 | @@ -175,6 +194,14 @@ static int ssb_ohci_attach(struct ssb_de |
| 58 | |
| 59 | ssb_set_drvdata(dev, hcd); |
| 60 | |
| 61 | +#ifdef CONFIG_USB_EHCI_HCD_SSB |
| 62 | + /* |
| 63 | + * attach ehci function in this core |
| 64 | + */ |
| 65 | + if (dev->id.coreid == SSB_DEV_USB20_HOST) |
| 66 | + err = ssb_ehci_attach(dev, &(ohcidev->ehci_hcd)); |
| 67 | +#endif |
| 68 | + |
| 69 | return err; |
| 70 | |
| 71 | err_iounmap: |
| 72 | --- a/drivers/usb/host/ehci-ssb.c |
| 73 | +++ b/drivers/usb/host/ehci-ssb.c |
| 74 | @@ -106,10 +106,18 @@ static void ssb_ehci_detach(struct ssb_d |
| 75 | iounmap(hcd->regs); |
| 76 | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| 77 | usb_put_hcd(hcd); |
| 78 | +#ifndef CONFIG_USB_OHCI_HCD_SSB |
| 79 | + ssb_device_disable(dev, 0); |
| 80 | +#endif |
| 81 | ssb_device_disable(dev, 0); |
| 82 | } |
| 83 | +EXPORT_SYMBOL_GPL(ssb_ehci_detach); |
| 84 | |
| 85 | +#ifndef CONFIG_USB_OHCI_HCD_SSB |
| 86 | static int ssb_ehci_attach(struct ssb_device *dev) |
| 87 | +#else |
| 88 | +static int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **ehci_hcd) |
| 89 | +#endif |
| 90 | { |
| 91 | struct ssb_ehci_device *ehcidev; |
| 92 | struct usb_hcd *hcd; |
| 93 | @@ -120,6 +128,7 @@ static int ssb_ehci_attach(struct ssb_de |
| 94 | dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) |
| 95 | return -EOPNOTSUPP; |
| 96 | |
| 97 | +#ifndef CONFIG_USB_OHCI_HCD_SSB |
| 98 | /* |
| 99 | * USB 2.0 special considerations: |
| 100 | * |
| 101 | @@ -155,6 +164,7 @@ static int ssb_ehci_attach(struct ssb_de |
| 102 | tmp |= 0x1; |
| 103 | ssb_write32(dev, 0x89c, tmp); |
| 104 | } |
| 105 | +#endif |
| 106 | |
| 107 | hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev, |
| 108 | dev_name(dev->dev)); |
| 109 | @@ -175,7 +185,11 @@ static int ssb_ehci_attach(struct ssb_de |
| 110 | if (err) |
| 111 | goto err_iounmap; |
| 112 | |
| 113 | +#ifndef CONFIG_USB_OHCI_HCD_SSB |
| 114 | ssb_set_drvdata(dev, hcd); |
| 115 | +#else |
| 116 | + *ehci_hcd = hcd; |
| 117 | +#endif |
| 118 | |
| 119 | return err; |
| 120 | |
| 121 | @@ -187,7 +201,9 @@ err_dev_disable: |
| 122 | ssb_device_disable(dev, 0); |
| 123 | return err; |
| 124 | } |
| 125 | +EXPORT_SYMBOL_GPL(ssb_ehci_attach); |
| 126 | |
| 127 | +#ifndef CONFIG_USB_OHCI_HCD_SSB |
| 128 | static int ssb_ehci_probe(struct ssb_device *dev, |
| 129 | const struct ssb_device_id *id) |
| 130 | { |
| 131 | @@ -238,6 +254,7 @@ static int ssb_ehci_resume(struct ssb_de |
| 132 | #define ssb_ehci_suspend NULL |
| 133 | #define ssb_ehci_resume NULL |
| 134 | #endif /* CONFIG_PM */ |
| 135 | +#endif /* !CONFIG_USB_OHCI_HCD_SSB */ |
| 136 | |
| 137 | static const struct ssb_device_id ssb_ehci_table[] = { |
| 138 | SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), |
| 139 | @@ -245,6 +262,8 @@ static const struct ssb_device_id ssb_eh |
| 140 | }; |
| 141 | MODULE_DEVICE_TABLE(ssb, ssb_ehci_table); |
| 142 | |
| 143 | + |
| 144 | +#ifndef CONFIG_USB_OHCI_HCD_SSB |
| 145 | static struct ssb_driver ssb_ehci_driver = { |
| 146 | .name = KBUILD_MODNAME, |
| 147 | .id_table = ssb_ehci_table, |
| 148 | @@ -253,3 +272,4 @@ static struct ssb_driver ssb_ehci_driver |
| 149 | .suspend = ssb_ehci_suspend, |
| 150 | .resume = ssb_ehci_resume, |
| 151 | }; |
| 152 | +#endif |
| 153 | --- a/drivers/usb/host/ehci-hcd.c |
| 154 | +++ b/drivers/usb/host/ehci-hcd.c |
| 155 | @@ -1324,17 +1324,21 @@ static int __init ehci_hcd_init(void) |
| 156 | goto clean4; |
| 157 | #endif |
| 158 | |
| 159 | +#ifndef CONFIG_USB_OHCI_HCD_SSB |
| 160 | #ifdef SSB_EHCI_DRIVER |
| 161 | retval = ssb_driver_register(&SSB_EHCI_DRIVER); |
| 162 | if (retval < 0) |
| 163 | goto clean5; |
| 164 | #endif |
| 165 | +#endif /* !CONFIG_USB_OHCI_HCD_SSB */ |
| 166 | return retval; |
| 167 | |
| 168 | +#ifndef CONFIG_USB_OHCI_HCD_SSB |
| 169 | #ifdef SSB_EHCI_DRIVER |
| 170 | /* ssb_driver_unregister(&SSB_EHCI_DRIVER); */ |
| 171 | clean5: |
| 172 | #endif |
| 173 | +#endif /* !CONFIG_USB_OHCI_HCD_SSB */ |
| 174 | #ifdef XILINX_OF_PLATFORM_DRIVER |
| 175 | of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER); |
| 176 | clean4: |
| 177 | @@ -1367,9 +1371,11 @@ module_init(ehci_hcd_init); |
| 178 | |
| 179 | static void __exit ehci_hcd_cleanup(void) |
| 180 | { |
| 181 | +#ifndef CONFIG_USB_OHCI_HCD_SSB |
| 182 | #ifdef SSB_EHCI_DRIVER |
| 183 | ssb_driver_unregister(&SSB_EHCI_DRIVER); |
| 184 | #endif |
| 185 | +#endif /* !CONFIG_USB_OHCI_HCD_SSB */ |
| 186 | #ifdef XILINX_OF_PLATFORM_DRIVER |
| 187 | of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER); |
| 188 | #endif |
| 189 | |
